CentOS 5安装ISPConfig 3主机控制面板详细教程
万俟招
ISPConfig 3是Linux的一个开源主机控制面板。ISPConfig 3能够通过一个控制面板管理多台服务器。
服务与功能 单个控制面板管理一台或更多的服务器（多服务器管理）不同的权限极别（管理员，代理商，客户）+roudcube插件为ISPConfig提供的电子邮件用户极别 Httpd(虚拟主机，基于域名和IP) FTP，SFTP，SCP DNS（A, CNAME, MX, SRV和TXT记录 ） POP3，IMAP Email-Autoresponder 服务器邮件过滤高级的email spamfilter和antivirus filter邮件过滤软件 MySQL client-databases Webalizer statistics 硬盘配额邮件配额流量限制和统计多IP支持 SSL SSI PHP (可用的PHP模块: mod_php, FCGI,CGI和SuPHP) Shell-access Jailed shell access 防火墙服务器监控模块 phpmyadmin MySQL数据库客户端
现在我们开始安装ISPConfig 3。
在安装之前，我们需要禁用Iptables和SELinux
system-config-securitylevel
如果提示命令不存在，则表示没有安装system-config-securitylevel，执行yum install system-config-securitylevel命令安装即可。
安装一些软件 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY* yum update yum groupinstall 'Development Tools' yum groupinstall 'Development Libraries' 安装Quota yum install quota
编辑/etc/fstab，添加,usrquota,grpquota 到/ partition(/dev/VolGroup00/LogVo100)后面，添加后如下：
/dev/VolGroup00/LogVol00 / ext3 defaults,usrquota,grpquota 1 1 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/VolGroup00/LogVol01 swap swap defaults 0 0
然后运行如下命令启用quota：
touch /aquota.user /aquota.group chmod 600 /aquota.* mount -o remount / quotacheck -avugm quotaon -avug
注意：这种设置可能不适合VPS。
安装Apache, MySQL, phpMyAdmin rpm --import http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt cd /tmp wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el5.rf.i386.rpm rpm -Uvh rpmforge-release-0.5.2-2.el5.rf.i386.rpm yum install ntp httpd mysql-server php php-mysql php-mbstring php-mcrypt phpmyadmin rpm-build gcc mysql-devel openssl-devel cyrus-sasl-devel pkgconfig zlib-devel pcre-devel openldap-devel postgresql-devel expect libtool-ltdl-devel openldap-servers libtool gdbm-devel pam-devel gamin-devel 安装Courier-IMAP, Courier-Authlib和Maildrop useradd -m -s /bin/bash compileuser passwd compileuser visudo
按如下编辑
[...] root ALL=(ALL) ALL compileuser ALL=(ALL) ALL [...] su compileuser mkdir $HOME/rpm mkdir $HOME/rpm/SOURCES mkdir $HOME/rpm/SPECS mkdir $HOME/rpm/BUILD mkdir $HOME/rpm/SRPMS mkdir $HOME/rpm/RPMS mkdir $HOME/rpm/RPMS/i386 echo "%_topdir $HOME/rpm" >> $HOME/.rpmmacros cd /tmp wget http://nchc.dl.sourceforge.net/project/courier/authlib/0.63.0/courier-authlib-0.63.0.tar.bz2 wget http://nchc.dl.sourceforge.net/project/courier/imap/4.9.3/courier-imap-4.9.3.tar.bz2 wget http://nchc.dl.sourceforge.net/project/courier/maildrop/2.5.4/maildrop-2.5.4.tar.bz2 sudo rpmbuild -ta courier-authlib-0.63.0.tar.bz2 cd $HOME/rpm/RPMS/i386 sudo rpm -ivh courier-authlib-0.63.0-1.i386.rpm courier-authlib-mysql-0.63.0-1.i386.rpm courier-authlib-devel-0.63.0-1.i386.rpm cd /tmp rpmbuild -ta courier-imap-4.9.3.tar.bz2 cd $HOME/rpm/RPMS/i386 sudo rpm -ivh courier-imap-4.9.3-1.i386.rpm cd /tmp sudo rpmbuild -ta maildrop-2.5.4.tar.bz2 cd $HOME/rpm/RPMS/i386 sudo rpm -ivh maildrop-2.5.4-1.i386.rpm exit 安装Postfix yum install postfix chkconfig --levels 235 courier-authlib on /etc/init.d/courier-authlib start chkconfig --levels 235 sendmail off chkconfig --levels 235 postfix on chkconfig --levels 235 saslauthd on /etc/init.d/sendmail stop /etc/init.d/postfix start /etc/init.d/saslauthd restart 配置Courier chkconfig --levels 235 courier-imap on /etc/init.d/courier-authlib restart /etc/init.d/courier-imap restart cd /usr/lib/courier-imap/share/ rm -f imapd.pem rm -f pop3d.pem vi /usr/lib/courier-imap/etc/imapd.cnf
最后编辑结果如下：
[...] CN=server1.example.com [...] vi /usr/lib/courier-imap/etc/pop3d.cnf
最后编辑结果如下：
[...] CN=server1.example.com [...] ./mkimapdcert ./mkpop3dcert /etc/init.d/courier-authlib restart /etc/init.d/courier-imap restart 安装getmail yum install getmail 设置MySQL密码和配置phpMyAdmin chkconfig --levels 235 mysqld on /etc/init.d/mysqld start mysqladmin -u root password yourrootsqlpassword mysqladmin -h server1.example.com -u root password yourrootsqlpassword vi /etc/httpd/conf.d/phpmyadmin.conf
修改结果如下：
# # Web application to manage MySQL # #<Directory "/usr/share/phpmyadmin"> # Order Deny,Allow # Deny from all # Allow from 127.0.0.1 #</Directory> Alias /phpmyadmin /usr/share/phpmyadmin Alias /phpMyAdmin /usr/share/phpmyadmin Alias /mysqladmin /usr/share/phpmyadmin vi /usr/share/phpmyadmin/config.inc.php
修改结果如下：
[...] /* Authentication type */ $cfg['Servers'][$i]['auth_type'] = 'http'; [...] chkconfig --levels 235 httpd on /etc/init.d/httpd start 安装Amavisd-new, SpamAssassin和ClamAV yum install amavisd-new spamassassin clamav clamd unzip bzip2 unrar perl-DBD-mysql chkconfig --levels 235 amavisd on chkconfig --levels 235 clamd on /usr/bin/freshclam /etc/init.d/amavisd start /etc/init.d/clamd start mkdir /var/run/amavisd /var/spool/amavisd /var/spool/amavisd/tmp /var/spool/amavisd/db chown amavis /var/run/amavisd /var/spool/amavisd /var/spool/amavisd/tmp /var/spool/amavisd/db 安装Apache的组件mod_php, mod_fcgi/PHP5和suPHP cd /etc/yum.repos.d/ wget http://centos.karan.org/kbsingh-CentOS-Extras.repo vi /etc/yum.repos.d/kbsingh-CentOS-Extras.repo
把enabled=0改为enabled=1。如下：
[...] [kbs-CentOS-Testing] name=CentOS.Karan.Org-EL$releasever - Testing gpgcheck=0 gpgkey=http://centos.karan.org/RPM-GPG-KEY-karan.org.txt enabled=1 baseurl=http://centos.karan.org/el$releasever/extras/testing/$basearch/RPMS/ yum install php php-devel php-gd php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc php-eaccelerator php-mbstring php-mcrypt php-mhash php-mssql php-snmp php-soap php-tidy curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel mod_fcgid php-cli httpd-devel vi /etc/php.ini
编辑结果如下：
[...] ;error_reporting = E_ALL error_reporting = E_ALL & ~E_NOTICE [...] cgi.fix_pathinfo = 1 cd /tmp wget http://www.suphp.org/download/suphp-0.7.1.tar.gz tar xvfz suphp-0.7.1.tar.gz cd suphp-0.7.1/ ./configure --prefix=/usr --sysconfdir=/etc --with-apr=/usr/bin/apr-1-config --with-apxs=/usr/sbin/apxs --with-apache-user=apache --with-setid-mode=owner --with-php=/usr/bin/php-cgi --with-logfile=/var/log/httpd/suphp_log --enable-SUPHP_USE_USERGROUP=yes make && make install vi /etc/httpd/conf.d/suphp.conf
加入如下行：
LoadModule suphp_module modules/mod_suphp.so vi /etc/suphp.conf
加入如下代码：
[global] ;Path to logfile logfile=/var/log/httpd/suphp.log ;Loglevel loglevel=info ;User Apache is running as webserver_user=apache ;Path all scripts have to be in docroot=/ ;Path to chroot() to before executing script ;chroot=/mychroot ; Security options allow_file_group_writeable=true allow_file_others_writeable=false allow_directory_group_writeable=true allow_directory_others_writeable=false ;Check wheter script is within DOCUMENT_ROOT check_vhost_docroot=true ;Send minor error messages to browser errors_to_browser=false ;PATH environment variable env_path=/bin:/usr/bin ;Umask to set, specify in octal notation umask=0077 ; Minimum UID min_uid=100 ; Minimum GID min_gid=100 [handlers] ;Handler for php-scripts x-httpd-suphp="php:/usr/bin/php-cgi" ;Handler for CGI-scripts x-suphp-cgi="execute:!self" /etc/init.d/httpd restart 编译安装Pure-FTPd cd /tmp wget http://download.pureftpd.org/pub/pure-ftpd/releases/pure-ftpd-1.0.32.tar.gz tar zxvf pure-ftpd-1.0.32.tar.gz cd pure-ftpd-1.0.32/ ./configure --prefix=/opt/pureftpd --with-mysql= --with-paranoidmsg --with-shadow --with-welcomemsg --with-uploadscript --with-quotas --with-cookie --with-virtualhosts --with-diraliases --with-sysquotas --with-ratios --with-ftpwho --with-throttling --with-altlog --with-language=simplified-chinese make && make install mkdir /etc/pure-ftpd cp pureftpd-mysql.conf /etc/pure-ftpd cp configuration-file/pure-ftpd.conf /etc/pure-ftpd cp configuration-file/pure-config.pl /etc vi /etc/init.d/pure-ftpd
加入如下代码：
#!/bin/bash PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin export PATH # Check if user is root if [ $(id -u) != "0" ]; then printf "Error: You must be root to run this script!\n" exit 1 fi prog="Pure-FTPd" PUREPIDFILE="/var/run/pure-ftpd.pid" PURECONFIGPL="/etc/pure-config.pl" PURECONFIGFILE="/etc/pure-ftpd/pure-ftpd.conf" start() { printf "Starting $prog... \n" $PURECONFIGPL $PURECONFIGFILE --daemonize } stop() { printf "Stopping $prog... \n" kill `cat $PUREPIDFILE` } status() { if [ -e $PUREPIDFILE ]; then printf "$prog is running.\n" else printf "$prog is NOT running.\n" fi } case "$1" in start) start ;; stop) stop ;; restart) stop start ;; status) status ;; *) printf "Usage: /root/pureftpd {start|stop|restart|status}\n" esac exit chmod 755 /etc/pure-config.pl ln -s /opt/pureftpd/sbin/pure-ftpd /usr/sbin/ chmod 755 /etc/init.d/pure-ftpd chkconfig --levels 235 pure-ftpd on /etc/init.d/pure-ftpd start 安装MyDNS cd /tmp wget http://mydns.bboy.net/download/mydns-mysql-1.1.0-1.i386.rpm rpm -ivh mydns-mysql-1.1.0-1.i386.rpm vi /etc/init.d/mydns
编辑如下：
[...] #chkconfig: 345 65 50 [...] chkconfig --levels 235 mydns on 安装Vlogger And Webalizer yum install webalizer perl-DateTime-Format-HTTP perl-DateTime-Format-Builder wget http://n0rp.chemlab.org/vlogger/vlogger-1.3.tar.gz tar xvfz vlogger-1.3.tar.gz mv vlogger-1.3/vlogger /usr/sbin/ rm -rf vlogger* 安装Jailkit cd /tmp wget http://olivier.sessink.nl/jailkit/jailkit-2.14.tar.gz tar xvfz jailkit-2.14.tar.gz cd jailkit-2.14 ./configure make && make install 安装fail2ban yum install fail2ban chkconfig --levels 235 fail2ban on /etc/init.d/fail2ban start 安装rkhunter yum install rkhunter 安装SquirrelMail yum install squirrelmail /etc/init.d/httpd restart /usr/share/squirrelmail/config/conf.pl
按如下提示操作：
Main Menu –
1. Organization Preferences
2. Server Settings
3. Folder Defaults
4. General Options
5. Themes
6. Address Books
7. Message of the Day (MOTD)
8. Plugins
9. Database
10. Languages
D. Set pre-defined settings for specific IMAP servers
C Turn color off
S Save data
Q Quit
Command >> <-- D
SquirrelMail Configuration : Read: config.php
———————————————————
While we have been building SquirrelMail, we have discovered some
preferences that work better with some servers that don’t work so
well with others. If you select your IMAP server, this option will
set some pre-defined settings for that server.
Please note that you will still need to go through and make sure
everything is correct. This does not change everything. There are
only a few settings that this will change.
Please select your IMAP server:
bincimap = Binc IMAP server
courier = Courier IMAP server
cyrus = Cyrus IMAP server
dovecot = Dovecot Secure IMAP server
exchange = Microsoft Exchange IMAP server
hmailserver = hMailServer
macosx = Mac OS X Mailserver
mercury32 = Mercury/32
uw = University of Washington’s IMAP server
quit = Do not change anything
Command >> <-- courier
imap_server_type = courier
default_folder_prefix = INBOX.
trash_folder = Trash
sent_folder = Sent
draft_folder = Drafts
show_prefix_option = false
default_sub_of_inbox = false
show_contain_subfolders_option = false
optional_delimiter = .
delete_folder = true
Press any key to continue… <-- press a key
SquirrelMail Configuration : Read: config.php (1.4.0)
———————————————————
Main Menu –
1. Organization Preferences
2. Server Settings
3. Folder Defaults
4. General Options
5. Themes
6. Address Books
7. Message of the Day (MOTD)
8. Plugins
9. Database
10. Languages
D. Set pre-defined settings for specific IMAP servers
C Turn color off
S Save data
Q Quit
Command >> <--S
SquirrelMail Configuration : Read: config.php (1.4.0)
———————————————————
Main Menu –
1. Organization Preferences
2. Server Settings
3. Folder Defaults
4. General Options
5. Themes
6. Address Books
7. Message of the Day (MOTD)
8. Plugins
9. Database
10. Languages
D. Set pre-defined settings for specific IMAP servers
C Turn color off
S Save data
Q Quit
Command >> <--Q
vi /etc/squirrelmail/config_local.php
注释最后一行，如下：
<?php /** * Local config overrides. * * You can override the config.php settings here. * Don't do it unless you know what you're doing. * Use standard PHP syntax, see config.php for examples. * * @copyright © 2002-2006 The SquirrelMail Project Team * @license http://opensource.org/licenses/gpl-license.php GNU Public License * @version $Id: config_local.php,v 1.2 2006/07/11 03:33:47 wtogami Exp $ * @package squirrelmail * @subpackage config */ //$default_folder_prefix = ''; ?> 安装ISPConfig 3 cd /tmp wget http://downloads.sourceforge.net/project/ispconfig/ISPConfig%203/ISPConfig-3.0.3.3/ISPConfig-3.0.3.3.tar.gz?r=&ts=1309567938&use_mirror=nchc tar xvfz ISPConfig-3.0.3.3.tar.gz cd ispconfig3_install/install/ php -q install.php
按如下提示操作：
——————————————————————————–
_____ ___________ _____ __ _
|_ _/ ___| ___ / __ / _(_)
| | `–.| |_/ / | / / ___ _ __ | |_ _ __ _
| | `–. __/ | | / _ | ‘_ | _| |/ _` |
_| |_/__/ / | | __/ (_) | | | | | | | (_| |
___/____/_| ____/___/|_| |_|_| |_|__, |
__/ |
|___/
——————————————————————————–
>> Initial configuration
Operating System: CentOS 5.2 or compatible
Following will be a few questions for primary configuration so be careful.
Default values are in [brackets] and can be accepted with .
Tap in “quit” (without the quotes) to stop the installer.
Select language (en,de) [en]:
Installation mode (standard,expert) [standard]: <-- ENTER
Full qualified hostname (FQDN) of the server, eg server1.domain.tld [server1.example.com]: <-- ENTER
MySQL server hostname [localhost]: <-- ENTER
MySQL root username [root]: <-- ENTER
MySQL root password []: <-- yourrootsqlpassword
MySQL database to create [dbispconfig]: <-- ENTER
MySQL charset [utf8]: <-- ENTER
Generating a 2048 bit RSA private key
…………………………………………+++
………………………………………………………………………+++
writing new private key to ‘smtpd.key’
—–
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter ‘.’, the field will be left blank.
—–
Country Name (2 letter coolcode) [GB]: <-- ENTER
State or Province Name (full name) [Berkshire]: <-- ENTER
Locality Name (eg, city) [Newbury]: <-- ENTER
Organization Name (eg, company) [My Company Ltd]: <-- ENTER
Organizational Unit Name (eg, section) []: <-- ENTER
Common Name (eg, your name or your server’s hostname) []: <-- ENTER
Email Address []: <-- ENTER
Configuring Jailkit
Configuring SASL
Configuring PAM
Configuring Courier
Configuring Spamassassin
Configuring Amavisd
Configuring Getmail
Configuring Pureftpd
Configuring MyDNS
Configuring Apache
Configuring Firewall
Installing ISPConfig
ISPConfig Port [8080]: <-- ENTER
Configuring DBServer
Installing Crontab
no crontab for root
no crontab for getmail
Restarting services …
Stopping MySQL: [ OK ]
Starting MySQL: [ OK ]
Shutting down postfix: [ OK ]
Starting postfix: [ OK ]
Stopping saslauthd: [ OK ]
Starting saslauthd: [ OK ]
Shutting down Mail Virus Scanner (amavisd): [ OK ]
Starting Mail Virus Scanner (amavisd): [ OK ]
Stopping Clam AntiVirus Daemon: [ OK ]
Starting Clam AntiVirus Daemon: [ OK ]
Stopping Courier authentication services: authdaemond
Starting Courier authentication services: authdaemond
Stopping Courier-IMAP server: imap imap-ssl pop3 pop3-ssl
Starting Courier-IMAP server: imap imap-ssl pop3 pop3-ssl
Stopping httpd: [ OK ]
Starting httpd: [ OK ]
Stopping pure-ftpd: [ OK ]
Starting pure-ftpd: [ OK ]
Installation completed.
之后，你就可以通过 http://server1.example.com:8080/ or http://192.168.0.100:8080/，用户名和密码都admin来登录后台了。
后台登录界面：
Administartor后台界面：
Reseller后台界面：
Client后台界面：
ISPConfig后台演示地址： http://www.ispconfig.org/ispconfig-3/online-demo/
官方网站： http://www.ispconfig.org/
参考文章： http://www.howtoforge.com/perfect-server-centos-5.2-ispconfig-3
服务与功能 单个控制面板管理一台或更多的服务器（多服务器管理）不同的权限极别（管理员，代理商，客户）+roudcube插件为ISPConfig提供的电子邮件用户极别 Httpd(虚拟主机，基于域名和IP) FTP，SFTP，SCP DNS（A, CNAME, MX, SRV和TXT记录 ） POP3，IMAP Email-Autoresponder 服务器邮件过滤高级的email spamfilter和antivirus filter邮件过滤软件 MySQL client-databases Webalizer statistics 硬盘配额邮件配额流量限制和统计多IP支持 SSL SSI PHP (可用的PHP模块: mod_php, FCGI,CGI和SuPHP) Shell-access Jailed shell access 防火墙服务器监控模块 phpmyadmin MySQL数据库客户端
现在我们开始安装ISPConfig 3。
在安装之前，我们需要禁用Iptables和SELinux
system-config-securitylevel
如果提示命令不存在，则表示没有安装system-config-securitylevel，执行yum install system-config-securitylevel命令安装即可。
安装一些软件 rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY* yum update yum groupinstall 'Development Tools' yum groupinstall 'Development Libraries' 安装Quota yum install quota
编辑/etc/fstab，添加,usrquota,grpquota 到/ partition(/dev/VolGroup00/LogVo100)后面，添加后如下：
/dev/VolGroup00/LogVol00 / ext3 defaults,usrquota,grpquota 1 1 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/VolGroup00/LogVol01 swap swap defaults 0 0
然后运行如下命令启用quota：
touch /aquota.user /aquota.group chmod 600 /aquota.* mount -o remount / quotacheck -avugm quotaon -avug
注意：这种设置可能不适合VPS。
安装Apache, MySQL, phpMyAdmin rpm --import http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt cd /tmp wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el5.rf.i386.rpm rpm -Uvh rpmforge-release-0.5.2-2.el5.rf.i386.rpm yum install ntp httpd mysql-server php php-mysql php-mbstring php-mcrypt phpmyadmin rpm-build gcc mysql-devel openssl-devel cyrus-sasl-devel pkgconfig zlib-devel pcre-devel openldap-devel postgresql-devel expect libtool-ltdl-devel openldap-servers libtool gdbm-devel pam-devel gamin-devel 安装Courier-IMAP, Courier-Authlib和Maildrop useradd -m -s /bin/bash compileuser passwd compileuser visudo
按如下编辑
[...] root ALL=(ALL) ALL compileuser ALL=(ALL) ALL [...] su compileuser mkdir $HOME/rpm mkdir $HOME/rpm/SOURCES mkdir $HOME/rpm/SPECS mkdir $HOME/rpm/BUILD mkdir $HOME/rpm/SRPMS mkdir $HOME/rpm/RPMS mkdir $HOME/rpm/RPMS/i386 echo "%_topdir $HOME/rpm" >> $HOME/.rpmmacros cd /tmp wget http://nchc.dl.sourceforge.net/project/courier/authlib/0.63.0/courier-authlib-0.63.0.tar.bz2 wget http://nchc.dl.sourceforge.net/project/courier/imap/4.9.3/courier-imap-4.9.3.tar.bz2 wget http://nchc.dl.sourceforge.net/project/courier/maildrop/2.5.4/maildrop-2.5.4.tar.bz2 sudo rpmbuild -ta courier-authlib-0.63.0.tar.bz2 cd $HOME/rpm/RPMS/i386 sudo rpm -ivh courier-authlib-0.63.0-1.i386.rpm courier-authlib-mysql-0.63.0-1.i386.rpm courier-authlib-devel-0.63.0-1.i386.rpm cd /tmp rpmbuild -ta courier-imap-4.9.3.tar.bz2 cd $HOME/rpm/RPMS/i386 sudo rpm -ivh courier-imap-4.9.3-1.i386.rpm cd /tmp sudo rpmbuild -ta maildrop-2.5.4.tar.bz2 cd $HOME/rpm/RPMS/i386 sudo rpm -ivh maildrop-2.5.4-1.i386.rpm exit 安装Postfix yum install postfix chkconfig --levels 235 courier-authlib on /etc/init.d/courier-authlib start chkconfig --levels 235 sendmail off chkconfig --levels 235 postfix on chkconfig --levels 235 saslauthd on /etc/init.d/sendmail stop /etc/init.d/postfix start /etc/init.d/saslauthd restart 配置Courier chkconfig --levels 235 courier-imap on /etc/init.d/courier-authlib restart /etc/init.d/courier-imap restart cd /usr/lib/courier-imap/share/ rm -f imapd.pem rm -f pop3d.pem vi /usr/lib/courier-imap/etc/imapd.cnf
最后编辑结果如下：
[...] CN=server1.example.com [...] vi /usr/lib/courier-imap/etc/pop3d.cnf
最后编辑结果如下：
[...] CN=server1.example.com [...] ./mkimapdcert ./mkpop3dcert /etc/init.d/courier-authlib restart /etc/init.d/courier-imap restart 安装getmail yum install getmail 设置MySQL密码和配置phpMyAdmin chkconfig --levels 235 mysqld on /etc/init.d/mysqld start mysqladmin -u root password yourrootsqlpassword mysqladmin -h server1.example.com -u root password yourrootsqlpassword vi /etc/httpd/conf.d/phpmyadmin.conf
修改结果如下：
# # Web application to manage MySQL # #<Directory "/usr/share/phpmyadmin"> # Order Deny,Allow # Deny from all # Allow from 127.0.0.1 #</Directory> Alias /phpmyadmin /usr/share/phpmyadmin Alias /phpMyAdmin /usr/share/phpmyadmin Alias /mysqladmin /usr/share/phpmyadmin vi /usr/share/phpmyadmin/config.inc.php
修改结果如下：
[...] /* Authentication type */ $cfg['Servers'][$i]['auth_type'] = 'http'; [...] chkconfig --levels 235 httpd on /etc/init.d/httpd start 安装Amavisd-new, SpamAssassin和ClamAV yum install amavisd-new spamassassin clamav clamd unzip bzip2 unrar perl-DBD-mysql chkconfig --levels 235 amavisd on chkconfig --levels 235 clamd on /usr/bin/freshclam /etc/init.d/amavisd start /etc/init.d/clamd start mkdir /var/run/amavisd /var/spool/amavisd /var/spool/amavisd/tmp /var/spool/amavisd/db chown amavis /var/run/amavisd /var/spool/amavisd /var/spool/amavisd/tmp /var/spool/amavisd/db 安装Apache的组件mod_php, mod_fcgi/PHP5和suPHP cd /etc/yum.repos.d/ wget http://centos.karan.org/kbsingh-CentOS-Extras.repo vi /etc/yum.repos.d/kbsingh-CentOS-Extras.repo
把enabled=0改为enabled=1。如下：
[...] [kbs-CentOS-Testing] name=CentOS.Karan.Org-EL$releasever - Testing gpgcheck=0 gpgkey=http://centos.karan.org/RPM-GPG-KEY-karan.org.txt enabled=1 baseurl=http://centos.karan.org/el$releasever/extras/testing/$basearch/RPMS/ yum install php php-devel php-gd php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc php-eaccelerator php-mbstring php-mcrypt php-mhash php-mssql php-snmp php-soap php-tidy curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel mod_fcgid php-cli httpd-devel vi /etc/php.ini
编辑结果如下：
[...] ;error_reporting = E_ALL error_reporting = E_ALL & ~E_NOTICE [...] cgi.fix_pathinfo = 1 cd /tmp wget http://www.suphp.org/download/suphp-0.7.1.tar.gz tar xvfz suphp-0.7.1.tar.gz cd suphp-0.7.1/ ./configure --prefix=/usr --sysconfdir=/etc --with-apr=/usr/bin/apr-1-config --with-apxs=/usr/sbin/apxs --with-apache-user=apache --with-setid-mode=owner --with-php=/usr/bin/php-cgi --with-logfile=/var/log/httpd/suphp_log --enable-SUPHP_USE_USERGROUP=yes make && make install vi /etc/httpd/conf.d/suphp.conf
加入如下行：
LoadModule suphp_module modules/mod_suphp.so vi /etc/suphp.conf
加入如下代码：
[global] ;Path to logfile logfile=/var/log/httpd/suphp.log ;Loglevel loglevel=info ;User Apache is running as webserver_user=apache ;Path all scripts have to be in docroot=/ ;Path to chroot() to before executing script ;chroot=/mychroot ; Security options allow_file_group_writeable=true allow_file_others_writeable=false allow_directory_group_writeable=true allow_directory_others_writeable=false ;Check wheter script is within DOCUMENT_ROOT check_vhost_docroot=true ;Send minor error messages to browser errors_to_browser=false ;PATH environment variable env_path=/bin:/usr/bin ;Umask to set, specify in octal notation umask=0077 ; Minimum UID min_uid=100 ; Minimum GID min_gid=100 [handlers] ;Handler for php-scripts x-httpd-suphp="php:/usr/bin/php-cgi" ;Handler for CGI-scripts x-suphp-cgi="execute:!self" /etc/init.d/httpd restart 编译安装Pure-FTPd cd /tmp wget http://download.pureftpd.org/pub/pure-ftpd/releases/pure-ftpd-1.0.32.tar.gz tar zxvf pure-ftpd-1.0.32.tar.gz cd pure-ftpd-1.0.32/ ./configure --prefix=/opt/pureftpd --with-mysql= --with-paranoidmsg --with-shadow --with-welcomemsg --with-uploadscript --with-quotas --with-cookie --with-virtualhosts --with-diraliases --with-sysquotas --with-ratios --with-ftpwho --with-throttling --with-altlog --with-language=simplified-chinese make && make install mkdir /etc/pure-ftpd cp pureftpd-mysql.conf /etc/pure-ftpd cp configuration-file/pure-ftpd.conf /etc/pure-ftpd cp configuration-file/pure-config.pl /etc vi /etc/init.d/pure-ftpd
加入如下代码：
#!/bin/bash PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin export PATH # Check if user is root if [ $(id -u) != "0" ]; then printf "Error: You must be root to run this script!\n" exit 1 fi prog="Pure-FTPd" PUREPIDFILE="/var/run/pure-ftpd.pid" PURECONFIGPL="/etc/pure-config.pl" PURECONFIGFILE="/etc/pure-ftpd/pure-ftpd.conf" start() { printf "Starting $prog... \n" $PURECONFIGPL $PURECONFIGFILE --daemonize } stop() { printf "Stopping $prog... \n" kill `cat $PUREPIDFILE` } status() { if [ -e $PUREPIDFILE ]; then printf "$prog is running.\n" else printf "$prog is NOT running.\n" fi } case "$1" in start) start ;; stop) stop ;; restart) stop start ;; status) status ;; *) printf "Usage: /root/pureftpd {start|stop|restart|status}\n" esac exit chmod 755 /etc/pure-config.pl ln -s /opt/pureftpd/sbin/pure-ftpd /usr/sbin/ chmod 755 /etc/init.d/pure-ftpd chkconfig --levels 235 pure-ftpd on /etc/init.d/pure-ftpd start 安装MyDNS cd /tmp wget http://mydns.bboy.net/download/mydns-mysql-1.1.0-1.i386.rpm rpm -ivh mydns-mysql-1.1.0-1.i386.rpm vi /etc/init.d/mydns
编辑如下：
[...] #chkconfig: 345 65 50 [...] chkconfig --levels 235 mydns on 安装Vlogger And Webalizer yum install webalizer perl-DateTime-Format-HTTP perl-DateTime-Format-Builder wget http://n0rp.chemlab.org/vlogger/vlogger-1.3.tar.gz tar xvfz vlogger-1.3.tar.gz mv vlogger-1.3/vlogger /usr/sbin/ rm -rf vlogger* 安装Jailkit cd /tmp wget http://olivier.sessink.nl/jailkit/jailkit-2.14.tar.gz tar xvfz jailkit-2.14.tar.gz cd jailkit-2.14 ./configure make && make install 安装fail2ban yum install fail2ban chkconfig --levels 235 fail2ban on /etc/init.d/fail2ban start 安装rkhunter yum install rkhunter 安装SquirrelMail yum install squirrelmail /etc/init.d/httpd restart /usr/share/squirrelmail/config/conf.pl
按如下提示操作：
Main Menu –
1. Organization Preferences
2. Server Settings
3. Folder Defaults
4. General Options
5. Themes
6. Address Books
7. Message of the Day (MOTD)
8. Plugins
9. Database
10. Languages
D. Set pre-defined settings for specific IMAP servers
C Turn color off
S Save data
Q Quit
Command >> <-- D
SquirrelMail Configuration : Read: config.php
———————————————————
While we have been building SquirrelMail, we have discovered some
preferences that work better with some servers that don’t work so
well with others. If you select your IMAP server, this option will
set some pre-defined settings for that server.
Please note that you will still need to go through and make sure
everything is correct. This does not change everything. There are
only a few settings that this will change.
Please select your IMAP server:
bincimap = Binc IMAP server
courier = Courier IMAP server
cyrus = Cyrus IMAP server
dovecot = Dovecot Secure IMAP server
exchange = Microsoft Exchange IMAP server
hmailserver = hMailServer
macosx = Mac OS X Mailserver
mercury32 = Mercury/32
uw = University of Washington’s IMAP server
quit = Do not change anything
Command >> <-- courier
imap_server_type = courier
default_folder_prefix = INBOX.
trash_folder = Trash
sent_folder = Sent
draft_folder = Drafts
show_prefix_option = false
default_sub_of_inbox = false
show_contain_subfolders_option = false
optional_delimiter = .
delete_folder = true
Press any key to continue… <-- press a key
SquirrelMail Configuration : Read: config.php (1.4.0)
———————————————————
Main Menu –
1. Organization Preferences
2. Server Settings
3. Folder Defaults
4. General Options
5. Themes
6. Address Books
7. Message of the Day (MOTD)
8. Plugins
9. Database
10. Languages
D. Set pre-defined settings for specific IMAP servers
C Turn color off
S Save data
Q Quit
Command >> <--S
SquirrelMail Configuration : Read: config.php (1.4.0)
———————————————————
Main Menu –
1. Organization Preferences
2. Server Settings
3. Folder Defaults
4. General Options
5. Themes
6. Address Books
7. Message of the Day (MOTD)
8. Plugins
9. Database
10. Languages
D. Set pre-defined settings for specific IMAP servers
C Turn color off
S Save data
Q Quit
Command >> <--Q
vi /etc/squirrelmail/config_local.php
注释最后一行，如下：
<?php /** * Local config overrides. * * You can override the config.php settings here. * Don't do it unless you know what you're doing. * Use standard PHP syntax, see config.php for examples. * * @copyright © 2002-2006 The SquirrelMail Project Team * @license http://opensource.org/licenses/gpl-license.php GNU Public License * @version $Id: config_local.php,v 1.2 2006/07/11 03:33:47 wtogami Exp $ * @package squirrelmail * @subpackage config */ //$default_folder_prefix = ''; ?> 安装ISPConfig 3 cd /tmp wget http://downloads.sourceforge.net/project/ispconfig/ISPConfig%203/ISPConfig-3.0.3.3/ISPConfig-3.0.3.3.tar.gz?r=&ts=1309567938&use_mirror=nchc tar xvfz ISPConfig-3.0.3.3.tar.gz cd ispconfig3_install/install/ php -q install.php
按如下提示操作：
——————————————————————————–
_____ ___________ _____ __ _
|_ _/ ___| ___ / __ / _(_)
| | `–.| |_/ / | / / ___ _ __ | |_ _ __ _
| | `–. __/ | | / _ | ‘_ | _| |/ _` |
_| |_/__/ / | | __/ (_) | | | | | | | (_| |
___/____/_| ____/___/|_| |_|_| |_|__, |
__/ |
|___/
——————————————————————————–
>> Initial configuration
Operating System: CentOS 5.2 or compatible
Following will be a few questions for primary configuration so be careful.
Default values are in [brackets] and can be accepted with .
Tap in “quit” (without the quotes) to stop the installer.
Select language (en,de) [en]:
Installation mode (standard,expert) [standard]: <-- ENTER
Full qualified hostname (FQDN) of the server, eg server1.domain.tld [server1.example.com]: <-- ENTER
MySQL server hostname [localhost]: <-- ENTER
MySQL root username [root]: <-- ENTER
MySQL root password []: <-- yourrootsqlpassword
MySQL database to create [dbispconfig]: <-- ENTER
MySQL charset [utf8]: <-- ENTER
Generating a 2048 bit RSA private key
…………………………………………+++
………………………………………………………………………+++
writing new private key to ‘smtpd.key’
—–
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter ‘.’, the field will be left blank.
—–
Country Name (2 letter coolcode) [GB]: <-- ENTER
State or Province Name (full name) [Berkshire]: <-- ENTER
Locality Name (eg, city) [Newbury]: <-- ENTER
Organization Name (eg, company) [My Company Ltd]: <-- ENTER
Organizational Unit Name (eg, section) []: <-- ENTER
Common Name (eg, your name or your server’s hostname) []: <-- ENTER
Email Address []: <-- ENTER
Configuring Jailkit
Configuring SASL
Configuring PAM
Configuring Courier
Configuring Spamassassin
Configuring Amavisd
Configuring Getmail
Configuring Pureftpd
Configuring MyDNS
Configuring Apache
Configuring Firewall
Installing ISPConfig
ISPConfig Port [8080]: <-- ENTER
Configuring DBServer
Installing Crontab
no crontab for root
no crontab for getmail
Restarting services …
Stopping MySQL: [ OK ]
Starting MySQL: [ OK ]
Shutting down postfix: [ OK ]
Starting postfix: [ OK ]
Stopping saslauthd: [ OK ]
Starting saslauthd: [ OK ]
Shutting down Mail Virus Scanner (amavisd): [ OK ]
Starting Mail Virus Scanner (amavisd): [ OK ]
Stopping Clam AntiVirus Daemon: [ OK ]
Starting Clam AntiVirus Daemon: [ OK ]
Stopping Courier authentication services: authdaemond
Starting Courier authentication services: authdaemond
Stopping Courier-IMAP server: imap imap-ssl pop3 pop3-ssl
Starting Courier-IMAP server: imap imap-ssl pop3 pop3-ssl
Stopping httpd: [ OK ]
Starting httpd: [ OK ]
Stopping pure-ftpd: [ OK ]
Starting pure-ftpd: [ OK ]
Installation completed.
之后，你就可以通过 http://server1.example.com:8080/ or http://192.168.0.100:8080/，用户名和密码都admin来登录后台了。
后台登录界面：
Administartor后台界面：
Reseller后台界面：
Client后台界面：
ISPConfig后台演示地址： http://www.ispconfig.org/ispconfig-3/online-demo/
官方网站： http://www.ispconfig.org/
参考文章： http://www.howtoforge.com/perfect-server-centos-5.2-ispconfig-3
类似资料：