电信路由器用linux开发板,WRTnode: WRTnode是基于家用无线路由器芯片的开源Linux开发板，想法源于我之前的项目和产业经验...

如果你有任何问题，可以上ask.wrtnode.cc提问，或加入Q群 331983270

If you have any question about this SDK, please post the issue to ask.wrtnode.cc or join our QQ group 331983270

Hi this is the OpenWrt for WRTnodes

links

[http://wrtnode.cc]

[http://wiki.wrtnode.cc]

[http://wiki.wrtnode.com]

mail: pub$wrntode.com

=========================================================================

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated

configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,

find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions

defined in feeds.conf / feeds.conf.default respectively

and "./scripts/feeds install -a" to install symlinks of all of them into

package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.

It will download all sources, build the cross-compile toolchain,

the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded

system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution

and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system

(case-sensitive filesystem required). Cygwin will not be supported because of

the lack of case sensitiveness in the file system.

Sunshine!

Your OpenWrt Project

http://openwrt.org