登录
当前位置： 首页 > 工具软件 > LittleBlog > 使用案例 >

LittleFs的移植和使用

司空叶五
2023-12-01

由于前段时间换了一个开发平台，而之前使用的平台的文件系统是Fats，但是明显感觉文件的写入速度比较慢，应该是内部默认是64Kflash擦除，在网上偶然看到关于littlefs的文章，所以此次将整个移植过程贴出来供大家参考。

1.移植过程参考

https://blog.csdn.net/skyfreedoms/article/details/5837067
https://blog.csdn.net/qq_18204721/article/details/82490954

2.首先在GitHub上下载littlefs的源码

移植过程参考上述文章，需要注意的点为，如果你的平台没有微库，则需要自己实现自己的内存管理函数
// Allocate memory, only used if buffers are not provided to littlefs

static inline void *lfs_malloc(size_t size) {
#ifndef LFS_NO_MALLOC
return LocalAlloc(1,size);
#else
(void)size;
return NULL;
#endif
}

// Deallocate memory, only used if buffers are not provided to littlefs
static inline void lfs_free(void *p) {
#ifndef LFS_NO_MALLOC
LocalFree§;
#else
(void)p;
#endif
}

因为如果按照上面一篇博文使用全局数组的话，会导致无法打开多个文件，只能一次打开一个文件，显然不满足我们的需求，所以需要使用动态内存申请。

3.附上移植后的测试代码，方便大家理解

//lfs
#define LFS_TEST_DEMO
#ifdef LFS_TEST_DEMO
lfs_t g_lfs;
lfs_file_t g_lfs_file[3];
struct lfs_config g_lfs_cfg;
lfs_free_t g_lfs_free;
lfs_dir_t g_dir[2];
uint8_t lfs_read_buf[256] = {0};
uint8_t lfs_prog_buf[256] = {0};
uint8_t lfs_lookahead_buf[256] = {0};
uint8_t lfs_file_buf[256] = {0};

static int lfs_fuse_statfs_count(void* p,lfs_block_t block)
{
(lfs_size_t)p += 1;
return 0;
}

void lfs_free_spcae(u32* free_space)
{
lfs_size_t use_space = 0;
int err = lfs_traverse(&g_lfs,lfs_fuse_statfs_count,&use_space);
if(err)
{
return ;
}
*free_space = g_lfs_cfg.block_count - use_space;
}

void lfs_set_config(void)
{
// configuration of the filesystem is provided by this struct
g_lfs_cfg.read = block_device_read,
g_lfs_cfg.prog = block_device_prog,
g_lfs_cfg.erase = block_device_erase,
g_lfs_cfg.sync = block_device_sync,

g_lfs_cfg.read_size = 256,
g_lfs_cfg.prog_size = 256,
g_lfs_cfg.block_size = 4096,
g_lfs_cfg.block_count = 512,
g_lfs_cfg.lookahead = 256,

#if 0
g_lfs_cfg.read_buffer = lfs_read_buf;
g_lfs_cfg.prog_buffer = lfs_prog_buf;
g_lfs_cfg.lookahead_buffer = lfs_lookahead_buf;
g_lfs_cfg.file_buffer = lfs_file_buf;
#else //动态申请内存则可以处理多个文件 使用数组则不行
g_lfs_cfg.read_buffer = NULL;
g_lfs_cfg.prog_buffer = NULL;
g_lfs_cfg.lookahead_buffer = NULL;
g_lfs_cfg.file_buffer = NULL;
#endif

}

void lfs_test_demo(void)
{
#if 0
u8 lfs_write_buf1[1024] = {“123456789”};
u8 lfs_write_buf2[1024] = {“abcdefghi”};
u8 lfs_read_buf1[1024] = {0};
u8 lfs_read_buf2[1024] = {0};
u32 lfs_free_spcae_size = 0;
int lfs_dir_pos = 0;
struct lfs_info lfs_file_info = {0};
lfs_set_config();

// mount the filesystem
lfs_format(&g_lfs, &g_lfs_cfg);
int err = lfs_mount(&g_lfs, &g_lfs_cfg);

// reformat if we can't mount the filesystem
// this should only happen on the first boot
if (err) {
	LFS_DEBUG("lfs need formart flash to mount filesystem: %d\n", __LINE__);
    lfs_format(&g_lfs, &g_lfs_cfg);
    lfs_mount(&g_lfs, &g_lfs_cfg);
}

err = lfs_dir_open(&g_lfs, &g_dir[0], "E:");
LFS_DEBUG("lfs dir open error:%d  LINE %d\n",err, __LINE__);
if(err == LFS_ERR_NOENT)
{
	lfs_mkdir(&g_lfs ,"E:");
	LFS_DEBUG("lfs makedir LINE %d\n", __LINE__);
}

err = lfs_dir_open(&g_lfs, &g_dir[0], "E:/data");
LFS_DEBUG("lfs dir error:%d  LINE %d\n",err, __LINE__);
if(err == LFS_ERR_NOENT)
{
	lfs_mkdir(&g_lfs ,"E:/data");
	LFS_DEBUG("lfs makedir LINE %d\n", __LINE__);
}

lfs_free_spcae(&lfs_free_spcae_size);
LFS_DEBUG("lfs free spce = %d  LINE %d\n",lfs_free_spcae_size, __LINE__);


// read current count
err = lfs_file_open(&g_lfs, &g_lfs_file[0], "E:/boot1", LFS_O_RDWR | LFS_O_CREAT);
if (err) {
	LFS_DEBUG("lfs open1 error:%d  LINE %d\n",err, __LINE__);
}    

err = lfs_file_open(&g_lfs, &g_lfs_file[1], "E:/boot2", LFS_O_RDWR | LFS_O_CREAT);
if (err) {
	LFS_DEBUG("lfs open2 error:%d  LINE %d\n",err, __LINE__);
}    

err = lfs_file_open(&g_lfs, &g_lfs_file[2], "E:/data/boot3", LFS_O_RDWR | LFS_O_CREAT);
if (err) {
	LFS_DEBUG("lfs open3 error:%d  LINE %d\n",err, __LINE__);
} 

err = lfs_file_write(&g_lfs, &g_lfs_file[0], lfs_write_buf1, sizeof(lfs_write_buf1));
if (err) {
	LFS_DEBUG("lfs write1 len:%d  LINE %d\n",err, __LINE__);
}

err = lfs_file_write(&g_lfs, &g_lfs_file[1], lfs_write_buf2, sizeof(lfs_write_buf2));
if (err) {
	LFS_DEBUG("lfs write2 len:%d  LINE %d\n",err, __LINE__);
}

//if not set cursor will read data error
lfs_file_seek(&g_lfs, &g_lfs_file[0],0,LFS_SEEK_SET);
lfs_file_seek(&g_lfs, &g_lfs_file[1],0,LFS_SEEK_SET);


err = lfs_file_read(&g_lfs, &g_lfs_file[0], lfs_read_buf1, sizeof(lfs_read_buf1));
if (err) {
	LFS_DEBUG("lfs read len:%d  LINE %d\n", err,__LINE__);
}   


err = lfs_file_read(&g_lfs, &g_lfs_file[1], lfs_read_buf2, sizeof(lfs_read_buf2));
if (err) {
	LFS_DEBUG("lfs read2 len:%d  LINE %d\n", err,__LINE__);
}  


// remember the storage is not updated until the file is closed successfully
err = lfs_file_close(&g_lfs, &g_lfs_file[0]);
if (err) {
	LFS_DEBUG("lfs close1 error:%d  LINE %d\n", err,__LINE__);
} 


err = lfs_file_close(&g_lfs, &g_lfs_file[1]);
if (err) {
	LFS_DEBUG("lfs close2 error:%d  LINE %d\n", err,__LINE__);
} 

err = lfs_file_close(&g_lfs, &g_lfs_file[2]);
if (err) {
	LFS_DEBUG("lfs close3 error:%d  LINE %d\n", err,__LINE__);
} 

LFS_DEBUG("lfs read1 data: %s %d\n",lfs_read_buf1, __LINE__);
LFS_DEBUG("lfs read2 data: %s %d\n",lfs_read_buf2, __LINE__);



lfs_free_spcae(&lfs_free_spcae_size);
LFS_DEBUG("lfs free spce = %d  LINE %d\n",lfs_free_spcae_size, __LINE__);


lfs_stat(&g_lfs,"E:/boot1", &lfs_file_info);
LFS_DEBUG("lfs get E:/boot1 file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);

memset(&lfs_file_info,0x00,sizeof(lfs_file_info));

lfs_stat(&g_lfs,"E:", &lfs_file_info);
LFS_DEBUG("lfs get E: file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);


lfs_dir_open(&g_lfs, &g_dir[0], "E:");
lfs_dir_pos = lfs_dir_tell(&g_lfs, &g_dir[0]);
LFS_DEBUG("lfs dir tell = %d  LINE %d\n",lfs_dir_pos, __LINE__);

lfs_dir_read(&g_lfs, &g_dir[0], &lfs_file_info);
LFS_DEBUG("lfs get E:/ file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);
lfs_dir_read(&g_lfs, &g_dir[0], &lfs_file_info);	
LFS_DEBUG("lfs get E:/ file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);
lfs_dir_read(&g_lfs, &g_dir[0], &lfs_file_info);
LFS_DEBUG("lfs get E:/ file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);
lfs_dir_read(&g_lfs, &g_dir[0], &lfs_file_info);	
LFS_DEBUG("lfs get E:/ file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);

lfs_dir_open(&g_lfs, &g_dir[1], "E:/data");
lfs_dir_pos = lfs_dir_tell(&g_lfs, &g_dir[1]);
LFS_DEBUG("lfs dir tell = %d  LINE %d\n",lfs_dir_pos, __LINE__);

lfs_dir_read(&g_lfs, &g_dir[1], &lfs_file_info);
LFS_DEBUG("lfs get E:/data file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);
lfs_dir_read(&g_lfs, &g_dir[1], &lfs_file_info);	
LFS_DEBUG("lfs get E:/data file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);
lfs_dir_read(&g_lfs, &g_dir[1], &lfs_file_info);
LFS_DEBUG("lfs get E:/data file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);
lfs_dir_read(&g_lfs, &g_dir[1], &lfs_file_info);	
LFS_DEBUG("lfs get E:/data file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);


lfs_dir_open(&g_lfs, &g_dir[1], ".");
lfs_dir_pos = lfs_dir_tell(&g_lfs, &g_dir[1]);
LFS_DEBUG("lfs dir tell = %d  LINE %d\n",lfs_dir_pos, __LINE__);

lfs_dir_read(&g_lfs, &g_dir[1], &lfs_file_info);
LFS_DEBUG("lfs get ./ file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);
lfs_dir_read(&g_lfs, &g_dir[1], &lfs_file_info);	
LFS_DEBUG("lfs get ./ file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);
lfs_dir_read(&g_lfs, &g_dir[1], &lfs_file_info);
LFS_DEBUG("lfs get ./ file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);
lfs_dir_read(&g_lfs, &g_dir[1], &lfs_file_info);	
LFS_DEBUG("lfs get ./ file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);


// release any resources we were using
err = lfs_unmount(&g_lfs);
if (err) {
	LFS_DEBUG("lfs ummount error: %d\n", __LINE__);
} 

// print the boot count
LFS_DEBUG("boot_count: %s\n", lfs_read_buf1);
LFS_DEBUG("boot_count: %s\n", lfs_read_buf2);

#else //无目录写法
u8 lfs_write_buf1[1024] = {“123456789”};
u8 lfs_write_buf2[1024] = {“abcdefghi”};
u8 lfs_read_buf1[1024] = {0};
u8 lfs_read_buf2[1024] = {0};
u32 lfs_free_spcae_size = 0;
int lfs_dir_pos = 0;
struct lfs_info lfs_file_info = {0};
lfs_set_config();

// mount the filesystem
lfs_format(&g_lfs, &g_lfs_cfg);
int err = lfs_mount(&g_lfs, &g_lfs_cfg);

// reformat if we can't mount the filesystem
// this should only happen on the first boot
if (err) {
	LFS_DEBUG("lfs need formart flash to mount filesystem: %d\n", __LINE__);
    lfs_format(&g_lfs, &g_lfs_cfg);
    lfs_mount(&g_lfs, &g_lfs_cfg);
}

lfs_free_spcae(&lfs_free_spcae_size);
LFS_DEBUG("lfs free spce = %d  LINE %d\n",lfs_free_spcae_size, __LINE__);


// read current count
err = lfs_file_open(&g_lfs, &g_lfs_file[0], "E:\\boot1", LFS_O_RDWR | LFS_O_CREAT);
if (err) {
	LFS_DEBUG("lfs open1 error:%d  LINE %d\n",err, __LINE__);
}    

err = lfs_file_open(&g_lfs, &g_lfs_file[1], "E:\\boot2", LFS_O_RDWR | LFS_O_CREAT);
if (err) {
	LFS_DEBUG("lfs open2 error:%d  LINE %d\n",err, __LINE__);
}    

err = lfs_file_open(&g_lfs, &g_lfs_file[2], "E:\\boot3", LFS_O_RDWR | LFS_O_CREAT);
if (err) {
	LFS_DEBUG("lfs open3 error:%d  LINE %d\n",err, __LINE__);
} 

err = lfs_file_write(&g_lfs, &g_lfs_file[0], lfs_write_buf1, sizeof(lfs_write_buf1));
if (err) {
	LFS_DEBUG("lfs write1 len:%d  LINE %d\n",err, __LINE__);
}

err = lfs_file_write(&g_lfs, &g_lfs_file[1], lfs_write_buf2, sizeof(lfs_write_buf2));
if (err) {
	LFS_DEBUG("lfs write2 len:%d  LINE %d\n",err, __LINE__);
}

//if not set cursor will read data error
lfs_file_seek(&g_lfs, &g_lfs_file[0],0,LFS_SEEK_SET);
lfs_file_seek(&g_lfs, &g_lfs_file[1],0,LFS_SEEK_SET);


err = lfs_file_read(&g_lfs, &g_lfs_file[0], lfs_read_buf1, sizeof(lfs_read_buf1));
if (err) {
	LFS_DEBUG("lfs read len:%d  LINE %d\n", err,__LINE__);
}   


err = lfs_file_read(&g_lfs, &g_lfs_file[1], lfs_read_buf2, sizeof(lfs_read_buf2));
if (err) {
	LFS_DEBUG("lfs read2 len:%d  LINE %d\n", err,__LINE__);
}  


// remember the storage is not updated until the file is closed successfully
err = lfs_file_close(&g_lfs, &g_lfs_file[0]);
if (err) {
	LFS_DEBUG("lfs close1 error:%d  LINE %d\n", err,__LINE__);
} 


err = lfs_file_close(&g_lfs, &g_lfs_file[1]);
if (err) {
	LFS_DEBUG("lfs close2 error:%d  LINE %d\n", err,__LINE__);
} 

err = lfs_file_close(&g_lfs, &g_lfs_file[2]);
if (err) {
	LFS_DEBUG("lfs close3 error:%d  LINE %d\n", err,__LINE__);
} 

LFS_DEBUG("lfs read1 data: %s %d\n",lfs_read_buf1, __LINE__);
LFS_DEBUG("lfs read2 data: %s %d\n",lfs_read_buf2, __LINE__);



lfs_free_spcae(&lfs_free_spcae_size);
LFS_DEBUG("lfs free spce = %d  LINE %d\n",lfs_free_spcae_size, __LINE__);


lfs_dir_open(&g_lfs, &g_dir[0], ".");
lfs_dir_pos = lfs_dir_tell(&g_lfs, &g_dir[0]);
LFS_DEBUG("lfs dir tell = %d  LINE %d\n",lfs_dir_pos, __LINE__);

lfs_dir_read(&g_lfs, &g_dir[0], &lfs_file_info);
LFS_DEBUG("lfs get ./ file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);
lfs_dir_read(&g_lfs, &g_dir[0], &lfs_file_info);	
LFS_DEBUG("lfs get ./ file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);
lfs_dir_read(&g_lfs, &g_dir[0], &lfs_file_info);
LFS_DEBUG("lfs get ./ file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);
lfs_dir_read(&g_lfs, &g_dir[0], &lfs_file_info);	
LFS_DEBUG("lfs get ./ file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);
lfs_dir_read(&g_lfs, &g_dir[0], &lfs_file_info);	
LFS_DEBUG("lfs get ./ file info type = %d size = %d  filename = %s LINE %d\n",lfs_file_info.type,lfs_file_info.size,lfs_file_info.name, __LINE__);


// release any resources we were using
err = lfs_unmount(&g_lfs);
if (err) {
	LFS_DEBUG("lfs ummount error: %d\n", __LINE__);
} 

// print the boot count
LFS_DEBUG("boot_count: %s\n", lfs_read_buf1);
LFS_DEBUG("boot_count: %s\n", lfs_read_buf2);

#endif
}
#endif
其他的深入就交给大家自己去发掘吧。^ - ^

 类似资料：

相关阅读

将代码从使用计时器移植到Scheduledexecutorservice使用催化剂移植到Mac时排除PodSQLAlchemy-用于测试的SQLite和用于开发的Postgresql-如何移植？可移植SQL：唯一主键如何在bash中使python脚本“可移植”？

相关文章

UE4设置人物移动和人物视角数组和链表的区别、ArrayList和LinkedList的区别、使用LinkedList模拟栈和队列TensorFlow TFLearn安装和使用网站迁移Websocket移动APP

相关问答

如何使NetBeans项目更具可移植性？将 Django 项目移植到 Python 3 和 Django 2 时迁移问题IEEE754浮点值的可移植串行化确定 javax.enterprise.inject.spi.Extension 中的 JNDI 可移植名称'ulimit-t'在shell和OSS之间完全不可移植？

相关文档

fbreader 和 移动 DM 和 加解密迁移到云原生应用架构使用 Express 和 MongoDB 搭建多人博客SUI 移动开发UI库DWZ 移动端开发文档
快捷导航： 新手教程 算法原理 架构设计 Java进阶 数据库进阶 大厂专栏 面试经验 编程笔记 编程问答 所有专题 文档资料 工具软件 电子书籍 小牛导航
在线工具： 房贷计算器 个税计算器 Linux命令查询 Json格式化 正则表达式 颜色转换 AES加解密 SHA1加密 MD5加密 毒鸡汤 字数统计 随机密码生成 进制转换 Base64编解码 励志句子
Copyright © 2019-2024 小牛知识库@xnip.cn. All Rights Reserved.