php的turn服务器,搭建TurnServer服务器

一：下载turnserver服务器

[root@iZ28d8mzdwrZ src]#wget http://ncu.dl.sourceforge.net/project/turnserver/turnserver-0.7.3.tar.bz2

[root@iZ28d8mzdwrZ src]#tar -xvf turnserver-0.7.3.tar.bz2

#下载并安装libconfuse依赖:

[root@iZ28d8mzdwrZ src]#wget

[root@iZ28d8mzdwrZ src]#tar -zxvf confuse-2.7.tar.gz

[root@iZ28d8mzdwrZ src]#cd confuse-2.7

[root@iZ28d8mzdwrZ confuse-2.7]#./configure --prefix=/usr

[root@iZ28d8mzdwrZ confuse-2.7]#maek && make install

[root@iZ28d8mzdwrZ confuse-2.7]#yuminstall flex  #安装flex依赖

[root@iZ28d8mzdwrZ confuse-2.7]#cd ../turnserver-0.7.3

[root@iZ28d8mzdwrZ turnserver-0.7.3]#./configure --enable-debug-build

[root@iZ28d8mzdwrZ turnserver-0.7.3]#make && make install

二：配置

[root@iZ28d8mzdwrZ turnserver-0.7.3]# cd extra/

[root@iZ28d8mzdwrZ extra]# ls

Makefile     Makefile.in             turnserver.conf.template  turnserver.fedora.initd  turnusers.txt.template

Makefile.am  packet-stun2-turn.diff  turnserver.debian.initd   turnserver.spec

[root@iZ28d8mzdwrZ extra]# cp turnserver.conf.template /usr/local/etc/turnserver.conf

[root@iZ28d8mzdwrZ extra]# cp turnusers.txt.template /usr/local/etc/turnusers.txt

1.1.1.10      修改配置文件：

[root@rlnf-76etc]# vi turnserver.conf

listen_address = {"183.62.225.76" }           #把公网IP地址写入，一般只要改这个配置，其它的用默认值就可以了。

## Account method.

account_method = "file"                        #配置账户数据为文件

## Account file (if account_method = file).

account_file ="/usr/local/etc/turnusers.txt" #指定账户文件位置

[root@rlnf-76etc]# vi turnusers.txt

foo:bar:domain.org:authorized

用户名：密码：领域：需要验证的

1.1.1.11      启动turnserver：

[root@rlnf-76etc]# cd ../sbin

[root@rlnf-76sbin]# ./turnserver -c /usr/local/etc/turnserver.conf

1.1.1.12      启动回显服务：

[root@rlnf-76bin]# ./test_echo_server

UDP Echo server started on port 4588

1.1.1.13      测试服务器是否正常

在其它机器上启动测试程序：

rdc@rdc-Virtual-Machine:/home/turnserver/src$./test_turn_client -t udp -s 183.62.225.76 -p 183.62.225.76 -w 4588 -u foo -g 1234-d domain.org

Protocol: udp (17) use TLS: 0.

sock: 3 speer: (nil) connected!

Send Allocate request.

Send Allocate request.

Probably wrong credentials or requestedfamily not supported.

这个是说权限错误，一般是用户或密码不对。修改用户和密码，再次运行：

rdc@rdc-Virtual-Machine:/home/turnserver/src$./test_turn_client -t udp -s 183.62.225.76 -p 183.62.225.76 -w 4588 -u foo -gbar -d domain.org

Protocol: udp (17) use TLS: 0.

sock: 3 speer: (nil) connected!

Send Allocate request.

Send Allocate request.

Allocate an address!

Send CreatePermission request.

Permission installed!

Send Send indication.

Receive data: 1024

Send CreatePermission request.

Channel bound to 16393.

Send ChannelData.

Received ChannelData: 1024 bytes

Send Refresh request.

Cleanup and exit.

1.1.1.14      服务端打印的日志：

15:44:26.632297 [turnserver_main:4509]  Received UDP on listening address

15:44:26.632336[turnserver_listen_recv:3273]   Nomessage integrity

15:44:26.636506 [turnserver_main:4509]  Received UDP on listening address

15:44:26.636534[turnserver_listen_recv:3581]   OK basicvalidation are done, process the TURN message

15:44:26.636546 [turnserver_process_turn:2942]  Process a TURN message

15:44:26.636559[turnserver_process_allocate_request:2302]     Allocate request received!

15:44:26.636573[turnserver_process_allocate_request:2536]     lifetime: 165 seconds

15:44:26.636667 [turnserver_process_allocate_request:2767]      Account foo, allocations used: 3

15:44:26.636719[turnserver_process_allocate_request:2903]     Allocation successful, send success allocate response

15:44:26.640733 [turnserver_main:4509]  Received UDP on listening address

15:44:26.640758[turnserver_listen_recv:3581]   OK basicvalidation are done, process the TURN message

15:44:26.640770[turnserver_process_turn:2942]  Process aTURN message

15:44:26.640781[turnserver_process_createpermission_request:1627]      CreatePermission request received

15:44:26.640807[turnserver_process_createpermission_request:1767]      Install permission for 183.62.225.76 4588

15:44:26.640828[turnserver_process_createpermission_request:1806]      CreatePermission successful, send successCreatePermission response

15:44:26.645088 [turnserver_main:4509]  Received UDP on listening address

15:44:26.645110[turnserver_listen_recv:3581]   OK basicvalidation are done, process the TURN message

15:44:26.645121[turnserver_process_turn:2942]  Process aTURN message

15:44:26.645131[turnserver_process_send_indication:1414]      Send indication received!

15:44:26.645143[turnserver_check_bandwidth_limit:503] Tokendown bucket available: 150000, tokens requested: 1024

15:44:26.645154[turnserver_process_send_indication:1536]      Will not set DF flag

15:44:26.645166[turnserver_process_send_indication:1567]      Send data to peer

15:44:26.645224 [turnserver_main:4686]  Received UDP on a relayed address

15:44:26.645241[turnserver_check_bandwidth_limit:477] Tokenup bucket available: 150000, tokens requested: 1024

15:44:26.645314[turnserver_relayed_recv:3722]  Send datato client

15:44:26.649140 [turnserver_main:4509]  Received UDP on listening address

15:44:26.649165[turnserver_listen_recv:3581]   OK basicvalidation are done, process the TURN message

15:44:26.649177[turnserver_process_turn:2942]  Process aTURN message

15:44:26.649187[turnserver_process_channelbind_request:1860]  ChannelBind request received!

15:44:26.649199[turnserver_process_channelbind_request:1936]  Client request a ChannelBinding for 183.62.225.76 4588

15:44:26.649234[turnserver_process_channelbind_request:2055]  ChannelBind successful, send success ChannelBind response

15:44:26.653515 [turnserver_main:4509]  Received UDP on listening address

15:44:26.653532[turnserver_process_channeldata:1239]  ChannelData received!

15:44:26.653544[turnserver_check_bandwidth_limit:503] Tokendown bucket available: 150000, tokens requested: 1024

15:44:26.653557[turnserver_process_channeldata:1366]  Send ChannelData to peer

15:44:26.653596 [turnserver_main:4686]  Received UDP on a relayed address

15:44:26.653611[turnserver_check_bandwidth_limit:477] Tokenup bucket available: 150000, tokens requested: 1024

15:44:26.653623[turnserver_relayed_recv:3722]  Send datato client

15:44:26.657563 [turnserver_main:4509]  Received UDP on listening address

15:44:26.657586[turnserver_listen_recv:3581]   OK basicvalidation are done, process the TURN message

15:44:26.657598[turnserver_process_turn:2942]  Process aTURN message

15:44:26.657608[turnserver_process_refresh_request:2101]      Refresh request received!

15:44:26.657618[turnserver_process_refresh_request:2146]      lifetime: 0 seconds

15:44:26.657664[turnserver_process_refresh_request:2201]      Account foo, allocations used: 2

15:44:26.657677[turnserver_process_refresh_request:2203]      Explicit delete of allocation

15:44:26.657692[turnserver_process_refresh_request:2245]      Refresh successful, send success refresh response