Animations tutorial

This tutorial shows you how to build explicit animations in Flutter. After introducing some of the essential concepts, classes, and methods in the animation library, it walks you through 5 animation examples. The examples build on each other, introducing you to different aspects of the animation library.

The Flutter SDK also provides transition animations, such as FadeTransition, SizeTransition, and SlideTransition. These simple animations are triggered by setting a beginning and ending point. They are simpler to implement than explicit animations, which are described here.

Essential animation concepts and classes

The animation system in Flutter is based on typed Animation objects. Widgets can either incorporate these animations in their build functions directly by reading their current value and listening to their state changes or they can use the animations as the basis of more elaborate animations that they pass along to other widgets.

Animation<double>

In Flutter, an Animation object knows nothing about what is onscreen. An Animation is an abstract class that understands its current value and its state (completed or dismissed). One of the more commonly used animation types is Animation<double>.

An Animation object sequentially generates interpolated numbers between two values over a certain duration. The output of an Animation object may be linear, a curve, a step function, or any other mapping you can devise. Depending on how the Animation object is controlled, it could run in reverse, or even switch directions in the middle.

Animations can also interpolate types other than double, such as Animation<Color> or Animation<Size>.

An Animation object has state. Its current value is always available in the .value member.

An Animation object knows nothing about rendering or build() functions.

Curved­Animation

A CurvedAnimation defines the animation’s progress as a non-linear curve.

animation = CurvedAnimation(parent: controller, curve: Curves.easeIn);

CurvedAnimation and AnimationController (described in the next section) are both of type Animation<double>, so you can pass them interchangeably. The CurvedAnimation wraps the object it’s modifying—you don’t subclass AnimationController to implement a curve.

Animation­Controller

AnimationController is a special Animation object that generates a new value whenever the hardware is ready for a new frame. By default, an AnimationController linearly produces the numbers from 0.0 to 1.0 during a given duration. For example, this code creates an Animation object, but does not start it running:

controller =
    AnimationController(duration: const Duration(seconds: 2), vsync: this);

AnimationController derives from Animation<double>, so it can be used wherever an Animation object is needed. However, the AnimationController has additional methods to control the animation. For example, you start an animation with the .forward() method. The generation of numbers is tied to the screen refresh, so typically 60 numbers are generated per second. After each number is generated, each Animation object calls the attached Listener objects. To create a custom display list for each child, see RepaintBoundary.

When creating an AnimationController, you pass it a vsync argument. The presence of vsync prevents offscreen animations from consuming unnecessary resources. You can use your stateful object as the vsync by adding SingleTickerProviderStateMixin to the class definition. You can see an example of this in animate1 on GitHub.

Tween

By default, the AnimationController object ranges from 0.0 to 1.0. If you need a different range or a different data type, you can use a Tween to configure an animation to interpolate to a different range or data type. For example, the following Tween goes from -200.0 to 0.0:

tween = Tween<double>(begin: -200, end: 0);

A Tween is a stateless object that takes only begin and end. The sole job of a Tween is to define a mapping from an input range to an output range. The input range is commonly 0.0 to 1.0, but that’s not a requirement.

A Tween inherits from Animatable<T>, not from Animation<T>. An Animatable, like Animation, doesn’t have to output double. For example, ColorTween specifies a progression between two colors.

colorTween = ColorTween(begin: Colors.transparent, end: Colors.black54);

A Tween object does not store any state. Instead, it provides the evaluate(Animation<double> animation) method that applies the mapping function to the current value of the animation. The current value of the Animation object can be found in the .value method. The evaluate function also performs some housekeeping, such as ensuring that begin and end are returned when the animation values are 0.0 and 1.0, respectively.

Tween.animate

To use a Tween object, call animate() on the Tween, passing in the controller object. For example, the following code generates the integer values from 0 to 255 over the course of 500 ms.

AnimationController controller = AnimationController(
    duration: const Duration(milliseconds: 500), vsync: this);
Animation<int> alpha = IntTween(begin: 0, end: 255).animate(controller);

The following example shows a controller, a curve, and a Tween:

AnimationController controller = AnimationController(
    duration: const Duration(milliseconds: 500), vsync: this);
final Animation curve =
    CurvedAnimation(parent: controller, curve: Curves.easeOut);
Animation<int> alpha = IntTween(begin: 0, end: 255).animate(curve);

Animation notifications

An Animation object can have Listeners and StatusListeners, defined with addListener() and addStatusListener(). A Listener is called whenever the value of the animation changes. The most common behavior of a Listener is to call setState() to cause a rebuild. A StatusListener is called when an animation begins, ends, moves forward, or moves reverse, as defined by AnimationStatus. The next section has an example of the addListener() method, and Monitoring the progress of the animation shows an example of addStatusListener().

Animation examples

This section walks you through 5 animation examples. Each section provides a link to the source code for that example.

Rendering animations

So far you’ve learned how to generate a sequence of numbers over time. Nothing has been rendered to the screen. To render with an Animation object, store the Animation object as a member of your widget, then use its value to decide how to draw.

Consider the following app that draws the Flutter logo without animation:

import 'package:flutter/material.dart';

void main() => runApp(LogoApp());

class LogoApp extends StatefulWidget {
  _LogoAppState createState() => _LogoAppState();
}

class _LogoAppState extends State<LogoApp> {
  @override
  Widget build(BuildContext context) {
    return Center(
      child: Container(
        margin: EdgeInsets.symmetric(vertical: 10),
        height: 300,
        width: 300,
        child: FlutterLogo(),
      ),
    );
  }
}

App source: animate0

The following shows the same code modified to animate the logo to grow from nothing to full size. When defining an AnimationController, you must pass in a vsync object. The vsync parameter is described in the AnimationController section.

The changes from the non-animated example are highlighted:

App source: animate1

The addListener() function calls setState(), so every time the Animation generates a new number, the current frame is marked dirty, which forces build() to be called again. In build(), the container changes size because its height and width now use animation.value instead of a hardcoded value. Dispose of the controller when the animation is finished to prevent memory leaks.

With these few changes, you’ve created your first animation in Flutter!

Simplifying with Animated­Widget

The AnimatedWidget base class allows you to separate out the core widget code from the animation code. AnimatedWidget doesn’t need to maintain a State object to hold the animation. Add the following AnimatedLogo class:

class AnimatedLogo extends AnimatedWidget {
  AnimatedLogo({Key key, Animation<double> animation})
      : super(key: key, listenable: animation);

  Widget build(BuildContext context) {
    final Animation<double> animation = listenable;
    return Center(
      child: Container(
        margin: EdgeInsets.symmetric(vertical: 10),
        height: animation.value,
        width: animation.value,
        child: FlutterLogo(),
      ),
    );
  }
}

AnimatedLogo uses the current value of the animation when drawing itself.

The LogoApp still manages the AnimationController and the Tween, and it passes the Animation object to AnimatedLogo:

App source: animate2

Monitoring the progress of the animation

It’s often helpful to know when an animation changes state, such as finishing, moving forward, or reversing. You can get notifications for this with addStatusListener(). The following code modifies the previous example so that it listens for a state change and prints an update. The highlighted line shows the change:

class _LogoAppState extends State<LogoApp> with SingleTickerProviderStateMixin {
  Animation<double> animation;
  AnimationController controller;

  @override
  void initState() {
    super.initState();
    controller =
        AnimationController(duration: const Duration(seconds: 2), vsync: this);
    animation = Tween<double>(begin: 0, end: 300).animate(controller)
      ..addStatusListener((state) => print('$state'));
    controller.forward();
  }
  // ...
}

Running this code produces this output:

AnimationStatus.forward
AnimationStatus.completed

Next, use addStatusListener() to reverse the animation at the beginning or the end. This creates a “breathing” effect:

App source: animate3

Refactoring with AnimatedBuilder

One problem with the code in the animate3 example, is that changing the animation required changing the widget that renders the logo. A better solution is to separate responsibilities into different classes:

• Render the logo
• Define the Animation object
• Render the transition

You can accomplish this separation with the help of the AnimatedBuilder class. An AnimatedBuilder is a separate class in the render tree. Like AnimatedWidget, AnimatedBuilder automatically listens to notifications from the Animation object, and marks the widget tree dirty as necessary, so you don’t need to call addListener().

The widget tree for the animate4 example looks like this:

Starting from the bottom of the widget tree, the code for rendering the logo is straightforward:

class LogoWidget extends StatelessWidget {
  // Leave out the height and width so it fills the animating parent
  Widget build(BuildContext context) => Container(
        margin: EdgeInsets.symmetric(vertical: 10),
        child: FlutterLogo(),
      );
}

The middle three blocks in the diagram are all created in the build() method in GrowTransition, shown below. The GrowTransition widget itself is stateless and holds the set of final variables necessary to define the transition animation. The build() function creates and returns the AnimatedBuilder, which takes the (Anonymous builder) method and the LogoWidget object as parameters. The work of rendering the transition actually happens in the (Anonymous builder) method, which creates a Container of the appropriate size to force the LogoWidget to shrink to fit.

One tricky point in the code below is that the child looks like it’s specified twice. What’s happening is that the outer reference of child is passed to AnimatedBuilder, which passes it to the anonymous closure, which then uses that object as its child. The net result is that the AnimatedBuilder is inserted in between the two widgets in the render tree.

class GrowTransition extends StatelessWidget {
  GrowTransition({this.child, this.animation});

  final Widget child;
  final Animation<double> animation;

  Widget build(BuildContext context) => Center(
        child: AnimatedBuilder(
            animation: animation,
            builder: (context, child) => Container(
                  height: animation.value,
                  width: animation.value,
                  child: child,
                ),
            child: child),
      );
}

Finally, the code to initialize the animation looks very similar to the animate2 example. The initState() method creates an AnimationController and a Tween, then binds them with animate(). The magic happens in the build() method, which returns a GrowTransition object with a LogoWidget as a child, and an animation object to drive the transition. These are the three elements listed in the bullet points above.

App source: animate4

Simultaneous animations

In this section, you’ll build on the example from monitoring the progress of the animation (animate3), which used AnimatedWidget to animate in and out continuously. Consider the case where you want to animate in and out while the opacity animates from transparent to opaque.

Each tween manages an aspect of the animation. For example:

controller =
    AnimationController(duration: const Duration(seconds: 2), vsync: this);
sizeAnimation = Tween<double>(begin: 0, end: 300).animate(controller);
opacityAnimation = Tween<double>(begin: 0.1, end: 1).animate(controller);

You can get the size with sizeAnimation.value and the opacity with opacityAnimation.value, but the constructor for AnimatedWidget only takes a single Animation object. To solve this problem, the example creates its own Tween objects and explicitly calculates the values.

Change AnimatedLogo to encapsulate its own Tween objects, and its build() method calls Tween.evaluate() on the parent’s animation object to calculate the required size and opacity values. The following code shows the changes with highlights:

class AnimatedLogo extends AnimatedWidget {
  // Make the Tweens static because they don't change.
  static final _opacityTween = Tween<double>(begin: 0.1, end: 1);
  static final _sizeTween = Tween<double>(begin: 0, end: 300);

  AnimatedLogo({Key key, Animation<double> animation})
      : super(key: key, listenable: animation);

  Widget build(BuildContext context) {
    final Animation<double> animation = listenable;
    return Center(
      child: Opacity(
        opacity: _opacityTween.evaluate(animation),
        child: Container(
          margin: EdgeInsets.symmetric(vertical: 10),
          height: _sizeTween.evaluate(animation),
          width: _sizeTween.evaluate(animation),
          child: FlutterLogo(),
        ),
      ),
    );
  }
}

class LogoApp extends StatefulWidget {
  _LogoAppState createState() => _LogoAppState();
}

class _LogoAppState extends State<LogoApp> with SingleTickerProviderStateMixin {
  Animation<double> animation;
  AnimationController controller;

  @override
  void initState() {
    super.initState();
    controller =
        AnimationController(duration: const Duration(seconds: 2), vsync: this);
    animation = CurvedAnimation(parent: controller, curve: Curves.easeIn)
      ..addStatusListener((status) {
        if (status == AnimationStatus.completed) {
          controller.reverse();
        } else if (status == AnimationStatus.dismissed) {
          controller.forward();
        }
      });
    controller.forward();
  }

  @override
  Widget build(BuildContext context) => AnimatedLogo(animation: animation);

  @override
  void dispose() {
    controller.dispose();
    super.dispose();
  }
}

App source: animate5

Next steps

This tutorial gives you a foundation for creating animations in Flutter using Tweens, but there are many other classes to explore. You might investigate the specialized Tween classes, animations specific to Material Design, ReverseAnimation, shared element transitions (also known as Hero animations), physics simulations and fling() methods. See the animations landing page for the latest available documents and examples.