车载以太网 - 1000Base-T1 SPY Mini

1000Base-T1 SPY Mini——能捕获1路1000Base-T1通信

Description描述

The 1000BASE-T1 SPY mini is the first device to allow the direct capture of 1000BASE-T1 (Automotive Gigabit Ethernet) traffic with optional timestamping with 40 ns resolution to Standard Gigabit Ethernet.
1000BASE-T1 SPY mini是第一款允许直接捕获1000BASE-T1（汽车千兆以太网）流量的设备，可选择时间戳，标准千兆以太网分辨率为40 ns。

A clock synchronization with the 100BASE-T1 SPY 12 port is provided via internal 802.1AS implementation.
通过内部802.1AS实现提供与100BASE-T1 SPY 12端口的时钟同步。

In logging mode the data Frames can be enhanced with additional information: the exact timestamp with 0.04 µs resolution and the bus port the data was originally received on. All data can be recorded on a PC or datalogger for detailed offline analysis.
在记录模式下，可以使用附加信息增强数据帧：具有0.04μs分辨率的精确时间戳和最初接收数据的总线端口。 所有数据都可以记录在PC或数据记录器上，以便进行详细的分析。

Different SPY modes are allowed:
允许不同的SPY模式：

1.Copying each direction of 1000BASE-T1 Traffic to one independent RJ45 interface
将1000BASE-T1 Traf fic的每个方向复制到一个独立的RJ45接口

2.Allowing copy of both directions of 1000BASE-T1 Traffic to only one RJ45 interface, assuming less than 500Mbps traffic bandwidth in each direction.
允许将1000BASE-T1 Traf fic的两个方向复制到一个RJ45接口，假设每个方向的流量带宽小于500Mbps。

3.Use as Dual Media Converter.
用作两个媒体转换器。

Features特点

• 2 x 1000BASE-T1 Ports
  2个1000BASE-T1端口
• 2x Gigabit Ethernet Ports
  2个千兆以太网端口
• Timestamp with 0.04 µs resolution selectable
  可选择0.04μs分辨率的时间戳
• Can be synchronized via 802.1AS with other devices, such as 100BASE-T1 SPY 12 Port
  可以通过802.1AS与其他设备同步，例如100BASE-T1 SPY 12端口
• 6x 3V3 Bidirectional Trigger signals
  6x 3V3双向触发信号
• DIP switches for easy configuration
  DIP开关，易于配置
• Robust steel case
  坚固的钢壳
• Power requirements: 12 Volt DC Nominal (8-16 Volts), 4 to 7 Watt
  功率要求：12伏直流标称（8-16伏），4至7瓦
• Size: 120x118x28 mm
  尺寸：120x118x28毫米