Any mining equipment need maintenance and refurbishment, only in this way, can we guarantee the efficiency and capacity of the equipment, and ensure the life of the equipment. Cement rotary kiln is also true, the following is the cement rotary kiln maintenance requirements and conditions:
(1) Cement kiln maintenance including playing kiln, coating demolished brick, cleaning and masonry. in order to shorten the time of the stopping kiln, we can carry out the play kiln coating and demolition brick after the rotary kiln cooling 10-12 hours , at this time, the kiln temperature will still be above 90oC, therefore; the play skin kiln and bricks are conducted in the high temperature and high dust environment.
(2) Based on common sense, we generally do not want to use diesel driven equipment under conditions of high temperature and high dust, high temperature, because the diesel engine are not resistant to high temperature, and high dust will paste dead air filter and radiator, which resulting in failure-prone, and impact hit brick operations.
(3) Affected by the kiln door size, the bridge is generally narrow, operator and machine should not separate when the machine passes the bridge. Driving a small excavator caused people and vehicles fall into the the grate cooler these vicious accidents have been reported at home and abroad.
(4) The demolition of brick and hit kiln skin are all carried out through hydraulic breaker crushing , the Broken slag splashing jumpping and kilns leather slump are inevitable. so in order to prevent the occurrence of safety incidents, The operator should be away from the work surface, don't sit on the machine all the time and don't move.
(5) In order to enter the smaller kiln door, and do not want conduct the additional transformation to the the kiln hood , it is required that play brick machine's width and height are smaller, the weight is lighter. Meanwhile, the hydraulic impact hammer power should be large, for completing the job quickly, the most important is that this machine can play the moving kiln head castable materials.
(6) Demolished brick can play the kiln leather demolished brick quickly, but can not damage the cylinder. This requires the hydraulic hammer impact energy and frequency kiln performs well.
(7) When designing the machine , we must take the case of high temperature and high dust reliable operation into account , so the failure rate should be low, the use of cost should be low.
jaw crusher supplier : http://www.ore-mills.com/jaw-crusher.html
Dryer machine : http://www.crusher-export.com/dryer.htm
Sand washer : http://www.mine-crusher.com/sandwasher.htm
dryer machine : http://www.ore-mills.com/