seachange服务器装系统,其他部署说明 – 开机启动 Seafile - Seafile 服务器用户手册...

艾焱

2023-12-01

对于运行 systemd 的系统

例如 Debian 8 以及更新的版本，Ubuntu 15.04以及更新的版本。

创建 systemd 服务管理文件，将以下示例中 ${seafile_dir} 替换为您自己的 seaile 安装路径，并且将 user 指向真正运行seafile的用户。然后您需要重新加载 systemd 的守护进程：systemctl daemon-reload。

创建 systemd 服务文件 /etc/systemd/system/seafile.service

sudo vim /etc/systemd/system/seafile.service

文件内容如下：

[Unit]

Description=Seafile

# add mysql.service or postgresql.service depending on your database to the line below

After=network.target

[Service]

Type=oneshot

ExecStart=${seafile_dir}/seafile-server-latest/seafile.sh start

ExecStop=${seafile_dir}/seafile-server-latest/seafile.sh stop

RemainAfterExit=yes

User=seafile

Group=seafile

[Install]

WantedBy=multi-user.target

创建 systemd 服务文件 /etc/systemd/system/seahub.service

sudo vim /etc/systemd/system/seahub.service

文件内容如下(如果你想要运行fastcgi模式，请不要忘记修改它。)

[Unit]

Description=Seafile hub

After=network.target seafile.service

[Service]

# change start to start-fastcgi if you want to run fastcgi

ExecStart=${seafile_dir}/seafile-server-latest/seahub.sh start

ExecStop=${seafile_dir}/seafile-server-latest/seahub.sh stop

User=seafile

Group=seafile

Type=oneshot

RemainAfterExit=yes

[Install]

WantedBy=multi-user.target

创建 systemd 服务文件 /etc/systemd/system/seafile-client.service (可选)

只有在你有了 seafile 控制台客户端并且希望开机运行此程序时你才需要创建此文件。

sudo vim /etc/systemd/system/seafile-client.service

文件内容如下：

[Unit]

Description=Seafile client

# Uncomment the next line you are running seafile client on the same computer as server

# After=seafile.service

# Or the next one in other case

# After=network.target

[Service]

Type=oneshot

ExecStart=/usr/bin/seaf-cli start

ExecStop=/usr/bin/seaf-cli stop

RemainAfterExit=yes

User=seafile

Group=seafile

[Install]

WantedBy=multi-user.target

设置服务开机自启动

sudo systemctl enable seafile.service

sudo systemctl enable seahub.service

sudo systemctl enable seafile-client.service # 可选

对于使用 init 而非 systemd 的系统

Ubuntu 14.10 以及更旧的版本

在没有 systemd 的 Ubuntu 系统上，我们使用 /etc/init.d/ 脚本来设置 seafile/seahub 开机自启动。

创建一个脚本 /etc/init.d/seafile-server

sudo vim /etc/init.d/seafile-server

脚本内容如下：(你需要根据实际情况修改 user 和 seafile_dir 的值)

#!/bin/bash

### BEGIN INIT INFO

# Provides: seafile-server

# Required-Start: $remote_fs $syslog

# Required-Stop: $remote_fs $syslog

# Default-Start: 2 3 4 5

# Default-Stop: 0 1 6

# Short-Description: Seafile server

# Description: Start Seafile server

### END INIT INFO

# Change the value of "user" to your linux user name

user=haiwen

# Change the value of "seafile_dir" to your path of seafile installation

# usually the home directory of $user

seafile_dir=/data/haiwen

script_path=${seafile_dir}/seafile-server-latest

seafile_init_log=${seafile_dir}/logs/seafile.init.log

seahub_init_log=${seafile_dir}/logs/seahub.init.log

# Change the value of fastcgi to true if fastcgi is to be used

fastcgi=false

# Set the port of fastcgi, default is 8000. Change it if you need different.

fastcgi_port=8000

# Write a polite log message with date and time

echo -e "n n About to perform $1 for seafile at `date -Iseconds` n " >> ${seafile_init_log}

echo -e "n n About to perform $1 for seahub at `date -Iseconds` n " >> ${seahub_init_log}

case "$1" in

start)

sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}

if [ $fastcgi = true ];

then

sudo -u ${user} ${script_path}/seahub.sh ${1}-fastcgi ${fastcgi_port} >> ${seahub_init_log}

else

sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}

;;

restart)

sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}

if [ $fastcgi = true ];

then

sudo -u ${user} ${script_path}/seahub.sh ${1}-fastcgi ${fastcgi_port} >> ${seahub_init_log}

else

sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}

;;

stop)

sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}

sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}

;;

echo "Usage: /etc/init.d/seafile-server {start|stop|restart}"

exit 1

;;

esac

注意：如果你正在使用本地 mysql 服务，请将 # Required-Start: $remote_fs $syslog 替换为 # Required-Start: $remote_fs $syslog mysql.

确保 seafile-server 脚本可执行

sudo chmod +x /etc/init.d/seafile-server

添加 seafile-server 到 rc.d 中

sudo update-rc.d seafile-server defaults

注意：如果你更新了你的 seafile 服务，不要忘记更新 script_path 的值。

其他基于 Debian 的发行版

创建一个脚本 /etc/init.d/seafile-server

sudo vim /etc/init.d/seafile-server

脚本内容如下：(你需要根据实际情况修改 user 和 seafile_dir 的值)

#!/bin/sh

### BEGIN INIT INFO

# Provides: seafile-server

# Required-Start: $local_fs $remote_fs $network

# Required-Stop: $local_fs

# Default-Start: 2 3 4 5

# Default-Stop: 0 1 6

# Short-Description: Starts Seafile Server

# Description: starts Seafile Server

### END INIT INFO

# Change the value of "user" to linux user name who runs seafile

user=haiwen

# Change the value of "seafile_dir" to your path of seafile installation

# usually the home directory of $user

seafile_dir=/data/haiwen

script_path=${seafile_dir}/seafile-server-latest

seafile_init_log=${seafile_dir}/logs/seafile.init.log

seahub_init_log=${seafile_dir}/logs/seahub.init.log

# Change the value of fastcgi to true if fastcgi is to be used

fastcgi=false

# Set the port of fastcgi, default is 8000. Change it if you need different.

fastcgi_port=8000

# Write a polite log message with date and time

echo -e "n n About to perform $1 for seafile at `date -Iseconds` n " >> ${seafile_init_log}

echo -e "n n About to perform $1 for seahub at `date -Iseconds` n " >> ${seahub_init_log}

case "$1" in

start)

sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}

if [ $fastcgi = true ];

then

sudo -u ${user} ${script_path}/seahub.sh ${1}-fastcgi ${fastcgi_port} >> ${seahub_init_log}

else

sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}

;;

restart)

sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}

if [ $fastcgi = true ];

then

sudo -u ${user} ${script_path}/seahub.sh ${1}-fastcgi ${fastcgi_port} >> ${seahub_init_log}

else

sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}

;;

stop)

sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}

sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}

;;

echo "Usage: /etc/init.d/seafile-server {start|stop|restart}"

exit 1

;;

esac

注意：

如果你想要以 fastcgi 模式运行 seahub ,只需要将 fastcgi 的值配置为 true

如果你是在 MySQL 下部署 Seafile，添加 “mysql” 到 Required-Start 那行：

# Required-Start: $local_fs $remote_fs $network mysql

为日志添文件加目录

mkdir /path/to/seafile/dir/logs

确保 seafile-server 脚本可执行

sudo chmod +x /etc/init.d/seafile-server

添加 seafile-server 到 rc.d

sudo updata-rc.d seafile-server defaults

完成

如果你更新了你的 seafile 服务，不要忘记更新 script_path 的值。

RHEL/CentOS

在 RHEL/CentOS 上，脚本 /etc/re.local 会在系统启动时被执行，所以可以通过这个脚本来实现 seafile/seahub 开机自启。

确定您的 python 版本 (python 2.6 或者 2.7)

which python2.6 # 或者 "which python2.7"

在 /etc/rc.local 中添加 python2.6(2.7) 的目录到 PATH,并且添加 seafile/seahub 的启动命令

# Assume the python 2.6(2.7) executable is in "/usr/local/bin"

PATH=$PATH:/usr/local/bin/

# Change the value of "user" to your linux user name

user=haiwen

# Change the value of "seafile_dir" to your path of seafile installation

# usually the home directory of $user

seafile_dir=/data/haiwen

script_path=${seafile_dir}/seafile-server-latest

sudo -u ${user} ${script_path}/seafile.sh start > /tmp/seafile.init.log 2>&1

sudo -u ${user} ${script_path}/seahub.sh start > /tmp/seahub.init.log 2>&1

注意：如果你想要以 fastcgi 模式启动，只需要将最后一行的 “seahub.sh start” 改为 “seahub.sh start-fastcgi”

完成。如果你更新了你的 seafile 服务，不要忘记更新 script_path 的值。

RHEL/CentOS (run as service)

在 RHEL/CentOS 我们使用 /etc/init.d/ 脚本来实现 seafile/seahub 服务开机自启动。

创建文件 /etc/sysconfig/seafile

# Change the value of "user" to your linux user name

user=haiwen

# Change the value of "seafile_dir" to your path of seafile installation

# usually the home directory of $user

seafile_dir=/data/haiwen

script_path=${seafile_dir}/seafile-server-latest

seafile_init_log=${seafile_dir}/logs/seafile.init.log

seahub_init_log=${seafile_dir}/logs/seahub.init.log

# Change the value of fastcgi to true if fastcgi is to be used

fastcgi=false

# Set the port of fastcgi, default is 8000. Change it if you need different.

fastcgi_port=8000

创建一个脚本 /etc/init.d/seafile

#!/bin/bash

# seafile

# chkconfig: - 68 32

# description: seafile

# Source function library.

. /etc/init.d/functions

# Source networking configuration.

. /etc/sysconfig/network

if [ -f /etc/sysconfig/seafile ];then

. /etc/sysconfig/seafile

else

echo "Config file /etc/sysconfig/seafile not found! Bye."

exit 200

RETVAL=0

start() {

# Start daemons.

echo -n $"Starting seafile: "

ulimit -n 30000

su - ${user} -c"${script_path}/seafile.sh start >> ${seafile_init_log} 2>&1"

RETVAL=$?

echo

[ $RETVAL -eq 0 ] && touch /var/lock/subsys/seafile

return $RETVAL

}

stop() {

echo -n $"Shutting down seafile: "

su - ${user} -c"${script_path}/seafile.sh stop >> ${seafile_init_log} 2>&1"

RETVAL=$?

echo

[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/seafile

return $RETVAL

}

# Write a polite log message with date and time

echo -e "n n About to perform $1 for seafile at `date -Iseconds` n " >> ${seafile_init_log}

# See how we were called.

case "$1" in

start)

start

;;

stop)

stop

;;

restart|reload)

stop

start

RETVAL=$?

;;

echo $"Usage: $0 {start|stop|restart}"

RETVAL=3

esac

exit $RETVAL

创建脚本 /etc/init.d/seahub

#!/bin/bash

# seahub

# chkconfig: - 69 31

# description: seahub

# Source function library.

. /etc/init.d/functions

# Source networking configuration.

. /etc/sysconfig/network

if [ -f /etc/sysconfig/seafile ];then

. /etc/sysconfig/seafile

else

echo "Config file /etc/sysconfig/seafile not found! Bye."

exit 200

RETVAL=0

start() {

# Start daemons.

echo -n $"Starting seahub: "

ulimit -n 30000

if [ $fastcgi = true ];

then

su - ${user} -c"${script_path}/seahub.sh start-fastcgi ${fastcgi_port} >> ${seahub_init_log} 2>&1"

else

su - ${user} -c"${script_path}/seahub.sh start >> ${seahub_init_log} 2>&1"

RETVAL=$?

echo

[ $RETVAL -eq 0 ] && touch /var/lock/subsys/seahub

return $RETVAL

}

stop() {

echo -n $"Shutting down seahub: "

su - ${user} -c"${script_path}/seahub.sh stop >> ${seahub_init_log} 2>&1"

RETVAL=$?

echo

[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/seahub

return $RETVAL

}

# Write a polite log message with date and time

echo -e "n n About to perform $1 for seahub at `date -Iseconds` n " >> ${seahub_init_log}

# See how we were called.

case "$1" in

start)

start

;;

stop)

stop

;;

restart|reload)

stop

start

RETVAL=$?

;;

echo $"Usage: $0 {start|stop|restart}"

RETVAL=3

esac

exit $RETVAL

然后设置开机自启：

chmod 550 /etc/init.d/seafile

chmod 550 /etc/init.d/seahub

chkconfig --add seafile

chkconfig --add seahub

chkconfig seahub on

chkconfig seafile on

并且运行：

service seafile start

service seahub start

seachange服务器装系统,其他部署说明 – 开机启动 Seafile - Seafile 服务器用户手册...

相关阅读

相关文章

相关问答

相关文档