parsel安装老是失败_perl不能安装Spreadsheet::ParseExcel与Spreadsheet::ParseExcel::Workbook模块...

C:\Documents and Settings\Administrator>cpan Spreadsheet::ParseExcel

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/Cell.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/Dump.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/FmtDefault.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/FmtJapan.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/FmtJapan2.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/FmtUnicode.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/Font.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/Format.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/SaveParser/

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/SaveParser.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/Utility.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/Workbook.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/Worksheet.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/SaveParser/Workbook.pm

Spreadsheet-ParseExcel-0.59/lib/Spreadsheet/ParseExcel/SaveParser/Worksheet.pm

Spreadsheet-ParseExcel-0.59/examples/a_simple_parser.pl

Spreadsheet-ParseExcel-0.59/examples/display_text_table.pl

CPAN.pm: Going to build J/JM/JMCNAMARA/Spreadsheet-ParseExcel-0.59.tar.gz

gcc.exe: Extraneous argument to `--' option

gcc.exe: No input files specified.

Use of uninitialized value $gccversion in substitution (s///) at C:/Perl/lib/Act

ivePerl/Config.pm line 116.

Use of uninitialized value $gccversion in scalar chomp at C:/Perl/lib/ActivePerl

/Config.pm line 117.

Use of uninitialized value $gccversion in concatenation (.) or string at C:/Perl

/lib/ActivePerl/Config.pm line 118.

Set up gcc environment -

It looks like you don't have a C compiler and make utility installed.  Trying

to install dmake and the MinGW gcc compiler using the Perl Package Manager.

This may take a a few minutes...

Downloading MinGW-5.1.4.1...redirect

Downloading MinGW-5.1.4.1...failed 401 Authorization Required

ppm.bat install failed: 401 Authorization Required

It looks like the installation of dmake and MinGW has failed.  You will not be

able to run Makefile commands or compile C extension code.  Please check your

internet connection and your proxy settings!

Checking if your kit is complete...

Looks good

Warning: prerequisite Crypt::RC4 0 not found.

Warning: prerequisite Digest::Perl::MD5 0 not found.

Warning: prerequisite IO::Scalar 0 not found.

Warning: prerequisite OLE::Storage_Lite 0.19 not found.

Writing Makefile for Spreadsheet::ParseExcel

----   Unsatisfied dependencies detected during   ----

---- JMCNAMARA/Spreadsheet-ParseExcel-0.59.tar.gz ----

Crypt::RC4 [requires]

IO::Scalar [requires]

OLE::Storage_Lite [requires]

Digest::Perl::MD5 [requires]

Running make test

Delayed until after prerequisites

Running make install

Delayed until after prerequisites

Running install for module 'Crypt::RC4'

Running make for S/SI/SIFUKURT/Crypt-RC4-2.02.tar.gz

Checksum for C:\Perl\cpan\sources\authors\id\S\SI\SIFUKURT\Crypt-RC4-2.02.tar.gz

ok

Crypt-RC4-2.02/

Crypt-RC4-2.02/RC4.pm

Crypt-RC4-2.02/Makefile.PL

Crypt-RC4-2.02/Changes

Crypt-RC4-2.02/MANIFEST

Crypt-RC4-2.02/test.pl

CPAN.pm: Going to build S/SI/SIFUKURT/Crypt-RC4-2.02.tar.gz

gcc.exe: Extraneous argument to `--' option

gcc.exe: No input files specified.

Set up gcc environment -

It looks like you don't have a C compiler and make utility installed.  Trying

to install dmake and the MinGW gcc compiler using the Perl Package Manager.

This may take a a few minutes...

Downloading MinGW-5.1.4.1...redirect

Downloading MinGW-5.1.4.1...failed 401 Authorization Required

ppm.bat install failed: 401 Authorization Required

It looks like the installation of dmake and MinGW has failed.  You will not be

able to run Makefile commands or compile C extension code.  Please check your

internet connection and your proxy settings!

Checking if your kit is complete...

Looks good

Writing Makefile for Crypt::RC4

'nmake' 不是内部或外部命令，也不是可运行的程序

或批处理文件。

SIFUKURT/Crypt-RC4-2.02.tar.gz

nmake -- NOT OK

Running make test

Can't test without successful make

Running make install

Make had returned bad status, install seems impossible

Running install for module 'IO::Scalar'

Running make for D/DS/DSKOLL/IO-stringy-2.110.tar.gz

Checksum for C:\Perl\cpan\sources\authors\id\D\DS\DSKOLL\IO-stringy-2.110.tar.gz

ok

IO-stringy-2.110/

IO-stringy-2.110/examples/

IO-stringy-2.110/examples/IO_Scalar_synopsis

IO-stringy-2.110/lib/

IO-stringy-2.110/lib/IO/

IO-stringy-2.110/lib/IO/Stringy.pm

IO-stringy-2.110/lib/IO/AtomicFile.pm

IO-stringy-2.110/lib/IO/Scalar.pm

IO-stringy-2.110/lib/IO/WrapTie.pm

IO-stringy-2.110/lib/IO/Lines.pm

IO-stringy-2.110/lib/IO/ScalarArray.pm

IO-stringy-2.110/lib/IO/Wrap.pm

IO-stringy-2.110/lib/IO/InnerFile.pm

IO-stringy-2.110/t/

IO-stringy-2.110/t/two.t

IO-stringy-2.110/t/IO_ScalarArray.t

IO-stringy-2.110/t/simple.t

IO-stringy-2.110/t/ExtUtils/

IO-stringy-2.110/t/ExtUtils/TBone.pm

IO-stringy-2.110/t/Common.pm

IO-stringy-2.110/t/IO_Scalar.t

IO-stringy-2.110/t/IO_Lines.t

IO-stringy-2.110/t/IO_WrapTie.t

IO-stringy-2.110/COPYING

IO-stringy-2.110/contrib/

IO-stringy-2.110/contrib/Clever.pm

IO-stringy-2.110/MANIFEST

IO-stringy-2.110/META.yml

IO-stringy-2.110/README

IO-stringy-2.110/Makefile.PL

CPAN.pm: Going to build D/DS/DSKOLL/IO-stringy-2.110.tar.gz

gcc.exe: Extraneous argument to `--' option

gcc.exe: No input files specified.

Set up gcc environment -

It looks like you don't have a C compiler and make utility installed.  Trying

to install dmake and the MinGW gcc compiler using the Perl Package Manager.

This may take a a few minutes...

Downloading MinGW-5.1.4.1...redirect

Downloading MinGW-5.1.4.1...failed 401 Authorization Required

ppm.bat install failed: 401 Authorization Required

It looks like the installation of dmake and MinGW has failed.  You will not be

able to run Makefile commands or compile C extension code.  Please check your

internet connection and your proxy settings!

Checking if your kit is complete...

Looks good

Writing Makefile for IO::Stringy

'nmake' 不是内部或外部命令，也不是可运行的程序

或批处理文件。

DSKOLL/IO-stringy-2.110.tar.gz

nmake -- NOT OK

Running make test

Can't test without successful make

Running make install

Make had returned bad status, install seems impossible

Running install for module 'OLE::Storage_Lite'

Running make for J/JM/JMCNAMARA/OLE-Storage_Lite-0.19.tar.gz

Checksum for C:\Perl\cpan\sources\authors\id\J\JM\JMCNAMARA\OLE-Storage_Lite-0.1

9.tar.gz ok

OLE-Storage_Lite-0.19/

OLE-Storage_Lite-0.19/Changes

OLE-Storage_Lite-0.19/lib/

OLE-Storage_Lite-0.19/Makefile.PL

OLE-Storage_Lite-0.19/MANIFEST

OLE-Storage_Lite-0.19/META.yml

OLE-Storage_Lite-0.19/README

OLE-Storage_Lite-0.19/sample/

OLE-Storage_Lite-0.19/t/

OLE-Storage_Lite-0.19/t/00_load.t

OLE-Storage_Lite-0.19/t/01_date_conversion.t

OLE-Storage_Lite-0.19/sample/README

OLE-Storage_Lite-0.19/sample/smpadd.pl

OLE-Storage_Lite-0.19/sample/smpadd_a.pl

OLE-Storage_Lite-0.19/sample/smpaddF.pl

OLE-Storage_Lite-0.19/sample/smplls.pl

OLE-Storage_Lite-0.19/sample/smplls_a.pl

OLE-Storage_Lite-0.19/sample/smpsv.pl

OLE-Storage_Lite-0.19/sample/test.xls

OLE-Storage_Lite-0.19/lib/OLE/

OLE-Storage_Lite-0.19/lib/OLE/Storage_Lite.pm

CPAN.pm: Going to build J/JM/JMCNAMARA/OLE-Storage_Lite-0.19.tar.gz

gcc.exe: Extraneous argument to `--' option

gcc.exe: No input files specified.

Set up gcc environment -

It looks like you don't have a C compiler and make utility installed.  Trying

to install dmake and the MinGW gcc compiler using the Perl Package Manager.

This may take a a few minutes...

Downloading MinGW-5.1.4.1...redirect

Downloading MinGW-5.1.4.1...failed 401 Authorization Required

ppm.bat install failed: 401 Authorization Required

It looks like the installation of dmake and MinGW has failed.  You will not be

able to run Makefile commands or compile C extension code.  Please check your

internet connection and your proxy settings!

Checking if your kit is complete...

Looks good

Writing Makefile for OLE::Storage_Lite

'nmake' 不是内部或外部命令，也不是可运行的程序

或批处理文件。

JMCNAMARA/OLE-Storage_Lite-0.19.tar.gz

nmake -- NOT OK

Running make test

Can't test without successful make

Running make install

Make had returned bad status, install seems impossible

Running install for module 'Digest::Perl::MD5'

Running make for D/DE/DELTA/Digest-Perl-MD5-1.8.tar.gz

Checksum for C:\Perl\cpan\sources\authors\id\D\DE\DELTA\Digest-Perl-MD5-1.8.tar.

gz ok

Digest-Perl-MD5-1.8/

Digest-Perl-MD5-1.8/CHANGES

Digest-Perl-MD5-1.8/tools/

Digest-Perl-MD5-1.8/tools/md5-bench.pl

Digest-Perl-MD5-1.8/tools/md5

Digest-Perl-MD5-1.8/tools/md5-test.pl

Digest-Perl-MD5-1.8/META.yml

Digest-Perl-MD5-1.8/test.pl

Digest-Perl-MD5-1.8/lib/

Digest-Perl-MD5-1.8/lib/Digest/

Digest-Perl-MD5-1.8/lib/Digest/Perl/

Digest-Perl-MD5-1.8/lib/Digest/Perl/MD5.pm

Digest-Perl-MD5-1.8/MANIFEST

Digest-Perl-MD5-1.8/INSTALL

Digest-Perl-MD5-1.8/rand.f

Digest-Perl-MD5-1.8/Makefile.PL

Digest-Perl-MD5-1.8/README

CPAN.pm: Going to build D/DE/DELTA/Digest-Perl-MD5-1.8.tar.gz

gcc.exe: Extraneous argument to `--' option

gcc.exe: No input files specified.

Set up gcc environment -

It looks like you don't have a C compiler and make utility installed.  Trying

to install dmake and the MinGW gcc compiler using the Perl Package Manager.

This may take a a few minutes...

Downloading MinGW-5.1.4.1...redirect

Downloading MinGW-5.1.4.1...failed 401 Authorization Required

ppm.bat install failed: 401 Authorization Required

It looks like the installation of dmake and MinGW has failed.  You will not be

able to run Makefile commands or compile C extension code.  Please check your

internet connection and your proxy settings!

Checking if your kit is complete...

Looks good

Writing Makefile for Digest::Perl::MD5

'nmake' 不是内部或外部命令，也不是可运行的程序

或批处理文件。

DELTA/Digest-Perl-MD5-1.8.tar.gz

nmake -- NOT OK

Running make test

Can't test without successful make

Running make install

Make had returned bad status, install seems impossible

Running make for J/JM/JMCNAMARA/Spreadsheet-ParseExcel-0.59.tar.gz

Has already been unwrapped into directory C:\Perl\cpan\build\Spreadsheet-Parse

Excel-0.59-XIt6D5

CPAN.pm: Going to build J/JM/JMCNAMARA/Spreadsheet-ParseExcel-0.59.tar.gz

Warning: Prerequisite 'Crypt::RC4 => 0' for 'JMCNAMARA/Spreadsheet-ParseExcel-0.

59.tar.gz' failed when processing 'SIFUKURT/Crypt-RC4-2.02.tar.gz' with 'make =>

NO'. Continuing, but chances to succeed are limited.

Warning: Prerequisite 'IO::Scalar => 0' for 'JMCNAMARA/Spreadsheet-ParseExcel-0.

59.tar.gz' failed when processing 'DSKOLL/IO-stringy-2.110.tar.gz' with 'make =>

NO'. Continuing, but chances to succeed are limited.

Warning: Prerequisite 'OLE::Storage_Lite => 0.19' for 'JMCNAMARA/Spreadsheet-Par

seExcel-0.59.tar.gz' failed when processing 'JMCNAMARA/OLE-Storage_Lite-0.19.tar

.gz' with 'make => NO'. Continuing, but chances to succeed are limited.

Warning: Prerequisite 'Digest::Perl::MD5 => 0' for 'JMCNAMARA/Spreadsheet-ParseE

xcel-0.59.tar.gz' failed when processing 'DELTA/Digest-Perl-MD5-1.8.tar.gz' with

'make => NO'. Continuing, but chances to succeed are limited.

'nmake' 不是内部或外部命令，也不是可运行的程序

或批处理文件。

JMCNAMARA/Spreadsheet-ParseExcel-0.59.tar.gz

nmake -- NOT OK

Running make test

Can't test without successful make

Running make install

Make had returned bad status, install seems impossible

请那位高手告诉一下，如何解决，万分感谢，如不能自动安装，如何手动安装。