磁盘
以下各节的脚本展示了如何监控磁盘和I/O活动。
统计磁盘读写状况
本节展示了如何找出磁盘读写最频繁的进程。
disktop.stp
#!/usr/bin/env stap
#
# Copyright (C) 2007 Oracle Corp.
#
# Get the status of reading/writing disk every 5 seconds,
# output top ten entries
#
# This is free software,GNU General Public License (GPL);
# either version 2, or (at your option) any later version.
#
# Usage:
# ./disktop.stp
#
global io_stat,device
global read_bytes,write_bytes
probe vfs.read.return {
if ($return>0) {
if (devname!="N/A") {/*skip read from cache*/
io_stat[pid(),execname(),uid(),ppid(),"R"] += $return
device[pid(),execname(),uid(),ppid(),"R"] = devname
read_bytes += $return
}
}
}
probe vfs.write.return {
if ($return>0) {
if (devname!="N/A") { /*skip update cache*/
io_stat[pid(),execname(),uid(),ppid(),"W"] += $return
device[pid(),execname(),uid(),ppid(),"W"] = devname
write_bytes += $return
}
}
}
probe timer.ms(5000) {
/* skip non-read/write disk */
if (read_bytes+write_bytes) {
printf("\n%-25s, %-8s%4dKb/sec, %-7s%6dKb, %-7s%6dKb\n\n",
ctime(gettimeofday_s()),
"Average:", ((read_bytes+write_bytes)/1024)/5,
"Read:",read_bytes/1024,
"Write:",write_bytes/1024)
/* print header */
printf("%8s %8s %8s %25s %8s %4s %12s\n",
"UID","PID","PPID","CMD","DEVICE","T","BYTES")
}
/* print top ten I/O */
foreach ([process,cmd,userid,parent,action] in io_stat- limit 10)
printf("%8d %8d %8d %25s %8s %4s %12d\n",
userid,process,parent,cmd,
device[process,cmd,userid,parent,action],
action,io_stat[process,cmd,userid,parent,action])
/* clear data */
delete io_stat
delete device
read_bytes = 0
write_bytes = 0
}
probe end{
delete io_stat
delete device
delete read_bytes
delete write_bytes
}
disktop.stp输出磁盘读写最频繁的十个进程，包含各个进程的以下数据：
- UID - 进程所有者的UID
- PID - 进程的PID
- PPID - 进程的父进程的PID
- CMD - 进程的名字
- DEVICE - 读/写的设备名
- T - 进程的操作；
W是写，而R是读。 - BYTES - 读/写的数据量
disktop.stp使用ctime()和gettimeofday_s()输出当前时间。gettimeofday_s返回当前时间自epoch（1970年1月1日）以来的秒数，ctime把它转化成可读的时间戳。 在这个脚本中，$return是一个存储着虚拟文件系统读写的字节数的本地变量。$return只能在函数返回事件探针中使用（比如这里的vfs.read.return和vfs.write.return）。
以下是本节脚本的输出：
[...]
Mon Sep 29 03:38:28 2008 , Average: 19Kb/sec, Read: 7Kb, Write: 89Kb
UID PID PPID CMD DEVICE T BYTES
0 26319 26294 firefox sda5 W 90229
0 2758 2757 pam_timestamp_c sda5 R 8064
0 2885 1 cupsd sda5 W 1678
Mon Sep 29 03:38:38 2008 , Average: 1Kb/sec, Read: 7Kb, Write: 1Kb
UID PID PPID CMD DEVICE T BYTES
0 2758 2757 pam_timestamp_c sda5 R 8064
0 2885 1 cupsd sda5 W 1678
追踪对任意文件的读写
本节展示如何监控各进程读/写任意文件所花费的时间。这可以帮助你发现系统中加载时间过长的文件。
iotime.stp
#! /usr/bin/env stap
/*
* Copyright (C) 2006-2007 Red Hat Inc.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU General Public License v.2.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Print out the amount of time spent in the read and write systemcall
* when each file opened by the process is closed. Note that the systemtap
* script needs to be running before the open operations occur for
* the script to record data.
*
* This script could be used to to find out which files are slow to load
* on a machine. e.g.
*
* stap iotime.stp -c 'firefox'
*
* Output format is:
* timestamp pid (executabable) info_type path ...
*
* 200283135 2573 (cupsd) access /etc/printcap read: 0 write: 7063
* 200283143 2573 (cupsd) iotime /etc/printcap time: 69
*
*/
global start
global time_io
function timestamp:long() { return gettimeofday_us() - start }
function proc:string() { return sprintf("%d (%s)", pid(), execname()) }
probe begin { start = gettimeofday_us() }
global filehandles, fileread, filewrite
probe syscall.open.return {
filename = user_string($filename)
if ($return != -1) {
filehandles[pid(), $return] = filename
} else {
printf("%d %s access %s fail\n", timestamp(), proc(), filename)
}
}
probe syscall.read.return {
p = pid()
fd = $fd
bytes = $return
time = gettimeofday_us() - @entry(gettimeofday_us())
if (bytes > 0)
fileread[p, fd] += bytes
time_io[p, fd] <<< time
}
probe syscall.write.return {
p = pid()
fd = $fd
bytes = $return
time = gettimeofday_us() - @entry(gettimeofday_us())
if (bytes > 0)
filewrite[p, fd] += bytes
time_io[p, fd] <<< time
}
probe syscall.close {
if ([pid(), $fd] in filehandles) {
printf("%d %s access %s read: %d write: %d\n",
timestamp(), proc(), filehandles[pid(), $fd],
fileread[pid(), $fd], filewrite[pid(), $fd])
if (@count(time_io[pid(), $fd]))
printf("%d %s iotime %s time: %d\n", timestamp(), proc(),
filehandles[pid(), $fd], @sum(time_io[pid(), $fd]))
}
delete fileread[pid(), $fd]
delete filewrite[pid(), $fd]
delete filehandles[pid(), $fd]
delete time_io[pid(),$fd]
}
iotime.stp跟踪每次open、close、read和write系统调用。对于访问到的每个文件，iotime.stp都会计算读写操作花费的时间和读写的数据量（以字节为单位）。 虽然我们可以在读写事件（syscall.read和syscall.write）中使用本地变量$count，但是$count存储的是系统调用想要读写的数据量，要获取实际读写到的数据量需要使用$return。
[...]
825946 3364 (NetworkManager) access /sys/class/net/eth0/carrier read: 8190 write: 0
825955 3364 (NetworkManager) iotime /sys/class/net/eth0/carrier time: 9
[...]
117061 2460 (pcscd) access /dev/bus/usb/003/001 read: 43 write: 0
117065 2460 (pcscd) iotime /dev/bus/usb/003/001 time: 7
[...]
3973737 2886 (sendmail) access /proc/loadavg read: 4096 write: 0
3973744 2886 (sendmail) iotime /proc/loadavg time: 11
[...]
本节的脚本会输出以下数据：
- 时间戳，精确到毫秒
- PID和进程名
- access或iotime
- 访问的文件
如果一个进程读写了数据，你会看到access和iotime成对出现。access那一行的时间戳表示进程访问了文件；在结尾处会输出读写的数据（以字节为单位）。iotime那一行会输出读写消耗的时间（以毫秒为单位）。如果一行access后面没有iotime，意味着进程没有读写到数据。
追踪I/O的累计总量
本节展示如何累计I/O总量。
traceio.stp
#! /usr/bin/env stap
# traceio.stp
# Copyright (C) 2007 Red Hat, Inc., Eugene Teo <[email protected]>
# Copyright (C) 2009 Kai Meyer <[email protected]>
# Fixed a bug that allows this to run longer
# And added the humanreadable function
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
global reads, writes, total_io
probe vfs.read.return {
if ($return > 0) {
reads[pid(),execname()] += $return
total_io[pid(),execname()] += $return
}
}
probe vfs.write.return {
if ($return > 0) {
writes[pid(),execname()] += $return
total_io[pid(),execname()] += $return
}
}
function humanreadable(bytes) {
if (bytes > 1024*1024*1024) {
return sprintf("%d GiB", bytes/1024/1024/1024)
} else if (bytes > 1024*1024) {
return sprintf("%d MiB", bytes/1024/1024)
} else if (bytes > 1024) {
return sprintf("%d KiB", bytes/1024)
} else {
return sprintf("%d B", bytes)
}
}
probe timer.s(1) {
foreach([p,e] in total_io- limit 10)
printf("%8d %15s r: %12s w: %12s\n",
p, e, humanreadable(reads[p,e]),
humanreadable(writes[p,e]))
printf("\n")
# Note we don't zero out reads, writes and total_io,
# so the values are cumulative since the script started.
}
traceio.stp逐秒输出累计I/O最频繁的前十个进程。此外，它还会累计每个进程的I/O情况。注意该脚本跟开头找出磁盘读写最频繁的进程的脚本一样，也通过本地变量$return获取实际的读写数据量
[...]
Xorg r: 583401 KiB w: 0 KiB
floaters r: 96 KiB w: 7130 KiB
multiload-apple r: 538 KiB w: 537 KiB
sshd r: 71 KiB w: 72 KiB
pam_timestamp_c r: 138 KiB w: 0 KiB
staprun r: 51 KiB w: 51 KiB
snmpd r: 46 KiB w: 0 KiB
pcscd r: 28 KiB w: 0 KiB
irqbalance r: 27 KiB w: 4 KiB
cupsd r: 4 KiB w: 18 KiB
Xorg r: 588140 KiB w: 0 KiB
floaters r: 97 KiB w: 7143 KiB
multiload-apple r: 543 KiB w: 542 KiB
sshd r: 72 KiB w: 72 KiB
pam_timestamp_c r: 138 KiB w: 0 KiB
staprun r: 51 KiB w: 51 KiB
snmpd r: 46 KiB w: 0 KiB
pcscd r: 28 KiB w: 0 KiB
irqbalance r: 27 KiB w: 4 KiB
cupsd r: 4 KiB w: 18 KiB
监控指定设备的I/O
本节展示如何监控指定设备的I/O活动。
traceio2.stp
#! /usr/bin/env stap
global device_of_interest
probe begin {
/* The following is not the most efficient way to do this.
One could directly put the result of usrdev2kerndev()
into device_of_interest. However, want to test out
the other device functions */
dev = usrdev2kerndev($1)
device_of_interest = MKDEV(MAJOR(dev), MINOR(dev))
}
probe vfs.write, vfs.read
{
if (dev == device_of_interest)
printf ("%s(%d) %s 0x%x\n",
execname(), pid(), ppfunc(), dev)
}
traceio2.stp接受一个参数：设备号，要想获取名为directory的文件夹所在设备的设备号，使用stat -c "0x%D" directory。 usrdev2kerndev()把设备号转化成内核理解的格式。usrdev2kerndev()的输出经过MAJOR()和MINOR()处理，分别得到主设备号和次设备号，再经过MKDEV()处理，得到内核里对应的设备号。 traceio2.stp的输出包括了读/写进程的名字和PID，所调用的函数（vfs_read或vfs_write）和内核里对应的设备号。
下面是stap traceio2.stp 0x805的输出，其中0x805是/home的设备号。/home位于/dev/sda5，正是我们想要监控的设备。
[...]
synergyc(3722) vfs_read 0x800005
synergyc(3722) vfs_read 0x800005
cupsd(2889) vfs_write 0x800005
cupsd(2889) vfs_write 0x800005
cupsd(2889) vfs_write 0x800005
[...]
监控对指定文件的读写
本节展示如何实时监控对指定文件的读写。
inodewatch.stp
#! /usr/bin/env stap
probe vfs.write, vfs.read
{
# dev and ino are defined by vfs.write and vfs.read
if (dev == MKDEV($1,$2) # major/minor device
&& ino == $3)
printf ("%s(%d) %s 0x%x/%u\n",
execname(), pid(), ppfunc(), dev, ino)
}
inodewatch.stp从命令行中依次获取如下参数：
- 文件的主设备号
- 文件的次设备号
- 文件的inode号
要获取上述信息，使用stat -c '%D %i' filename，注意filename取绝对路径。 比如：要监控/etc/crontab，先运行stat -c '%D %i' /etc/crontab。应该会有如下输出：
805 1078319
805是十六进制的设备号。最小的两位是次设备号，其余是主设备号。1078319是inode号。要监控/etc/crontab，运行stap inodewatch.stp 0x8 0x05 1078319.（加0x以表示这是十六进制的数）
该命令的输出包括进程名和进程PID，以及调用的函数（vfs_read或vfs_write），设备号（以十六进制的格式输出）和inode号。下面就是stap inodewatch.stp 0x8 0x05 1078319的输出（当脚本运行时，/etc/crontab也正在执行中）：
cat(16437) vfs_read 0x800005/1078319
cat(16437) vfs_read 0x800005/1078319
监控对指定文件的属性的修改
本节展示如何实时监控对指定文件的属性的修改。
inodewatch2.stp
#! /usr/bin/env stap
global ATTR_MODE = 1
probe kernel.function("setattr_copy")!,
kernel.function("generic_setattr")!,
kernel.function("inode_setattr") {
dev_nr = $inode->i_sb->s_dev
inode_nr = $inode->i_ino
if (dev_nr == MKDEV($1,$2) # major/minor device
&& inode_nr == $3
&& $attr->ia_valid & ATTR_MODE)
printf ("%s(%d) %s 0x%x/%u %o %d\n",
execname(), pid(), ppfunc(), dev_nr, inode_nr, $attr->ia_mode, uid())
}
跟上一节的脚本类似，inodewatch2.stp也需要提供目标文件的设备号和inode号作为参数。用上一节的方法可以获取这些数据。 inodewatch.stp的输出也类似于上一节的脚本，不过inodewatch.stp还包括文件属性的变化，和对应用户的UID。下面就是监控/home/joe/bigfile时，用户job执行chmod 777 /home/joe/bigfile和chmod 666 /home/joe/bigfile后的输出：
chmod(17448) inode_setattr 0x800005/6011835 100777 500
chmod(17449) inode_setattr 0x800005/6011835 100666 500
定期输出块I/O等待时间
本节展示如何跟踪每个块I/O的等待时间。这可以帮助你发现给定时间内块I/O操作是否排起了长队。
ioblktime.stp
#! /usr/bin/env stap
global req_time%[25000], etimes
probe ioblock.request
{
req_time[$bio] = gettimeofday_us()
}
probe ioblock.end
{
t = gettimeofday_us()
s = req_time[$bio]
delete req_time[$bio]
if (s) {
etimes[devname, bio_rw_str(rw)] <<< t - s
}
}
/* for time being delete things that get merged with others */
probe kernel.trace("block_bio_frontmerge"),
kernel.trace("block_bio_backmerge")
{
delete req_time[$bio]
}
probe timer.s(10), end {
ansi_clear_screen()
printf("%10s %3s %10s %10s %10s\n",
"device", "rw", "total (us)", "count", "avg (us)")
foreach ([dev,rw] in etimes - limit 20) {
printf("%10s %3s %10d %10d %10d\n", dev, rw,
@sum(etimes[dev,rw]), @count(etimes[dev,rw]), @avg(etimes[dev,rw]))
}
delete etimes
}
ioblktime.stp计算每个设备上块I/O平均等待时间，每10秒更新一次。你可以修改probe timer.s(10), end {来更改刷新频率。 有时候，在设备上的块I/O操作实在太多，以致于超过了默认的MAXMAPENTRIES值。如果你在定义数组时没有指定大小，SystemTap会以MAXMAPENTRIES作为数组的最大长度。它的默认值是2048,不过你可以使用stap命令的选项-DMAXMAPENTRIES=10000来指定该变量的值。
device rw total (us) count avg (us)
sda W 9659 6 1609
dm-0 W 20278 6 3379
dm-0 R 20524 5 4104
sda R 19277 5 3855
上面的输出展示了设备名，操作类型（rw），总等待时间（total(us)），操作数（count），和平均等待时间（avg(us)）。这里面的时间都是以毫秒为单位。