Kubernetes clusters for the hobbyist

This guide answers the question of how to setup and operate a fully functional, secure Kubernetes cluster on a cloud provider such as Hetzner Cloud, DigitalOcean or Scaleway. It explains how to overcome the lack of external ingress controllers, fully isolated secure private networking and persistent distributed block storage.

Be aware, that the following sections might be opinionated. Kubernetes is an evolving, fast paced environment, which means this guide will probably be outdated at times, depending on the author's spare time and individual contributions. Due to this fact contributions are highly appreciated.

This guide is accompanied by a fully automated cluster setup solution in the shape of well structured, modular Terraform recipes. Links to contextually related modules are spread throughout the guide, visually highlighted using the Terraform icon.

If you find this project helpful, please consider supporting its future development on GitHub Sponsors.

Table of Contents

• Cluster size
• Choosing a cloud provider
• Choosing an operating system
• Security
  • Firewall
  • Secure private networking
  • WireGuard setup
• Installing Kubernetes
  • Docker setup
  • Etcd setup
  • Kubernetes setup
    • Initializing the master node
    • Joining the cluster nodes
• Access and operations
  • Role-Based Access Control
  • Deploying services
• Bringing traffic to the cluster
  • Ingress controller setup
  • DNS records
  • Obtaining SSL/TLS certificates
  • Deploying the Kubernetes Dashboard
• Distributed block storage
  • Persistent volumes
  • Choosing a solution
  • Deploying Rook
  • Consuming storage
• Where to go from here

Cluster size

The professional hobbyist cluster operators aim for resilience—a system's ability to withstand and recover from failure. On the other hand, they usually have a limited amount of funds they can or want to spend on a basic cluster. It's therefore crucial to find a good balance between resilience and cost.

After experimenting with various setups and configurations a good reference point is, that a basic cluster can be operated on as little as two virtual hosts with 1GB memory each. At this point it's worth mentioning that Kubernetes does not include swap memory in its calculations and will evict pods pretty brutally when reaching memory limits (reference). As opposed to memory, raw CPU power doesn't matter that much, although it should be clear that the next Facebook won't be running on two virtual CPU cores.

For a Kubernetes cluster to be resilient it's recommended that it consists of at least three hosts. The main reason behind this is that etcd, which itself is an essential part of any Kubernetes setup, is only fault tolerant with a minimum of three cluster members (reference).

Choosing a cloud provider

provider/hcloud provider/digitalocean provider/scaleway

At this point it's time to choose a cloud provider based on a few criteria such as trustworthiness, reliability, pricing and data center location. The very best offer at this time is definitely from Hetzner Cloud (referral link, get €20), where one gets a suitable three node cluster up and running for around €9/month (3x2GB). Hetzner currently only operate data centers located in Europe.

DigitalOcean (referral link, get $100) is known for their great support and having data centers around the globe which is definitely a plus. A three node cluster will cost $15/month (3x1GB).

Scaleway's instances start at €4.99 (previously €2.99). A three node cluster will cost around €15/month (3x2GB).

Linode, Vultr and a couple of other providers with similar offers are other viable options. While they all have their advantages and disadvantages, they should be perfectly fine for hosting a Kubernetes cluster.

Choosing an operating system

While Linux comes in many flavors, Ubuntu (LTS) is the distribution of choice for hosting our cluster. This may seem opinionated—and it is—but then again, Ubuntu has always been a first class citizen in the Kubernetes ecosystem.

CoreOS would be a great option as well, because of how it embraces the use of containers. On the other hand, not everything we might need in the future is readily available. Some essential packages are likely to be missing at this point, or at least there's no support for running them outside of containers.

That being said, feel free to use any Linux distribution you like. Just be aware that some of the sections in this guide may differ substantially depending on your chosen operating system.

Security

Securing hosts on both public and private interfaces is an absolute necessity.

This is a tough one. Almost every single guide fails to bring the security topic to the table to the extent it deserves. One of the biggest misconceptions is that private networks are secure, but private does not mean secure. In fact, private networks are more often than not shared between many customers in the same data center. This might not be the case with all providers. It's generally good advise to gain absolute certainty, what the actual conditions of a private network are.

Firewall

security/ufw

While there are definitely some people out there able to configure iptables reliably, the average mortal will cringe when glancing at the syntax of the most basic rules. Luckily, there are more approachable solutions out there. One of those is UFW, the uncomplicated firewall—a human friendly command line interface offering simple abstractions for managing complex iptables rules.

Assuming the secure public Kubernetes API runs on port 6443, SSH daemon on 22, plus 80 and 443 for serving web traffic, results in the following basic UFW configuration:

ufw allow ssh # sshd on port 22, be careful to not get locked out!
ufw allow 6443 # remote, secure Kubernetes API access
ufw allow 80
ufw allow 443
ufw default deny incoming # deny traffic on every other port, on any interface
ufw enable

This ruleset will get slightly expanded in the upcoming sections.

Secure private networking

Kubernetes cluster members constantly exchange data with each other. A secure network overlay between hosts is not only the simplest, but also the most secure solution for making sure that a third party occupying the same network as our hosts won't be able to eavesdrop on their private traffic. It's a tedious job to secure every single service, as this task usually requires creating and distributing certificates across hosts, managing secrets in one way or another and, last but not least, configuring services to actually use encrypted means of communication. That's why setting up a network overlay using VPN—which itself is a one-time effort requiring very little know how, and which naturally ensures secure inter-host communication for every possible service running now and in the future—is simply the best solution to address this problem.

When talking about VPN, there are generally two types of solutions:

• Traditional VPN services, running in userland, typically providing a tunnel interface
• IPsec, which is part of the Kernel and enables authentication and encryption on any existing interface

VPN software running in userland has in general a huge negative impact on network throughput as opposed to IPsec, which is much faster. Unfortunately, it's quite a challenge to understand how the latter works. strongSwan is certainly one of the more approachable solutions, but setting it up for even the most basic needs is still accompanied by a steep learning curve.

Complexity is security's worst contender.

A project called WireGuard supplies the best of both worlds at this point. Running as a Kernel module, it not only offers excellent performance, but is dead simple to set up and provides a tunnel interface out of the box. It may be disputed whether running VPN within the Kernel is a good idea, but then again alternatives running in userland such as tinc or fastd aren't necessarily more secure. However, they are an order of magnitude slower and typically harder to configure.

WireGuard setup

security/wireguard

Let's start off by installing WireGuard. Follow the instructions found here: WireGuard Installation.

apt install wireguard

Once WireGuard has been installed, it's time to create the configuration files. Each host should connect to its peers to create a secure network overlay via a tunnel interface called wg0. Let's assume the setup consists of three hosts and each one will get a new VPN IP address in the 10.0.1.1/24 range:

Please note that Hetzner Cloud doesn't provide a private network interface, but it's perfectly fine to run WireGuard on the public interface. Just make sure to use the public IP addresses and the public network interface (eth0).

In this scenario, a configuration file for kube1 would look like this:

# /etc/wireguard/wg0.conf
[Interface]
Address = 10.0.1.1
PrivateKey = <PRIVATE_KEY_KUBE1>
ListenPort = 51820

[Peer]
PublicKey = <PUBLIC_KEY_KUBE2>
AllowedIps = 10.0.1.2/32
Endpoint = 10.8.23.94:51820

[Peer]
PublicKey = <PUBLIC_KEY_KUBE3>
AllowedIps = 10.0.1.3/32
Endpoint = 10.8.23.95:51820

To simplify the creation of private and public keys, the following command can be used to generate and print the necessary key-pairs:

for i in 1 2 3; do
  private_key=$(wg genkey)
  public_key=$(echo $private_key | wg pubkey)
  echo "Host $i private key: $private_key"
  echo "Host $i public key:  $public_key"
done

After creating a file named /etc/wireguard/wg0.conf on each host containing the correct IP addresses and public and private keys, configuration is basically done.

What's left is to add the following firewall rules:

# open VPN port on private network interface (use eth0 on Hetzner Cloud)
ufw allow in on eth1 to any port 51820
# allow all traffic on VPN tunnel interface
ufw allow in on wg0
ufw reload

Before starting WireGuard we need to make sure that ip forwarding is enabled. Executing sysctl net.ipv4.ip_forward should show net.ipv4.ip_forward = 1. If this is not the case, run the following commands:

echo "net.ipv4.ip_forward=1" >> /etc/sysctl.conf # enable ip4 forwarding
sysctl -p # apply settings from /etc/sysctl.conf

Executing the command systemctl start wg-quick@wg0 on each host will start the VPN service and, if everything is configured correctly, the hosts should be able to establish connections between each other. Traffic can now be routed securely using the VPN IP addresses (10.0.1.1–10.0.1.3).

In order to check whether the connections are established successfully, wg show comes in handy:

$ wg show
interface: wg0
  public key: 5xKk9...
  private key: (hidden)
  listening port: 51820

peer: HBCwy...
  endpoint: 10.8.23.199:51820
  allowed ips: 10.0.1.1/32
  latest handshake: 25 seconds ago
  transfer: 8.76 GiB received, 25.46 GiB sent

peer: KaRMh...
  endpoint: 10.8.47.93:51820
  allowed ips: 10.0.1.3/32
  latest handshake: 59 seconds ago
  transfer: 41.86 GiB received, 25.09 GiB sent

Last but not least, run systemctl enable wg-quick@wg0 to launch the service whenever the system boots.

Installing Kubernetes

service/kubernetes

There are plenty of ways to set up a Kubernetes cluster from scratch. At this point however, we settle on kubeadm. This dramatically simplifies the setup process by automating the creation of certificates, services and configuration files.

Before getting started with Kubernetes itself, we need to take care of setting up two essential services that are not part of the actual stack, namely Docker and etcd.

Docker setup

Docker is directly available from the package registries of most Linux distributions. Hints regarding supported versions are available in the official kubeadm guide. Simply use your preferred way of installation. Running apt-get install docker.io on Ubuntu will install a stable version, although not the most recent one, but this is perfectly fine in our case.

Kubernetes recommends running Docker with Iptables and IP Masq disabled. The easiest way to achieve this is by creating a systemd unit file to set the required configuration flags:

# /etc/systemd/system/docker.service.d/10-docker-opts.conf
Environment="DOCKER_OPTS=--iptables=false --ip-masq=false"

If this file has been placed after Docker was installed, make sure to restart the service using systemctl restart docker.

Etcd setup

service/etcd

etcd is a highly-available key value store, which Kubernetes uses for persistent storage of all of its REST API objects. It is therefore a crucial part of the cluster. kubeadm would normally install etcd on a single node. Depending on the number of hosts available, it would be rather stupid not to run etcd in cluster mode. As mentioned earlier, it makes sense to run at least a three node cluster due to the fact that etcd is fault tolerant only from this size on.

Even though etcd is generally available with most package managers, it's recommended to manually install a more recent version:

export ETCD_VERSION="v3.3.12"
mkdir -p /opt/etcd
curl -L https://storage.googleapis.com/etcd/${ETCD_VERSION}/etcd-${ETCD_VERSION}-linux-amd64.tar.gz \
  -o /opt/etcd-${ETCD_VERSION}-linux-amd64.tar.gz
tar xzvf /opt/etcd-${ETCD_VERSION}-linux-amd64.tar.gz -C /opt/etcd --strip-components=1

In an insecure environment configuring etcd typically involves creating and distributing certificates across nodes, whereas running it within a secure network makes this process a whole lot easier. There's simply no need to make use of additional security layers as long as the service is bound to an end-to-end secured VPN interface.

This section is not going to explain etcd configuration in depth, refer to the official documentation instead. All that needs to be done is creating a systemd unit file on each host. Assuming a three node cluster, the configuration for kube1 would look like this:

# /etc/systemd/system/etcd.service
[Unit]
Description=etcd
After=network.target wg-quick@wg0.service

[Service]
Type=notify
ExecStart=/opt/etcd/etcd --name kube1 \
  --data-dir /var/lib/etcd \
  --listen-client-urls "http://10.0.1.1:2379,http://localhost:2379" \
  --advertise-client-urls "http://10.0.1.1:2379" \
  --listen-peer-urls "http://10.0.1.1:2380" \
  --initial-cluster "kube1=http://10.0.1.1:2380,kube2=http://10.0.1.2:2380,kube3=http://10.0.1.3:2380" \
  --initial-advertise-peer-urls "http://10.0.1.1:2380" \
  --heartbeat-interval 200 \
  --election-timeout 5000
Restart=always
RestartSec=5
TimeoutStartSec=0
StartLimitInterval=0

[Install]
WantedBy=multi-user.target

It's important to understand that each flag starting with --initial does only apply during the first launch of a cluster. This means for example, that it's possible to add and remove cluster members at any time without ever changing the value of --initial-cluster.

After the files have been placed on each host, it's time to start the etcd cluster:

systemctl enable etcd.service # launch etcd during system boot
systemctl start etcd.service

Executing /opt/etcd/etcdctl member list should show a list of cluster members. If something went wrong check the logs using journalctl -u etcd.service.

Kubernetes setup

Now that Docker is configured and etcd is running, it's time to deploy Kubernetes. The first step is to install the required packages on each host:

curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | apt-key add -
cat <<EOF > /etc/apt/sources.list.d/kubernetes.list
deb http://apt.kubernetes.io/ kubernetes-xenial-unstable main
EOF
apt-get update
apt-get install -y kubelet kubeadm kubectl kubernetes-cni

Initializing the master node

Before initializing the master node, we need to create a manifest on kube1 which will then be used as configuration in the next step:

# /tmp/master-configuration.yml
apiVersion: kubeadm.k8s.io/v1beta2
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 10.0.1.1
  bindPort: 6443
---
apiVersion: kubeadm.k8s.io/v1beta2
kind: ClusterConfiguration
certificatesDir: /etc/kubernetes/pki
apiServer:
  certSANs:
  - <PUBLIC_IP_KUBE1>
etcd:
  external:
    endpoints:
      - http://10.0.1.1:2379
      - http://10.0.1.2:2379
      - http://10.0.1.3:2379
---
apiVersion: kubelet.config.k8s.io/v1beta2
kind: KubeletConfiguration
failSwapOn: false

Then we run the following command on kube1:

kubeadm init --config /tmp/master-configuration.yml --ignore-preflight-errors=Swap,NumCPU

After the setup is complete, kubeadm prints a token such as 818d5a.8b50eb5477ba4f40. It's important to write it down, we'll need it in a minute to join the other cluster nodes.

Kubernetes is built around openness, so it's up to us to choose and install a suitable pod network. This is required as it enables pods running on different nodes to communicate with each other. One of the many options is Weave Net. It requires zero configuration and is considered stable and well-maintained:

# create symlink for the current user in order to gain access to the API server with kubectl
[ -d $HOME/.kube ] || mkdir -p $HOME/.kube
ln -s /etc/kubernetes/admin.conf $HOME/.kube/config

# install Weave Net
kubectl apply -f "https://cloud.weave.works/k8s/net?k8s-version=$(kubectl version | base64 | tr -d '\n')"

# allow traffic on the newly created weave network interface
ufw allow in on weave
ufw reload

Unfortunately, Weave Net will not readily work with our current cluster configuration because traffic will be routed via the wrong network interface. This can be fixed by running the following command on each host:

ip route add 10.96.0.0/16 dev $VPN_INTERFACE src $VPN_IP

# on kube1:
ip route add 10.96.0.0/16 dev wg0 src 10.0.1.1
# on kube2:
ip route add 10.96.0.0/16 dev wg0 src 10.0.1.2
# on kube3:
ip route add 10.96.0.0/16 dev wg0 src 10.0.1.3

The added route will not survive a reboot as it is not persistent. To ensure that the route gets added after a reboot, we have to add a systemd service unit on each node which will wait for the WireGuard interface to come up and after that adds the route. For kube1 it would look like this:

# /etc/systemd/system/overlay-route.service
[Unit]
Description=Overlay network route for WireGuard
After=wg-quick@wg0.service

[Service]
Type=oneshot
User=root
ExecStart=/sbin/ip route add 10.96.0.0/16 dev wg0 src 10.0.1.1

[Install]
WantedBy=multi-user.target

After that we have to enable it by running following command:

systemctl enable overlay-route.service

Joining the cluster nodes

All that's left is to join the cluster with the other nodes. Run the following command on each host:

kubeadm join --token=<TOKEN> 10.0.1.1:6443 \
  --discovery-token-unsafe-skip-ca-verification \
  --ignore-preflight-errors=Swap

That's it, a Kubernetes cluster is ready at our disposal.

Access and operations

service/kubernetes

As soon as the cluster is running, we want to be able to access the Kubernetes API remotely. This can be done by copying /etc/kubernetes/admin.conf from kube1 to your own machine. After installing kubectl locally, execute the following commands:

# create local config folder
mkdir -p ~/.kube
# backup old config if required
[ -f ~/.kube/config ] && cp ~/.kube/config ~/.kube/config.backup
# copy config from master node
scp root@<PUBLIC_IP_KUBE1>:/etc/kubernetes/admin.conf ~/.kube/config
# change config to use correct IP address
kubectl config set-cluster kubernetes --server=https://<PUBLIC_IP_KUBE1>:6443

You're now able to remotely access the Kubernetes API. Running kubectl get nodes should show a list of nodes similar to this:

NAME    STATUS   ROLES                  AGE     VERSION
kube1   Ready    control-plane,master   5h11m   v1.21.1
kube2   Ready    <none>                 5h11m   v1.21.1
kube3   Ready    <none>                 5h11m   v1.21.1

Role-Based Access Control

As of version 1.6, kubeadm configures Kubernetes with RBAC enabled. Because our hobby cluster is typically operated by trusted people, we should enable permissive RBAC permissions to be able to deploy any kind of services using any kind of resources. If you're in doubt whether this is secure enough for your use case, please refer to the official RBAC documentation.

kubectl create clusterrolebinding permissive-binding \
  --clusterrole=cluster-admin \
  --user=admin \
  --user=kubelet \
  --group=system:serviceaccounts

Deploying services

Services can now be deployed remotely by calling kubectl -f apply <FILE>. It's also possible to apply multiple files by pointing to a folder, for example:

$ ls dashboard/
deployment.yml  service.yml

$ kubectl apply -f dashboard/
deployment "kubernetes-dashboard" created
service "kubernetes-dashboard" created

This guide will make no further explanations in this regard. Please refer to the official documentation on kubernetes.io.

Bringing traffic to the cluster

There are downsides to running Kubernetes outside of well integrated platforms such as AWS or GCE. One of those is the lack of external ingress and load balancing solutions. Fortunately, it's fairly easy to get an NGINX powered ingress controller running inside the cluster, which will enable services to register for receiving public traffic.

Ingress controller setup

Because there's no load balancer available with most cloud providers, we have to make sure the NGINX server is always running on the same host, accessible via an IP address that doesn't change. As our master node is pretty much idle at this point, and no ordinary pods will get scheduled on it, we make kube1 our dedicated host for routing public traffic.

We already opened port 80 and 443 during the initial firewall configuration, now all we have to do is to write a couple of manifests to deploy the NGINX ingress controller on kube1:

• ingress/00-namespace.yml
• ingress/deployment.yml
• ingress/service.yml
• ingress/configmap.yml

One part requires special attention. In order to make sure NGINX runs on kube1—which is a tainted master node and no pods will normally be scheduled on it—we need to specify a toleration:

# from ingress/deployment.yml
tolerations:
- key: node-role.kubernetes.io/master
  operator: Equal
  effect: NoSchedule

Specifying a toleration doesn't make sure that a pod is getting scheduled on any specific node. For this we need to add a node affinity rule. As we have just a single master node, the following specification is enough to schedule a pod on kube1:

# from ingress/deployment.yml
affinity:
  nodeAffinity:
    requiredDuringSchedulingIgnoredDuringExecution:
      nodeSelectorTerms:
      - matchExpressions:
        - key: node-role.kubernetes.io/master
          operator: Exists

Running kubectl apply -f ingress/ will apply all manifests in this folder. First, a namespace called ingress is created, followed by the NGINX deployment, plus a default backend to serve 404 pages for undefined domains and routes including the necessary service object. There's no need to define a service object for NGINX itself, because we configure it to use the host network (hostNetwork: true), which means that the container is bound to the actual ports on the host, not to some virtual interface within the pod overlay network.

Services are now able to make use of the ingress controller and receive public traffic with a simple manifest:

apiVersion: extensions/v1beta1
kind: Ingress
metadata:
  name: example-ingress
  annotations:
    kubernetes.io/ingress.class: "nginx"
spec:
  rules:
  - host: service.example.com
    http:
      paths:
      - path: /
        backend:
          serviceName: example-service
          servicePort: http

The NGINX ingress controller is quite flexible and supports a whole bunch of configuration options.

DNS records

dns/cloudflare dns/google dns/aws dns/digitalocean

At this point we could use a domain name and put some DNS entries into place. To serve web traffic it's enough to create an A record pointing to the public IP address of kube1 plus a wildcard entry to be able to use subdomains:

Once the DNS entries are propagated our example service would be accessible at http://service.example.com. If you don't have a domain name at hand, you can always add an entry to your hosts file instead.

Additionally, it might be a good idea to assign a subdomain to each host, e.g. kube1.example.com. It's way more comfortable to ssh into a host using a domain name instead of an IP address.

Obtaining SSL/TLS certificates

Thanks to Let’s Encrypt and a project called cert-manager it's incredibly easy to obtain free certificates for any domain name pointing at our Kubernetes cluster. Setting this service up takes no time and it plays well with the NGINX ingress controller we deployed earlier. These are the related manifests:

• ingress/tls/00-cert-manager.yml
• ingress/tls/cert-issuer.yml

Before deploying cert-manager using the manifests above, make sure to replace the email address in ingress/tls/cert-issuer.yml with your own.

To enable certificates for a service, the ingress manifest needs to be slightly extended:

apiVersion: extensions/v1beta1
kind: Ingress
metadata:
  name: example-ingress
  annotations:
    kubernetes.io/tls-acme: "true" # enable certificates
    kubernetes.io/ingress.class: "nginx"
spec:
  tls: # specify domains to fetch certificates for
  - hosts:
    - service.example.com
    secretName: example-service-tls
  rules:
  - host: service.example.com
    http:
      paths:
      - path: /
        backend:
          serviceName: example-service
          servicePort: http

After applying this manifest, cert-manager will try to obtain a certificate for service.example.com and reload the NGINX configuration to enable TLS. Make sure to check the logs of the cert-manager pod if something goes wrong.

NGINX will automatically redirect clients to HTTPS whenever TLS is enabled. In case you still want to serve traffic on HTTP, add nginx.ingress.kubernetes.io/ssl-redirect: "false" to the list of annotations.

Deploying the Kubernetes Dashboard

Now that everything is in place, we are able to expose services on specific domains and automatically obtain certificates for them. Let's try this out by deploying the Kubernetes Dashboard with the following manifests:

• dashboard/deployment.yml
• dashboard/service.yml
• dashboard/ingress.yml
• dashboard/secret.yml

Optionally, the following manifests can be used to get resource utilization graphs within the dashboard using metrics-server:

• dashboard/metrics-server/deployment.yml
• dashboard/metrics-server/service.yml
• dashboard/metrics-server/apiservice.yml

What's new here is that we enable basic authentication to restrict access to the dashboard. The following annotations are supported by the NGINX ingress controller, and may or may not work with other solutions:

# from dashboard/ingress.yml
annotations:
  # ...
  nginx.ingress.kubernetes.io/auth-type: basic
  nginx.ingress.kubernetes.io/auth-secret: kubernetes-dashboard-auth
  nginx.ingress.kubernetes.io/auth-realm: "Authentication Required"

# dashboard/secret.yml
apiVersion: v1
kind: Secret
metadata:
  name: kubernetes-dashboard-auth
  namespace: kube-system
data:
  auth: YWRtaW46JGFwcjEkV3hBNGpmQmkkTHYubS9PdzV5Y1RFMXMxMWNMYmJpLw==
type: Opaque

This example will prompt a visitor to enter their credentials (user: admin / password: test) when accessing the dashboard. Secrets for basic authentication can be created using htpasswd, and need to be added to the manifest as a base64 encoded string.

Distributed block storage

Data in containers is ephemeral, as soon as a pod gets stopped, crashes, or is for some reason rescheduled to run on another node, all its data is gone. While this is fine for static applications such as the Kubernetes Dashboard (which obtains its data from persistent sources running outside of the container), persisting data becomes a non-optional requirement as soon as we deploy databases on our cluster.

Kubernetes supports various types of volumes that can be attached to pods. Only a few of these match our requirements. There's the hostPath type which simply maps a path on the host to a path inside the container, but this won't work because we don't know on which node a pod will be scheduled.

Persistent volumes

There's a concept within Kubernetes of how to separate storage management from cluster management. To provide a layer of abstraction around storage there are two types of resources deeply integrated into Kubernetes, PersistentVolume and PersistentVolumeClaim. When running on well integrated platforms such as GCE, AWS or Azure, it's really easy to attach a persistent volume to a pod by creating a persistent volume claim. Unfortunately, we don't have access to such solutions.

Our cluster consists of multiple nodes and we need the ability to attach persistent volumes to any pod running on any node. There are a couple of projects and companies emerging around the idea of providing hyper-converged storage solutions. Some of their services are running as pods within Kubernetes itself, which is certainly the perfect way of managing storage on a small cluster such as ours.

Choosing a solution

Currently there are a couple of interesting solutions matching our criteria, but they all have their downsides:

• Rook.io is an open source project based on Ceph. Even though it's in an early stage, it offers good documentation and is quite flexible.
• gluster-kubernetes is an open source project built around GlusterFS and Heketi. Setup seems tedious at this point, requiring some kind of schema to be provided in JSON format.
• Portworx is a commercial project that offers a free variant of their proprietary software, providing great documentation and tooling.

Rook and Portworx both shine with a simple setup and transparent operations. Rook is our preferred choice because it offers a little more flexibility and is open source in contrast to Portworx, even though the latter wins in simplicity by launching just a single pod per instance.

Deploying Rook

As we run only a three node cluster, we're going to deploy Rook on all three of them by adding a master toleration to the Rook cluster definition.

Before deploying Rook we need to either provide a raw, unformatted block device or specify a directory that will be used for storage on each host. On a typical Ubuntu installation, the volume on which the operating system is installed is called /dev/vda. Attaching another volume will be available as /dev/vdb.

Make sure to edit the cluster manifest as shown below and choose the right configuration depending on whether you want to use a directory or a block device available in your environment for storage:

# storage/cluster.yml
  # ...
  storage:
    useAllNodes: true
    useAllDevices: false
    storeConfig:
      databaseSizeMB: 1024
      journalSizeMB: 1024
    # Uncomment the following line and replace it with the name of block device used for storage:
    #deviceFilter: vdb
    # Uncomment the following lines when using a directory for storage:
    #directories:
    #- path: /storage/data

As mentioned earlier, Rook is using Ceph under the hood. Run apt-get install ceph-common on each host to install the Ceph common utilities. Afterwards, apply the storage manifests in the following order:

• storage/00-namespace.yml
• storage/operator.yml
• storage/cluster.yml (wait for the rook-ceph-mon pods to be deployed kubectl -n rook get pods before continuing)
• storage/storageclass.yml
• storage/tools.yml

It's worth mentioning that the storageclass manifest contains the configuration for the replication factor:

# storage/storageclass.yml
apiVersion: ceph.rook.io/v1
kind: CephBlockPool
metadata:
  name: replicapool
  namespace: rook
spec:
  failureDomain: host
  replicated:
    size: 2 # replication factor
---
# ...

In order to operate on the storage cluster simply run commands within the Rook tools pod, such as:

# show ceph status
kubectl -n rook exec -it rook-tools -- ceph status

# show volumes
kubectl -n rook exec -it rook-tools -- rbd list replicapool

# show volume information
kubectl -n rook exec -it rook-tools -- rbd info replicapool/<volume>

Further commands are listed in the Rook Tools documentation.

Consuming storage

The storage class we created can be consumed with a persistent volume claim:

# minio/pvc.yml
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: minio-persistent-storage
spec:
  storageClassName: rook-block
  accessModes:
  - ReadWriteOnce
  resources:
    requests:
      storage: 5Gi

This will create a volume called minio-persistent-storage with 5GB storage capacity.

In this example we're deploying Minio, an Amazon S3 compatible object storage server, to create and mount a persistent volume:

• minio/deployment.yml
• minio/ingress.yml
• minio/secret.yml (MINIO_ACCESS_KEY: admin / MINIO_SECRET_KEY: admin.minio.secret.key)
• minio/service.yml
• minio/pvc.yml

The volume related configuration is buried in the deployment manifest:

# from minio/deployment.yml
containers:
- name: minio
  volumeMounts:
  - name: data
    mountPath: /data
# ...
volumes:
- name: data
  persistentVolumeClaim:
    claimName: minio-persistent-storage

The minio-persistent-storage volume will live as long as the persistent volume claim is not deleted (e.g. kubectl delete -f minio/pvc.yml ). The Minio pod itself can be deleted, updated or rescheduled without data loss.

Where to go from here

This was hopefully just the beginning of your journey. There are many more things to explore around Kubernetes. Feel free to leave feedback or raise questions at any time by opening an issue here.