Minecraft Script Documentation
Update 0.2.3: All Changes
Minecraft Script is a programming language for developers of mcfunctions, Minecraft maps and packages. The .mcscript files are therefore compiled and generated to the function format. This enables the developer extended possibilities, such as Modals, Loops, Varibles, Constants and Command-Wrapping.
Visit the official Website for information, guides and videos: https://mcscript.stevertus.com
German documentation here
Table of Contents
Installation
The Compiler gets offered as Node.js/ Package that is installed locally on your machine. It enables much more features than the online version
For example: compile all files in a directory, direct output in new files, watch your files on changes, etc.
1.1 Installation of Node.js
The installation requires the Node.js environment and the Node Package Manager.
This is achieved the best way by using the installer: nodejs.org/en/download/
Just run it and install.
1.2 Installation of Minecraft Script
Now open your PCs console. (search CMD).
There you have to type in this command:
npm install -g mcscript
If a successful answer apears you have done everything right and can start.
CLI Commands
You can now use the tool by launching the Command Line in your datapacks folder
(with Shift + rightclick on directory -> open command line)
Now you can use the commands like that:
2.1 mcscript new
Creates a new datapack for you with all basic files in a scripts folder. Takes as argument the datapack id!
2.2 mcscript compile
This command converts all .mcscript files into .mcfunction format. You can read here what you can do in the mcscript files.
The console displays all generated files or throws an error if something was not correct.
Alternatively you can use mcscript compile *filepath* to set an custom directory or file.With an additional -fullErr flag you can view full errors and code positions.
2.3 mcscript watch
This will automatically compile your code if you make any changes (save). So you do not have to enter the above command with every change.
Again, a path and -fullErr can be specified.
2.4 mcscript add [url or package]
This command adds a custom datapack to your directory.As argument an url to the resource or a mcScript Extension name can be used.
Get a list of all supported packages by running justmcscript add
2.5 Dev: mcscript modals
!!This command is intended only for developers who want to install their modals in the compiler.
A file must be specified and then the modals out of this file are written to a configuration file.
3) File system
3.1 File setup
The generated files have always the same name as their root.
A custom name can be set with #file: *name*.
Please without .mcfunction!!
Instead of the name, you can enter a whole path where the new file should be:
#file: C:/test/new#file: ./new(in same directory)#file: ./subfolder/new#file: ../new(a directory above)#file: ../subfolder/new
You can also specify several files:
#file: new
//commands here
#file: two
//Commands for two
Also very well combinable with for-loops:
#file: new
//commands here
for(1,5){
#file: test$(i)
//Commands for every file here
}
3.2 Extend Files
A already existing file, that is generated before with #file:, can be expanded in other files and new code is easily attached:
#extend: ./test
/commands here
3.3 Global Files
Variables (#vars), [constants] (#consts), and [Modals] (#modals) are stored separately for each file.Now you can create a global file with the extension '. gl. mcscript '. The compiler automatically detects globals and uses the declared objects in other files as well.For example, you can write the modals to a separate file.
Minecraft Script Syntax
The code is written in files with the extension .mcscript. It is recommended to manage the files and to highlight the syntax in a code editor (IDE). explore more here.
Unlike mcfunction, each command is injected with a "/" or "run:".
Comments are announced with "//", if comments should also appear in the new file with "#"
Blank lines and skipping lines are ignored.
If a blank line is desired in the mcfunction, express this with a '#' without a comment.
Two blank lines are reached with "##".
A comment across multiple lines can be expressed with:
/*
comment
*/
4.1 Command Grouping / Wrapping
[subcommand]([argument]){ [wrapped actions] }
"as, at, positioned,align,in,dimension,rotated,anchored" can be grouped together:
as(@a){
/commands => /execute positioned ~ ~ ~ run command
}
The Argument / Arguments in the brackets have to be a string! (with ' ' or " ")It is also possible to use asat() for this:
asat(@s){
/commands => execute as @s at @s run commands
}
"Groups can be listed like so:
as(@p), at(@s), positioned('~ ~1 ~'){
/say command
}
==> /execute as @p at @s positioned ~ ~-1 ~ run say command
// also with if
as(@p), at(@s), positioned('~ ~1 ~'), if(entity @s[tag=mytag]){
/say command
}
==> /execute as @p at @s positioned ~ ~-1 ~ if entity @s[tag=mytag] run say command
4.2 Functions
[run] function "name|path" {
/commands
}
run optionala path should be given as stringa name consisting of only characters, can be given without ""
A function generates a new mcfunction with the given name or path. You can also execute the function directly with the run keyword.This is an alternative to a more complicated varient with #file:.
e.g:
run function test {
/say function
}
/say not function
=
/function prj:test
/say not function
#file: ./test
/say function
4.3 Variables
Like every other programming language there are variables. They are initialized as follows:var testThe variable can take in a value:
var test = 5
# or
var test
test = 6
This value can be changed as often as you like.
var test
test @s = 10
Values can be assigned also only to special Minecraft selector like so.Also possible with playernames and placeholders:
test player = 10
Every value is saved in an independent scoreboard with it´s name or selector. So they are accessible with normal methods:
var test
test @s = 10
/scoreboard players get @s test ==> 10
/scoreboard players set @s test 5
# etc
Variables can be merged together:
var test = 10
var new = 5
# For the sake of simplicity, I start again and again with these values. The program makes it naturally different!
test += 2 ==> 12
test -= 2 ==> 8
Bit shorter:
test++ ==> test += 1
test-- ==> test -= 1
test += new ==> 15
test -= new ==> 5
test *= new ==> 50
test /= new ==> 2
test %= new ==> 0
** Save command response to variable: **
var res = run: command
==> execute store result score res res run command
The result of the command is written to the variable res.Example with /data get:' var varResult = run: data get entity @s Pos[0] '
4.4 Boolean Variables (Tags)
bool [name] [selector](optional) = true|false
Boolean values can be declared like this.bool isCool = true => tag [global] add isCoolThe variable can be changed later:isCool = false => tag [global] remove isCool
With If testable:
if(isCool){
/commands => execute if entity [global][tag=isCool] run commands
}
4.5 Constants
Another type of variable is the constant, declared as following:const test = [value]This type cannot be changed!
You can use it with $ (var_name) somewhere in your code to avoid long strings and repetitive phrases:
const aString = "Here can be a string"
const aNum = 5
/say $(aString) ==> /say Here can be a string
var test = $(aNum) ==> var test = 5
Replace constantsThe value of an constant can still be changed when used. To do this, add '.repl()' to the constant:
$(const).repl([search],[replacement])
In our example, we want to replace a:
/say $(aString).repl(" a "," the ") ==> /say Here can be the string
Also a RegEx can be inserted here and can be also accessed with '$&' in the replacement:$(aString).repl([/regex/],["$&"])
Maps
Maps are essentially key-value pairs kind of like a dictionary. We define it with the Map-operator:
const testMap = Map{
}
In the brackets you can define as many pairs as you like:
const testMap = Map{
"key1":"value",
"key2":"value2"
}
It then can be accessed with
/say $(testMap).key1
⇒ /say value
Arrays
Arrays are pretty similar to Maps, but use a list of values instead of pairs:
const testArr = Array{
"value", // index 0
"value2" // index 1
}
The values can be accessed by the index of the item starting with 0.
/say $(testArr).0
⇒ /say value
/say $(testArr).1
⇒ /say value2
4.6 If/Else Statements
If functions are similar to grouping:
if('statement'){
/commands => /execute if statement run command
}
With some additional features:
In front of every argument a "!" can be inserted to reverse the meaning:
if(!'statement'){ /commands => /execute unless statement run command }After the end an "else" can be attached:
if('statement'){
/commands => /execute if statement run command
} else { /execute unless statement run command2
/commands2
}
Important: Do not change the argument!
if('entity @s[tag=test]'){
/tag @s remove test
} else {
/tag @s remove test
}
They are both executed!! Improved:
if('entity @s[tag=test]'){
/tag @s add testIf
}
if('entity @s[tag=testIf]'){
/tag @s remove test
} else {
/tag @s remove test
}
- even "else if" is possible:
if('statement'){
/commands => /execute if statement run command
} else if('statement2') { /execute unless statement if statement2 run command2
/commands2
}
4.7 Logical operators
In combination with grouping and if-else statements logical operators can be used:
- The or operator can be used in two ways:
as('@s'||'@p'){
/command
}
==> execute as @s run command
execute at @p run command
# or as list
if('entity @s[tag=entity1]','entity @s[tag=entity2]'){
/command
}
==> execute if entity @s[tag=entity1] run command
execute if entity @s[tag=entity2] @p run command
- The and operator is defined like so (makes only really sense with if)
if('entity @s'&&'entity @p'){
/command
}
==> execute if entity @s if entity @p run command
- check variables:
var test = 5
# equally
if(test == 5){
/commands
}
# greater/smaller or equal
if(test >= 5){
/commands
}
# greater/smaller
if(test > 5){
/commands
}
# also avalible as comparison
if(test > test2){
/commands
}
# or with variables with entitys
if(test @s > test2 @a){
/commands
}
4.8 Switch-Cases
switch([var_name]){
case <=|<|==|>|>= [other_var]|[number] {
[actions]
},
default(optional) {
[default actions]
}
}
Switches makes the case distinction much easier. It´s able to test easily and clearly certain variables.e.g:
var test = 10
switch(test){
case > 10 {
/say var is over 10
},
case < 10 {
/say var is under 10
},
default {
/say no match
}
}
Here test is checked for more than 10, if that does not apply to less than 10 and finally outputed as default.Also abbreviable:
var test = 10
switch(test){
case > 10 run: say var is over 10
, case < 10 run: say var is under 10
, default run: say no match
}
4.9 For-Loops
One of the most helpful features is the for loop. It takes in neutral numbers.
From first Argument to second Argument is optional outputed as third Argument
for(1,5){
/commands
# is outputed 5 times
}
for(1,5){
/say $(i)
# say with 1 - 5 is outputed 5 times
}
with $(var_name) the loop variable can be accessed
var_name is out of the box defined as "i", but can be changed with the third argument:
for(1,5,X){
/say $(X)
# say with 1 - 5 is outputed 5 times}
That makes especially with two-dimensional loops sence:
for(1,5,i){
for(1,2,j){
/say $(i).$(j)
}
# say with 1.1 - 5,2 is outputed 10 times
}
4.10 Raycasting
raycast([distance](optional), [block to travel through](optional),entity | block [target](optional) ){
[actions on hitted block or entity]
},{
[actions for every flight step]
}
default distance = 100 Blocks
default block = air
default target = any block
Raycasting is a big thing in Minecraft 1.13 and provides unlimeted opportunities. But it is a bit difficult, so why not making it easier? With Minecraft Script this is really really easy now:
raycast {
/setblock ~ ~ ~ stone
}
This alone sets everywhere where you look a stoneParticles and block limits are also pretty easy:
raycast(10) {
/setblock ~ ~ ~ stone
}, {
/particle flame ~ ~ ~
}
Now there are beautiful effects and a max range of 10 blocks.The second argument sets the porous blocks.
raycast(10,"air") {
/setblock ~ ~ ~ stone
}
So the ray only goes through air.You can also negate the porous blocks and set with a "!" the not porous blocks:
raycast(10,!"white_wool") {
/setblock ~ ~ ~ stone
}
The ray goes through all blocks, but white wool.
As third optional argument a target can be set:
raycast(10,"air",block "white_wool") {
/setblock ~ ~ ~ stone
}
Now Mcscript knows that the target is a block and executes the command only if the block is white wool.
raycast(10,"air",entity @e[type=armor_stand]) {
/say test
}
Now Mcscript knows that the target is an entity and executes as the entity if it´s hitted.So the armor stand would say test.
4.11 while loops
The while loop is defined like so:
while([cond]){
/commands
}
The grouped commands are executed as long as the condition [cond] is true.
If the condition to start is not true, the grouping will not be executed!
As a condition, all operators and arguments of the If conditions can be used. e.g.
var test = 0
while(test < 10){
/commands here
test += 1
}
# ==> The commands are executed 10x in one tick
For while-loops you can also use stop and continue:
var test = 0
while(test < 10){
test += 1
if(test == 5){
continue
# If test is equal to 5 the other commands are skipped
}
/commands hier
if(test >= 9){
stop
# If test is equal to or over 5 the loop is stopped
}
}
4.12 do-while-Loops
do {
/commands
} while([cond])
The do-while loop works in a similar way to the while loop, with the small difference that the code block is executed and then the condition is checked.So the loop is executed at least one time.
4.13 forEach-Loop
forEach(var [var_name] = [start value]; [var_name] ==|>|<|<=|>=|!= [other_var]|[number]; [varname]++){
/commands
}
The forEach Loop is a loop found in almost any programming language.It is similar to Minecraft Script's for-loop, but it works dynamically (it does not run on generate, but in Minecraft)
e.g:
forEach(var i = 0; i < 10; i++){
/say hey
}
The Command is executed 10 times and the current value is saved each in the scoreboard i.Der Command wird also 10mal ausgeführt und der aktuelle Wert jeweils in dem scoreboard i gespeichert.You can also access the value like so. e.g. Faculty:
var result = 1
forEach(var i = 2; i <= 10; i++){
result *= i
}
==> result = 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10
4.14 Modals
Modals are like functions or methods. That means you can define them:
modal [name]([arguments]){ [actions] }
A modal is always introduced with the keyword followed by the name and the arguments in the brackets.
The arguments are accessible inside with $(argument_name).
modal newModal(argument){
/say $(argument)
}
newModal('test')
# => say test
If you use the modal like that, the values are used and it outputs everything.
modal createCommand(command,argument1,argument2){
/$(command) $(argument1) $(argument2)
}
createCommand('say', 'hallo', 'du')
# => say hallo du
You are also able to use multiple arguments.
There are optional and predefined arguments, too:
modal say(argument = "hallo"){
/say $(argument)
}
say()
# => say hallo
say('test')
# => say test
Using Maps and ArraysYou can also use the Map and Array type of constants in modals:
modal defaultMap(args = Map{"key":"value"}){
/say $(args).key
}
defaultMap()
defaultMap(Map{
"key":"value2"
})
⇒ /say value
⇒ /say value2
Override ModalsModals that have already been created can be overridden within the process:
override modal [name]([arguments]){ [actions] }
Arguments and actions are exchanged completely and used for the ongoing process.
Replace argumentsThe value of an argument can still be changed when used. To do this, add '.repl()' to the argument:
$(argument).repl([search],[replacement])
In our example, we want to replace an entered test:
/say $(argument).repl("test","no test") ==> /say no test
Also a RegEx can be inserted here and can be also accessed with '$&' in the replacement:$(argument).repl([/regex/],["$&"])
4.15 JavaScript Modals
JavaScript Modals are modals, you can write in JavaScript. You can define them like other modals:
modaljs [name]([arguments]){ [actions] return [Text] }
The JavaScript Modal must end with the return statement. The returned value will end up in the .mcfunction file as plain text.
modaljs newModal(){
return "say hi";
}
newModal()
# => say hi
For multi line output I recommend doing something like this:
modaljs newModal(){
var ret = "";
ret += "say hi\n";
ret += "say ho\n";
return ret;
}
newModal()
# => say hi
# => say ho
Note: You need to add line breaks manually with \n.
A JavaScript modal is always introduced with the keyword followed by the name and the arguments in the brackets.
The arguments are accessible inside with their names.
modaljs newModal(argument){
return "say " + argument;
}
newModal('test')
# => say test
You are also able to use multiple arguments.
modaljs newModal(text,monster){
var ret = "";
ret += "say " + text + "\n";
ret += "summon " + monster + "\n";
return ret;
}
newModal("Brains!!!","minecraft:zombie")
# => say Brains!!!
# => summon minecraft:zombie
There are optional and predefined arguments, too:
modaljs say(argument = "hallo"){
return "say " + argument ;
}
say()
# => say hallo
say('test')
# => say test
Tips and tricks
Use console.log() to output some information to the console while compiling without effecting the return value.
4.16 System Modals
There are already some helpful predefined modals. Please read the specific documentation here.
You have ideas which modals should be a standart? Send me your configuration file to check.
4.17 Error handling and Debugging
Minecraft Script shows since the version 0.2 only limeted errors with line and file displayed.Please use the flag -fullErr at generation to get the old full errors back, if you want so.
If you find errors that make no sense in the context, please notify the team.
Debug keywordYou can debug your code with the keyword "Debug" and find some errors in Minecraft Script much easier. You can place these anywhere in your code and they have no affect on the compiled output.
debug message: [message]Sends a simple message with line and file references.debug success: [message]- Sends a successful message in green with line and file references.
debug break: [message]Your program breakes at this point and sends the message obove .debug error: [message]Your program breakes at this point and sends a critical error with system information and relevant code positions.
IDEs and Syntax Highlighting
Visual Studio Code:Stevertus.mcscript
Now there´s nothing left than: Happy Developing
Thanks to all who use Minecraft Script and read this documentation. Contact me if you have a proposal, problem or error.