当我试图通过浏览器访问localhost时,我遇到了这个错误。
403禁止
我用的是LTS Ubuntu 14.04
以下是我的配置文件:
etc/apache2.conf
# This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.4/ for detailed information about # the directives and /usr/share/doc/apache2/README.Debian about Debian specific # hints. # # # Summary of how the Apache 2 configuration works in Debian: # The Apache 2 web server configuration in Debian is quite different to # upstream's suggested way to configure the web server. This is because Debian'sA # default Apache2 installation attempts to make adding and removing modules, # virtual hosts, and extra configuration directives as flexible as possible, in # order to make automating the changes and administering the server as easy as # possible. # It is split into several files forming the configuration hierarchy outlined # below, all located in the /etc/apache2/ directory: # # /etc/apache2/ # |-- apache2.conf # | `-- ports.conf # |-- mods-enabled # | |-- *.load # | `-- *.conf # |-- conf-enabled # | `-- *.conf # `-- sites-enabled # `-- *.conf # # # * apache2.conf is the main configuration file (this file). It puts the pieces # together by including all remaining configuration files when starting up the # web server. # # * ports.conf is always included from the main configuration file. It is # supposed to determine listening ports for incoming connections which can be # customized anytime. # # * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/ # directories contain particular configuration snippets which manage modules, # global configuration fragments, or virtual host configurations, # respectively. # # They are activated by symlinking available configuration files from their # respective *-available/ counterparts. These should be managed by using our # helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See # their respective man pages for detailed information. # # * The binary is called apache2. Due to the use of environment variables, in # the default configuration, apache2 needs to be started/stopped with # /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not # work with the default configuration. # Global configuration # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the Mutex documentation (available # at ); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # #ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # Mutex file:${APACHE_LOCK_DIR} default # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 5 # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a # container, that host's errors will be logged there and not here. # ErrorLog ${APACHE_LOG_DIR}/error.log # # LogLevel: Control the severity of messages logged to the error_log. # Available values: trace8, ..., trace1, debug, info, notice, warn, # error, crit, alert, emerg. # It is also possible to configure the log level for particular modules, e.g. # "LogLevel info ssl:warn" # LogLevel warn # Include module configuration: IncludeOptional mods-enabled/*.load IncludeOptional mods-enabled/*.conf # Include list of ports to listen on Include ports.conf # Sets the default security model of the Apache2 HTTPD server. It does # not allow access to the root filesystem outside of /usr/share and /var/www. # The former is used by web applications packaged in Debian, # the latter may be used for local directories served by the web server. If # your system is serving content from a sub-directory in /srv you must allow # access here, or in any related virtual host. Options Indexes FollowSymLinks AllowOverride None Require all granted AllowOverride None Require all granted Options Indexes FollowSymLinks AllowOverride None Require all granted # # Options Indexes FollowSymLinks # AllowOverride None # Require all granted # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # Require all granted # # The following directives define some format nicknames for use with # a CustomLog directive. # # These deviate from the Common Log Format definitions in that they use %O # (the actual bytes sent including headers) instead of %b (the size of the # requested file), because the latter makes it impossible to detect partial # requests. # # Note that the use of %{X-Forwarded-For}i instead of %h is not recommended. # Use mod_remoteip instead. # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements IncludeOptional conf-enabled/*.conf # Include the virtual host configurations: IncludeOptional sites-enabled/*.conf # vim: syntax=apache ts=4 sw=4 sts=4 sr noet
apache日志
>[Wed Jun 17 18:18:38.560856 2015] [authz_core:error] [pid 8872] [client 192.168.1.XX:XXXXX] AH01630: client denied by server configuration: /var/www/html/prestashop
我在论坛上遵循的配置出错了
etc/apache2/启用站点/prestashop.conf
# The ServerName directive sets the request scheme, hostname and port that # the server uses to identify itself. This is used when creating # redirection URLs. In the context of virtual hosts, the ServerName # specifies what hostname must appear in the request's Host: header to # match this virtual host. For the default virtual host (this file) this # value is not decisive as it is used as a last resort host regardless. # However, you must set it for any further virtual host explicitly. #ServerName www.example.com ServerAdmin webmaster@localhost DocumentRoot /var/www/html/prestashop # Available loglevels: trace8, ..., trace1, debug, info, notice, warn, # error, crit, alert, emerg. # It is also possible to configure the loglevel for particular # modules, e.g. #LogLevel info ssl:warn ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined Options All AllowOverride All Require all granted # For most configuration files from conf-available/, which are # enabled or disabled at a global level, it is possible to # include a line for only one particular virtual host. For example the # following line enables the CGI configuration for this host only # after it has been globally disabled with "a2disconf". #Include conf-available/serve-cgi-bin.conf # vim: syntax=apache ts=4 sw=4 sts=4 sr noet
我已经添加到apache,我更新了服务,总是同样的错误,我想知道为什么它不工作,也许我想chmod这个网站可以在本地任何媒体类型,请你的帮助,晚上好
仅仅看配置,我就看到了几件事。
您的vhost配置名为
etc/apache2/sites-enabled/prestashop.config
但这不是apache.conf文件中包含的文件类型。
# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf
您的apache设置查找< code >。conf文件不是< code >。config,所以它很可能甚至没有读取你的vhost文件。
此外,我会将vhost设置为如下所示,并包含Directory
指令。
<VirtualHost *:80>
ServerName localhost
ServerAdmin webmaster@localhost
DocumentRoot /var/www/html/prestashop
<Directory /var/www/html/prestashop>
DirectoryIndex index.php index.html
Options All
AllowOverride All
Require all granted
</Directory>
# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the loglevel for particular
# modules, e.g.
#LogLevel info ssl:warn
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>
并在进行所有更改后重新启动apache。
当我试图通过浏览器访问localhost时会出现这个错误。 我使用以下方法检查了网站文件夹权限: 下面是我的配置文件: null
当我从Apache2的错误日志中按照教程的Postfix admin部分中的指南并试图导航到网站< code > https://mail admin . example . com/setup . PHP (也只是用example.com替换了我的网站名称)时,我得到了这个有名无实的错误消息,因为我得到了一个403禁止。 以下是我在< code > sudo nano/etc/Apache 2/
我使用Apache HTTPDmod_wsgi运行一个烧瓶应用程序。该应用程序运行良好,但每次访问页面时,error_log都会出现错误。(我正在尝试优化应用程序)。 错误为:AH01630:客户端被服务器配置拒绝:/apps/apache/httpd_alass/htdocs/ HTTPD.conf 包含 即使在WSGI正确提供此应用程序之后,为什么会在error_log中写入错误以及如何修复它
我正在得到 [2012年4月24日星期二 12:12:55][错误][客户端 127.0.0.1] 客户端被服务器配置拒绝:/labs/Projects/Nebula/bin/ 我的目录结构如下(我使用的是Symfony 2,其他web框架的结构应该类似) 我有这样的vhosts设置: 我想知道出了什么问题,我该如何解决它?
我不知道为什么 apache 会抛出此错误,可以访问文档根目录中的所有文件,但是当我尝试访问名为 dhtxxxx.xxx 的文件时,我收到禁止错误,如果我将文件名更改为“htmlxgrid_dhx_terrace.css”它工作正常。 文档根目录具有,所以这不是问题: 以下是我在日志中看到的内容: [authz_core:error][pid XXXX:tid XXXXXXX][客户端xx.xx.
我正在CentOs上使用Apache 2.4为我的网站供电。然而,当我试图通过浏览器访问网站时,总是会出现403禁止的错误。当我查阅