In the following examples, input and output are distinguished by the presence or absence of prompts (">>> " and "... "): to repeat the example, you must type everything after the prompt, when the prompt appears; lines that do not begin with a prompt are output from the interpreter. Note that a secondary prompt on a line by itself in an example means you must type a blank line; this is used to end a multi-line command.

在后面的例子中，区分输入和输出的方法是看是否有提示符（"»> " 和"... "）：想要重现这些例子的话，你就要在提示符显示后输入所有的一切；没有以提示符开始的行，是解释器输出的信息。需要注意的是示例中的从属提示符用于多行命令的结束，它表示你需要输入一个空行。

Many of the examples in this manual, even those entered at the interactive prompt, include comments. Comments in Python start with the hash character, "#", and extend to the end of the physical line. A comment may appear at the start of a line or following whitespace or code, but not within a string literal. A hash character within a string literal is just a hash character.

本手册中的很多示例都包括注释，甚至有一些在交互提示符中折行。Python中的注释以符号 "#" 起始，一直到当前行的结尾。注释可能出现在一行的开始，也可能跟在空格或程序代码之后，但不会出现在字符串中，字符串中的 "#" 号只代表 "#" 号。

Some examples:

示例：

# this is the first comment
SPAM = 1                 # and this is the second comment
                         # ... and now a third!
STRING = "# This is not a comment."

3.1 将Python当作计算器使用 Using Python as a Calculator

Let's try some simple Python commands. Start the interpreter and wait for the primary prompt, ">>> ". (It shouldn't take long.)

让我们试验一些简单的 Python 命令。启动解释器然后等待主提示符">>> "出现（这用不了太久）。

3.1.1 数值 Numbers

The interpreter acts as a simple calculator: you can type an expression at it and it will write the value. Expression syntax is straightforward: the operators +, -, * and / work just like in most other languages (for example, Pascal or C); parentheses can be used for grouping. For example:

解释器的行为就像是一个计算器。你可以向它输入一个表达式，它会返回结果。表达式的语法简明易懂：+，-，*，/和大多数语言中的用法一样（比如C或Pascal），括号用于分组。例如：

>>> 2+2
4
>>> # This is a comment
... 2+2
4
>>> 2+2  # and a comment on the same line as code
4
>>> (50-5*6)/4
5
>>> # Integer division returns the floor:
... 7/3
2
>>> 7/-3
-3

Like in C, the equal sign ("=") is used to assign a value to a variable. The value of an assignment is not written:

像c一样，等号（"="）用于给变量赋值。被分配的值是只读的。

>>> width = 20
>>> height = 5*9
>>> width * height
900

A value can be assigned to several variables simultaneously:

同一个值可以同时赋给几个变量：

>>> x = y = z = 0  # Zero x, y and z
>>> x
0
>>> y
0
>>> z
0

There is full support for floating point; operators with mixed type operands convert the integer operand to floating point:

Python完全支持浮点数，不同类型的操作数混在一起时，操作符会把整型转化为浮点数。

>>> 3 * 3.75 / 1.5
7.5
>>> 7.0 / 2
3.5

Complex numbers are also supported; imaginary numbers are written with a suffix of "j" or "J". Complex numbers with a nonzero real component are written as "(real+imagj)", or can be created with the "complex(real, imag)" function.

Python 也同样支持复数，虚部由一个后缀"j"或者"J"来表示。带有非零实部的复数记为"real+imagj)"，或者也可以通过"complex(real, img)"函数创建。

>>> 1j * 1J
(-1+0j)
>>> 1j * complex(0,1)
(-1+0j)
>>> 3+1j*3
(3+3j)
>>> (3+1j)*3
(9+3j)
>>> (1+2j)/(1+1j)
(1.5+0.5j)

Complex numbers are always represented as two floating point numbers, the real and imaginary part. To extract these parts from a complex number z, use z.real and z.imag.

复数总是由实部和虚部两部分浮点数来表示。可以从 z.real 和 z.imag 得到复数z的实部和虚部。

>>> a=1.5+0.5j
>>> a.real
1.5
>>> a.imag
0.5

The conversion functions to floating point and integer (float(), int() and long()) don't work for complex numbers -- there is no one correct way to convert a complex number to a real number. Use abs(z) to get its magnitude (as a float) or z.real to get its real part.

用于向浮点数和整型转化的函数（float(), int() 和 long()）不能对复数起作用－－没有什么方法可以将复数转化为实数。可以使用abs(z)取得它的模，也可以通过z.real得到它的实部。

>>> a=3.0+4.0j
>>> float(a)
Traceback (most recent call last):
  File "<stdin>", line 1, in ?
TypeError: can't convert complex to float; use abs(z)
>>> a.real
3.0
>>> a.imag
4.0
>>> abs(a)  # sqrt(a.real**2 + a.imag**2)
5.0
>>>

In interactive mode, the last printed expression is assigned to the variable _. This means that when you are using Python as a desk calculator, it is somewhat easier to continue calculations, for example:

交互模式下，最近一次表达式输出保存在 _ 变量中。这意味着把 Python 当做桌面计算器使用时，可以方便的进行连续计算，例如：

>>> tax = 12.5 / 100
>>> price = 100.50
>>> price * tax
12.5625
>>> price + _
113.0625
>>> round(_, 2)
113.06
>>>

This variable should be treated as read-only by the user. Don't explicitly assign a value to it -- you would create an independent local variable with the same name masking the built-in variable with its magic behavior.

这个变量对于用户来说是只读的。不要试图去给它赋值－－限于 Python 的语法规则，你只会创建一个同名的局部变量覆盖它。

3.1.2 字符串 Strings

Besides numbers, Python can also manipulate strings, which can be expressed in several ways. They can be enclosed in single quotes or double quotes:

除了数值， Python 还可以通过几种不同的方法操作字符串。字符串用单引号或双引号标识：

>>> 'spam eggs'
'spam eggs'
>>> 'doesn\'t'
"doesn't"
>>> "doesn't"
"doesn't"
>>> '"Yes," he said.'
'"Yes," he said.'
>>> "\"Yes,\" he said."
'"Yes," he said.'
>>> '"Isn\'t," she said.'
'"Isn\'t," she said.'

String literals can span multiple lines in several ways. Continuation lines can be used, with a backslash as the last character on the line indicating that the next line is a logical continuation of the line:

字符串可以通过几种方式分行。可以在行加反斜杠做为继续符，这表示下一行是当前行的逻辑沿续。

hello = "This is a rather long string containing\n\
several lines of text just as you would do in C.\n\
    Note that whitespace at the beginning of the line is\
 significant."

print hello

Note that newlines would still need to be embedded in the string using \n; the newline following the trailing backslash is discarded. This example would print the following:

注意换行用 \n 来表示；反斜杠后面的新行标识（newline，缩写“n”）会转换为换行符，示例会按如下格式打印：

This is a rather long string containing
several lines of text just as you would do in C.
    Note that whitespace at the beginning of the line is significant.

If we make the string literal a ``raw'' string, however, the \n sequences are not converted to newlines, but the backslash at the end of the line, and the newline character in the source, are both included in the string as data. Thus, the example:

然而，如果我们创建一个“行”("raw")字符串，\ n序列就不会转为换行，源码中的反斜杠和换行符n都会做为字符串中的数据处理。如下所示：

hello = r"This is a rather long string containing\n\
several lines of text much as you would do in C."

print hello

would print:

会打印为：

This is a rather long string containing\n\
several lines of text much as you would do in C.

Or, strings can be surrounded in a pair of matching triple-quotes: """ or '''. End of lines do not need to be escaped when using triple-quotes, but they will be included in the string.

另外，字符串可以用一对三重引号”””或'''来标识。三重引号中的字符串在行尾不需要换行标记，所有的格式都会包括在字符串中。

print """
Usage: thingy [OPTIONS]
     -h                        Display this usage message
     -H hostname               Hostname to connect to
"""

produces the following output:

生成以下输出：

Usage: thingy [OPTIONS]
     -h                        Display this usage message
     -H hostname               Hostname to connect to

The interpreter prints the result of string operations in the same way as they are typed for input: inside quotes, and with quotes and other funny characters escaped by backslashes, to show the precise value. The string is enclosed in double quotes if the string contains a single quote and no double quotes, else it's enclosed in single quotes. (The print statement, described later, can be used to write strings without quotes or escapes.)

解释器打印出来的字符串与它们输入的形式完全相同：内部的引号，用反斜杠标识的引号和各种怪字符，都精确的显示出来。如果字符串中包含单引号，不包含双引号，可以用双引号引用它，反之可以用单引号。（后面介绍的 print 语句，可以在不使用引号和反斜杠的情况下输出字符串）。

Strings can be concatenated (glued together) with the + operator, and repeated with *:

字符串可以用 + 号联接（或者说粘合），也可以用 * 号循环。

>>> word = 'Help' + 'A'
>>> word
'HelpA'
>>> '<' + word*5 + '>'
'<HelpAHelpAHelpAHelpAHelpA>'

Two string literals next to each other are automatically concatenated; the first line above could also have been written "word = 'Help' 'A'"; this only works with two literals, not with arbitrary string expressions:

两个字符串值之间会自动联接，上例第一行可以写成“word = 'Help' 'A'”。这种方式只对字符串值有效，任何字符串表达式都不适用这种方法。

>>> 'str' 'ing'                   #  <-  This is ok
'string'
>>> 'str'.strip() + 'ing'   #  <-  This is ok
'string'
>>> 'str'.strip() 'ing'     #  <-  This is invalid
  File "<stdin>", line 1, in ?
    'str'.strip() 'ing'
                      ^
SyntaxError: invalid syntax

Strings can be subscripted (indexed); like in C, the first character of a string has subscript (index) 0. There is no separate character type; a character is simply a string of size one. Like in Icon, substrings can be specified with the slice notation: two indices separated by a colon.

字符串可以用下标（索引）查询；就像 C 一样，字符串的第一个字符下标是 0。这里没有独立的字符类型，字符仅仅是大小为一的字符串。就像在 Icon 中那样，字符串的子串可以通过切片标志来表示：两个由冒号隔开的索引。

>>> word[4]
'A'
>>> word[0:2]
'He'
>>> word[2:4]
'lp'

Slice indices have useful defaults; an omitted first index defaults to zero, an omitted second index defaults to the size of the string being sliced.

切片索引可以使用默认值；前一个索引默认值为 0，后一个索引默认值为被切片的字符串的长度。

>>> word[:2]    # The first two characters
'He'
>>> word[2:]    # Everything except the first two characters
'lpA'

Unlike a C string, Python strings cannot be changed. Assigning to an indexed position in the string results in an error:

和 C 字符串不同， Python 字符串不能改写。按字符串索引赋值会产生错误。

>>> word[0] = 'x'
Traceback (most recent call last):
  File "<stdin>", line 1, in ?
TypeError: object doesn't support item assignment
>>> word[:1] = 'Splat'
Traceback (most recent call last):
  File "<stdin>", line 1, in ?
TypeError: object doesn't support slice assignment

However, creating a new string with the combined content is easy and efficient:

然而，可以通过简单有效的组合方式生成新的字符串：

>>> 'x' + word[1:]
'xelpA'
>>> 'Splat' + word[4]
'SplatA'

Here's a useful invariant of slice operations: s[:i] + s[i:] equals s.

切片操作有一个很有用的不变性：

>>> word[:2] + word[2:]
'HelpA'
>>> word[:3] + word[3:]
'HelpA'

Degenerate slice indices are handled gracefully: an index that is too large is replaced by the string size, an upper bound smaller than the lower bound returns an empty string.

退化的切片索引处理方式很优美：过大的索引代替为字符串大小，下界比上界大的返回空字符串。

>>> word[1:100]
'elpA'
>>> word[10:]
''
>>> word[2:1]
''

Indices may be negative numbers, to start counting from the right. For example:

索引可以是负数，计数从右边开始，例如：

>>> word[-1]     # The last character
'A'
>>> word[-2]     # The last-but-one character
'p'
>>> word[-2:]    # The last two characters
'pA'
>>> word[:-2]    # Everything except the last two characters
'Hel'

But note that -0 is really the same as 0, so it does not count from the right!

不过需要注意的是-0还是0，它没有从右边计数！

>>> word[-0]     # (since -0 equals 0)
'H'

Out-of-range negative slice indices are truncated, but don't try this for single-element (non-slice) indices:

越界的负切片索引会被截断，不过不要尝试在单元素索引（非切片的）中这样做：

>>> word[-100:]
'HelpA'
>>> word[-10]    # error
Traceback (most recent call last):
  File "<stdin>", line 1, in ?
IndexError: string index out of range

The best way to remember how slices work is to think of the indices as pointing between characters, with the left edge of the first character numbered 0. Then the right edge of the last character of a string of n characters has index n, for example:

理解切片的最好方式是把索引视为两个字符之间的点，第一个字符的左边是0，字符串中第n个字符的右边是索引n，例如：

 +---+---+---+---+---+
 | H | e | l | p | A |
 +---+---+---+---+---+
 0   1   2   3   4   5
-5  -4  -3  -2  -1

The first row of numbers gives the position of the indices 0...5 in the string; the second row gives the corresponding negative indices. The slice from i to j consists of all characters between the edges labeled i and j, respectively.

第一行是字符串中给定的0到5各个索引的位置，第二行是对应的负索引。从i到j的切片由这两个标志之间的字符组成。

For non-negative indices, the length of a slice is the difference of the indices, if both are within bounds. For example, the length of word[1:3] is 2.

对于非负索引，切片长度就是两索引的差。例如，word[1:3]的长度是2。

The built-in function len() returns the length of a string:

内置函数 len() 返回字符串长度：

>>> s = 'supercalifragilisticexpialidocious'
>>> len(s)
34

See Also:

Sequence Types

Strings, and the Unicode strings described in the next section, are examples of sequence types, and support the common operations supported by such types.

String Methods

Both strings and Unicode strings support a large number of methods for basic transformations and searching.

String Formatting Operations

The formatting operations invoked when strings and Unicode strings are the left operand of the % operator are described in more detail here.

3.1.3 Unicode 字符串 Unicode Strings

Starting with Python 2.0 a new data type for storing text data is available to the programmer: the Unicode object. It can be used to store and manipulate Unicode data (see http://www.unicode.org/) and integrates well with the existing string objects providing auto-conversions where necessary.

从Python2.0开始，程序员们可以使用一种新的数据类型来存储文本数据：Unicode 对象。它可以用于存储多种Unicode数据（请参阅 http://www.unicode.org/ ），并且，通过必要时的自动转换，它可以与现有的字符串对象良好的结合。

Unicode has the advantage of providing one ordinal for every character in every script used in modern and ancient texts. Previously, there were only 256 possible ordinals for script characters and texts were typically bound to a code page which mapped the ordinals to script characters. This lead to very much confusion especially with respect to internationalization (usually written as "i18n" -- "i" + 18 characters + "n") of software. Unicode solves these problems by defining one code page for all scripts.

Unicode 针对现代和旧式的文本中所有的字符提供了一个序列。以前，字符只能使用256个序号，文本通常通过绑定代码页来与字符映射。这很容易导致混乱，特别是软件的国际化（ internationalization －－通常写做“i18n”－－“i”+ "i" +“n”）。 Unicode 通过为所有字符定义一个统一的代码页解决了这个问题。

Creating Unicode strings in Python is just as simple as creating normal strings:

Python 中定义一个 Unicode 字符串和定义一个普通字符串一样简单：

>>> u'Hello World !'
u'Hello World !'

The small "u" in front of the quote indicates that an Unicode string is supposed to be created. If you want to include special characters in the string, you can do so by using the Python Unicode-Escape encoding. The following example shows how:

引号前小写的“u”表示这里创建的是一个 Unicode 字符串。如果你想加入一个特殊字符，可以使用 Python 的 Unicode-Escape 编码。如下例所示：

>>> u'Hello\u0020World !'
u'Hello World !'

The escape sequence \u0020 indicates to insert the Unicode character with the ordinal value 0x0020 (the space character) at the given position.

被替换的 \u0020 标识表示在给定位置插入编码值为 0x0020 的 Unicode 字符（空格符）。

Other characters are interpreted by using their respective ordinal values directly as Unicode ordinals. If you have literal strings in the standard Latin-1 encoding that is used in many Western countries, you will find it convenient that the lower 256 characters of Unicode are the same as the 256 characters of Latin-1.

其它字符也会被直接解释成对应的 Unicode 码。如果你有一个在西方国家常用的 Latin-1 编码字符串，你可以发现 Unicode 字符集的前256个字符与 Latin-1 的对应字符编码完全相同。

For experts, there is also a raw mode just like the one for normal strings. You have to prefix the opening quote with 'ur' to have Python use the Raw-Unicode-Escape encoding. It will only apply the above \uXXXX conversion if there is an uneven number of backslashes in front of the small 'u'.

另外，有一种与普通字符串相同的行模式。要使用 Python 的 Raw-Unicode-Escape 编码，你需要在字符串的引号前加上 ur 前缀。如果在小写“u”前有不止一个反斜杠，它只会把那些单独的
uXXXX 转化为Unicode字符。

>>> ur'Hello\u0020World !'
u'Hello World !'
>>> ur'Hello\\u0020World !'
u'Hello\\\\u0020World !'

The raw mode is most useful when you have to enter lots of backslashes, as can be necessary in regular expressions.

行模式在你需要输入很多个反斜杠时很有用，使用正则表达式时会带来方便。

Apart from these standard encodings, Python provides a whole set of other ways of creating Unicode strings on the basis of a known encoding.

作为这些编码标准的一部分， Python 提供了一个完备的方法集用于从已知的编码集创建 Unicode 字符串。

The built-in function unicode() provides access to all registered Unicode codecs (COders and DECoders). Some of the more well known encodings which these codecs can convert are Latin-1, ASCII, UTF-8, and UTF-16. The latter two are variable-length encodings that store each Unicode character in one or more bytes. The default encoding is normally set to ASCII, which passes through characters in the range 0 to 127 and rejects any other characters with an error. When a Unicode string is printed, written to a file, or converted with str(), conversion takes place using this default encoding.

内置函数 unicode() 提供了访问（编码和解码）所有已注册的 Unicode 编码的方法。它能转换众所周知的 Latin-1, ASCII, UTF-8, 和 UTF-16。后面的两个可变长编码字符集用一个或多个 byte 存储 Unicode 字符。默认的字符集是 ASCII，它只处理0到127的编码，拒绝其它的字符并返回一个错误。当一个 Unicode 字符串被打印、写入文件或通过 str() 转化时，它们被替换为默认的编码。

>>> u"abc"
u'abc'
>>> str(u"abc")
'abc'
>>> u"漩?
u'\xe4\xf6\xfc'
>>> str(u"漩?)
Traceback (most recent call last):
  File "<stdin>", line 1, in ?
UnicodeEncodeError: 'ascii' codec can't encode characters in position 0-2: ordinal not in range(128)

To convert a Unicode string into an 8-bit string using a specific encoding, Unicode objects provide an encode() method that takes one argument, the name of the encoding. Lowercase names for encodings are preferred.

要把一个 Unicode 字符串用指定的字符集转化成8位字符串，可以使用 Unicode 对象提供的 encode() 方法，它有一个参数用以指定编码名称。编码名称小写。

>>> u"漩?.encode('utf-8')
'\xc3\xa4\xc3\xb6\xc3\xbc'

If you have data in a specific encoding and want to produce a corresponding Unicode string from it, you can use the unicode() function with the encoding name as the second argument.

如果你有一个特定编码的字符串，想要把它转为 Unicode 字符集，，可以使用 encode() 函数，它以编码名做为第二个参数。

>>> unicode('\xc3\xa4\xc3\xb6\xc3\xbc', 'utf-8')
u'\xe4\xf6\xfc'

3.1.4 链表 Lists

Python knows a number of compound data types, used to group together other values. The most versatile is the list, which can be written as a list of comma-separated values (items) between square brackets. List items need not all have the same type.

Python 已经有了几个复合数据类型，用于组织其它的值。最通用的是链表，它写为中括之间用逗号分隔的一列值（子项），链表的子项不一定是同一类型的值。

>>> a = ['spam', 'eggs', 100, 1234]
>>> a
['spam', 'eggs', 100, 1234]

Like string indices, list indices start at 0, and lists can be sliced, concatenated and so on:

像字符串一样，链表也以零开始，可以被切片，联接，等等：

>>> a[0]
'spam'
>>> a[3]
1234
>>> a[-2]
100
>>> a[1:-1]
['eggs', 100]
>>> a[:2] + ['bacon', 2*2]
['spam', 'eggs', 'bacon', 4]
>>> 3*a[:3] + ['Boe!']
['spam', 'eggs', 100, 'spam', 'eggs', 100, 'spam', 'eggs', 100, 'Boe!']

Unlike strings, which are immutable, it is possible to change individual elements of a list:

与不变的字符串不同，链表可以改变每个独立元素的值：

>>> a
['spam', 'eggs', 100, 1234]
>>> a[2] = a[2] + 23
>>> a
['spam', 'eggs', 123, 1234]

Assignment to slices is also possible, and this can even change the size of the list:

可以进行切片操作，甚至还可以改变链表的大小：

>>> # Replace some items:
... a[0:2] = [1, 12]
>>> a
[1, 12, 123, 1234]
>>> # Remove some:
... a[0:2] = []
>>> a
[123, 1234]
>>> # Insert some:
... a[1:1] = ['bletch', 'xyzzy']
>>> a
[123, 'bletch', 'xyzzy', 1234]
>>> a[:0] = a     # Insert (a copy of) itself at the beginning
>>> a
[123, 'bletch', 'xyzzy', 1234, 123, 'bletch', 'xyzzy', 1234]

The built-in function len() also applies to lists:

内置函数len()也同样可以用于链表：

>>> len(a)
8

It is possible to nest lists (create lists containing other lists), for example:

它也可以嵌套链表（在链表中创建其它链表），例如：

>>> q = [2, 3]
>>> p = [1, q, 4]
>>> len(p)
3
>>> p[1]
[2, 3]
>>> p[1][0]
2
>>> p[1].append('xtra')     # See section 5.1
>>> p
[1, [2, 3, 'xtra'], 4]
>>> q
[2, 3, 'xtra']

Note that in the last example, p[1] and q really refer to the same object! We'll come back to object semantics later.

注意最后一个例子， p[1] 和 q 实际上指向同一个对象！我们在后面会讲到对象语法。

3.2 开始编程 First Steps Towards Programming

Of course, we can use Python for more complicated tasks than adding two and two together. For instance, we can write an initial sub-sequence of the Fibonacci series as follows:

当然，我们可以用 Python 做比2加2更复杂的事。例如，我们可以用以下的方法输出菲波那契（Fibonacci）序列的子序列：

>>> # Fibonacci series:
... # the sum of two elements defines the next
... a, b = 0, 1
>>> while b < 10:
...       print b
...       a, b = b, a+b
...
1
1
2
3
5
8

This example introduces several new features.

示例中介绍了一些新功能：

• The first line contains a multiple assignment: the variables a and b simultaneously get the new values 0 and 1. On the last line this is used again, demonstrating that the expressions on the right-hand side are all evaluated first before any of the assignments take place. The right-hand side expressions are evaluated from the left to the right.

  第一行包括了 复合参数：变量 a 和 b 同时被赋值为 0 和 1 。最后一行又一次使用了这种技术，证明了在赋值之前表达式右边先进行了运算。右边的表达式从左到右运算。

• The while loop executes as long as the condition (here: b < 10) remains true. In Python, like in C, any non-zero integer value is true; zero is false. The condition may also be a string or list value, in fact any sequence; anything with a non-zero length is true, empty sequences are false. The test used in the example is a simple comparison. The standard comparison operators are written the same as in C: < (less than), > (greater than), == (equal to), <= (less than or equal to), >= (greater than or equal to) and != (not equal to).

  while 循环运行在条件为真时执行（这里是 b < 10 ）。在 Python 中，类似于 C 任何非零值为真，零为假。这个条件也可以用于字符串或链表，事实上于对任何序列类型，长度非零时为真，空序列为假。示例所用的是一个简单的比较。标准的比较运算符写法和 C 相同： < （小于），> （大于），== （等于），<= （小于等于），>=（大于等于）和 != （不等于）。

• The body of the loop is indented: indentation is Python's way of grouping statements. Python does not (yet!) provide an intelligent input line editing facility, so you have to type a tab or space(s) for each indented line. In practice you will prepare more complicated input for Python with a text editor; most text editors have an auto-indent facility. When a compound statement is entered interactively, it must be followed by a blank line to indicate completion (since the parser cannot guess when you have typed the last line). Note that each line within a basic block must be indented by the same amount.

  循环体是缩进的：缩进是 Python 对语句分组的方法。 Python 还没有提供一个智能编辑功能，你要在每一个缩进行输入一个 tab 或（一个或多个）空格。实际上你可能会准备更为复杂的文本编辑器来编写你的 Python 程序，大多数文本编辑器都提供了自动缩进功能。交互式的输入一个复杂语句时，需要用一个空行表示完成（因为解释器没办法猜出你什么时候输入最后一行）。需要注意的是每一行都要有相同的缩进来标识这是同一个语句块。

• The print statement writes the value of the expression(s) it is given. It differs from just writing the expression you want to write (as we did earlier in the calculator examples) in the way it handles multiple expressions and strings. Strings are printed without quotes, and a space is inserted between items, so you can format things nicely, like this:

  print 语句打印给定表达式的值。它与你仅仅输入你需要的表达式（就像前面的计算器示例）不同，它可以同时输出多个表达式。字符串输出时没有引号，各项之间用一个空格分开，你可以很容易区分它们，如下所示：

  >>> i = 256*256
  >>> print 'The value of i is', i
  The value of i is 65536
  

  A trailing comma avoids the newline after the output:

  print 语句末尾的逗号避免了输出中的换行：

  >>> a, b = 0, 1
  >>> while b < 1000:
  ...     print b,
  ...     a, b = b, a+b
  ...
  1 1 2 3 5 8 13 21 34 55 89 144 233 377 610 987
  

  Note that the interpreter inserts a newline before it prints the next prompt if the last line was not completed.

  需要注意的是，如果最后一行仍没有写完，解释器会在它打印下一个命令时插入一个新行。