linux开机自动seafile,开机启动 Seafile
# 开机启动 Seafile
### Ubuntu 下
Ubuntu下，我们使用了这个[/etc/init.d/](https://help.ubuntu.com/community/UbuntuBootupHowto)这个脚本来设置Seafile/Seahub 开机启动.
### 创建**/etc/init.d/seafile-server**脚本
~~~
sudo vim /etc/init.d/seafile-server
~~~
脚本内容为: (同时需要修改相应的`user`和`script\_path`字段的值)
~~~
#!/bin/sh
# 请将 user 改为你的Linux用户名
user=haiwen
# 请将 script_dir 改为你的 Seafile 文件安装路径
seafile_dir=/data/haiwen
script_path=${seafile_dir}/seafile-server-latest
seafile_init_log=${seafile_dir}/logs/seafile.init.log
seahub_init_log=${seafile_dir}/logs/seahub.init.log
# 若使用 fastcgi, 请将其设置为true
fastcgi=false
# fastcgi 端口, 默认为 8000.
fastcgi_port=8000
case "$1" in
start)
sudo -u ${user} ${script_path}/seafile.sh start >> ${seafile_init_log}
if [ $fastcgi = true ];
then
sudo -u ${user} ${script_path}/seahub.sh start-fastcgi ${fastcgi_port} >> ${seahub_init_log}
else
sudo -u ${user} ${script_path}/seahub.sh start >> ${seahub_init_log}
fi
;;
restart)
sudo -u ${user} ${script_path}/seafile.sh restart >> ${seafile_init_log}
if [ $fastcgi = true ];
then
sudo -u ${user} ${script_path}/seahub.sh restart-fastcgi ${fastcgi_port} >> ${seahub_init_log}
else
sudo -u ${user} ${script_path}/seahub.sh restart >> ${seahub_init_log}
fi
;;
stop)
sudo -u ${user} ${script_path}/seafile.sh $1 >> ${seafile_init_log}
sudo -u ${user} ${script_path}/seahub.sh $1 >> ${seahub_init_log}
;;
*)
echo "Usage: /etc/init.d/seafile {start|stop|restart}"
exit 1
;;
esac
~~~
**注意**: 如果你想在 fastcgi 下运行 Seahub,请设置`fastcgi`变量为`true`
### 为日志文件创建目录
~~~
mkdir /path/to/seafile/dir/logs
~~~
### 创建**/etc/init/seafile-server.conf**文件
#### 非使用 MySQL
~~~
start on (runlevel [2345])
stop on (runlevel [016])
pre-start script
/etc/init.d/seafile-server start
end script
post-stop script
/etc/init.d/seafile-server stop
end script
~~~
#### 使用 MySQL
~~~
start on (started mysql
and runlevel [2345])
stop on (runlevel [016])
pre-start script
/etc/init.d/seafile-server start
end script
post-stop script
/etc/init.d/seafile-server stop
end script
~~~
### 设置 seafile-sever 脚本为可执行文件
~~~
sudo chmod +x /etc/init.d/seafile-server
~~~
### 完成
在升级 Seafile 服务器后请记得更新`script\_path`的值.
### 其他 Debian 系的 Linux 下
### 创建脚本**/etc/init.d/seafile-server**
~~~
sudo vim /etc/init.d/seafile-server
~~~
脚本内容为: (同时需要修改相应的`user`和`script\_path`字段的值)
~~~
#!/bin/sh
### BEGIN INIT INFO
# Provides: seafile-server
# Required-Start: $local_fs $remote_fs $network
# Required-Stop: $local_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Starts Seafile Server
# Description: starts Seafile Server
### END INIT INFO
# 请将 user 改为你的Linux用户名
user=haiwen
# 请将 script_path 改为你的 Seafile 文件安装路径
seafile_dir=/data/haiwen
script_path=${seafile_dir}/seafile-server-latest
seafile_init_log=${seafile_dir}/logs/seafile.init.log
seahub_init_log=${seafile_dir}/logs/seahub.init.log
# 若使用 fastcgi, 请将其设置为true
fastcgi=false
# fastcgi 端口, 默认为 8000.
fastcgi_port=8000
case "$1" in
start)
sudo -u ${user} ${script_path}/seafile.sh start >> ${seafile_init_log}
if [ $fastcgi = true ];
then
sudo -u ${user} ${script_path}/seahub.sh start-fastcgi ${fastcgi_port} >> ${seahub_init_log}
else
sudo -u ${user} ${script_path}/seahub.sh start >> ${seahub_init_log}
fi
;;
restart)
sudo -u ${user} ${script_path}/seafile.sh restart >> ${seafile_init_log}
if [ $fastcgi = true ];
then
sudo -u ${user} ${script_path}/seahub.sh restart-fastcgi ${fastcgi_port} >> ${seahub_init_log}
else
sudo -u ${user} ${script_path}/seahub.sh restart >> ${seahub_init_log}
fi
;;
stop)
sudo -u ${user} ${script_path}/seafile.sh $1 >> ${seafile_init_log}
sudo -u ${user} ${script_path}/seahub.sh $1 >> ${seahub_init_log}
;;
*)
echo "Usage: /etc/init.d/seafile {start|stop|restart}"
exit 1
;;
esac
~~~
**注意**: 如果你想在 fastcgi 下运行 Seahub,请设置`fastcgi`变量为`true`
### 为日志文件创建目录
~~~
mkdir /path/to/seafile/dir/logs
~~~
### 设置 seafile-sever 脚本为可执行文件
~~~
sudo chmod +x /etc/init.d/seafile-server
~~~
### 在 rc.d 中新增 seafile-server
~~~
sudo update-rc.d seafile-server defaults
~~~
### 完成
在升级 Seafile 服务器后请记得更新`script\_path`的值.
### RHEL/CentOS 下
RHEL/CentOS 下,[/etc/rc.local](http://www.centos.org/docs/5/html/Installation_Guide-en-US/s1-boot-init-shutdown-run-boot.html)脚本会随系统开机自动执行,所以我们在这个脚本中设置启动Seafile/Seahub.
- 定位 python(python 2.6 or 2.7)
~~~
which python2.6 # or "which python2.7"
~~~
- 在 /etc/rc.local 脚本中, 将 python2.6(2.7)路径加入到**PATH**字段中,并增加 Seafile/Seahub 启动命令
~~~
`
# 假设 python 2.6(2.7) 可执行文件在 /usr/local/bin 目录下
PATH=$PATH:/usr/local/bin/
# 请将 user 改为你的Linux用户名
user=haiwen
# 请将 script_path 改为你的 Seafile 文件安装路径
seafile_dir=/data/haiwen
script_path=${seafile_dir}/seafile-server-latest
sudo -u ${user} ${script_path}/seafile.sh start > /tmp/seafile.init.log 2>&1
sudo -u ${user} ${script_path}/seahub.sh start > /tmp/seahub.init.log 2>&1
~~~
**注意**: 如果你想在fastcgi下启动Seahub,只需将上文中最后一行**"seahub.sh start"**改为**"seahub.shstart-fastcgi"**
- 完成. 在升级 Seafile 服务器后请记得更新 `script\_pat` 的值.
### 只使用 RHEL/CentOS 为服务程序(service)下
RHEL/CentOS 下 , 我们通过 /etc/init.d/ 脚本将 Seafile/Seahub作为服务程序随开机启动.
### 创建**/etc/sysconfig/seafile**文件
~~~
# 请将 user 改为你的Linux用户名
user=haiwen
# 请将 script_path 改为你的 Seafile 文件安装路径
seafile_dir=/home/haiwen
script_path=${seafile_dir}/seafile-server-latest
seafile_init_log=${seafile_dir}/logs/seafile.init.log
seahub_init_log=${seafile_dir}/logs/seahub.init.log
# 若使用 fastcgi, 请将其设置true
fastcgi=false
# fastcgi 端口, 默认为 8000.
fastcgi_port=8000
~~~
### 创建**/etc/init.d/seafile**文件
~~~
#!/bin/bash
#
# seafile
#
# chkconfig: - 68 32
# description: seafile
# Source function library.
. /etc/init.d/functions
# Source networking configuration.
. /etc/sysconfig/network
if [ -f /etc/sysconfig/seafile ];then
. /etc/sysconfig/seafile
else
echo "Config file /etc/sysconfig/seafile not found! Bye."
exit 200
fi
RETVAL=0
start() {
# Start daemons.
echo -n $"Starting seafile: "
ulimit -n 30000
su - ${user} -c"${script_path}/seafile.sh start >> ${seafile_init_log} 2>&1"
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/seafile
return $RETVAL
}
stop() {
echo -n $"Shutting down seafile: "
su - ${user} -c"${script_path}/seafile.sh stop >> ${seafile_init_log} 2>&1"
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/seafile
return $RETVAL
}
# See how we were called.
case "$1" in
start)
start
;;
stop)
stop
;;
restart|reload)
stop
start
RETVAL=$?
;;
*)
echo $"Usage: $0 {start|stop|restart}"
RETVAL=3
esac
exit $RETVAL
~~~
### 创建**/etc/init.d/seahub**脚本
~~~
#!/bin/bash
#
# seahub
#
# chkconfig: - 69 31
# description: seahub
# Source function library.
. /etc/init.d/functions
# Source networking configuration.
. /etc/sysconfig/network
if [ -f /etc/sysconfig/seafile ];then
. /etc/sysconfig/seafile
else
echo "Config file /etc/sysconfig/seafile not found! Bye."
exit 200
fi
RETVAL=0
start() {
# Start daemons.
echo -n $"Starting seahub: "
ulimit -n 30000
if [ $fastcgi = true ];
then
su - ${user} -c"${script_path}/seahub.sh start-fastcgi ${fastcgi_port} >> ${seahub_init_log} 2>&1"
else
su - ${user} -c"${script_path}/seahub.sh start >> ${seahub_init_log} 2>&1"
fi
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/seahub
return $RETVAL
}
stop() {
echo -n $"Shutting down seafile: "
su - ${user} -c"${script_path}/seahub.sh stop >> ${seahub_init_log} 2>&1"
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/seahub
return $RETVAL
}
# See how we were called.
case "$1" in
start)
start
;;
stop)
stop
;;
restart|reload)
stop
start
RETVAL=$?
;;
*)
echo $"Usage: $0 {start|stop|restart}"
RETVAL=3
esac
exit $RETVAL
~~~
接下来启动服务程序:
~~~
chmod 550 /etc/init.d/seafile
chmod 550 /etc/init.d/seahub
chkconfig --add seafile
chkconfig --add seahub
chkconfig seahub on
chkconfig seafile on
~~~
执行:
~~~
service seafile start
service seahub start
~~~
### 完成