环境准备
1、准备一台nginx服务器 ip192.168.1.133 端口81
安装过程:
#首先安装依赖: yum -y install gcc-c++ yum -y install pcre pcre-devel yum -y install zlib zlib-devel yum -y install openssl openssl—devel #注意 : 安装nginx必须使用 root 用户安装 #创建一个nginx目录 mkdir /usr/local/src/nginx #进入到nginx目录 cd /usr/local/src/nginx #下载或上传安装包 wget http://nginx.org/download/nginx.tar.gz 或 rz上传 #解压安装包 tar -xvf nginx.tar.gz #进入到解压后的目录 cd nginx # 下面 才开始正式安装 #把nginx安装到指定用户的目录 mkdir -p /ucenter/soft/nginx #安装配置 prefix为安装目录 user为用户 group为 组 ./configure --prefix=/ucenter/soft/nginx --user=ucenter --group=ucenter #编译 make #安装 make install #在linux系统中由于非root用户不能占用80端口,所以需要使普通用户以root身份启动nginx。 cd /ucenter/soft/nginx/sbin #把soft文件下所有的文件所属者修改为ucener -R 表示递归 chown ucenter:ucenter ./soft/ -R #修改 ./nginx 的所属为root chown root nginx #让普通用户可以使用80端口,可以使用root权限启用nginx chmod u+s nginx #修改配置文件 在修改配置文件之前 ,要备份该文件 cd conf/ # 要注意nginx 的工作进程,一般根据cpu的核数去修改 vim nginx.conf #关闭防火墙,打开80端口 service iptables stop #启动nginx ./nginx #重启nginx ./nginx -s reload #关闭nginx ./nginx -s stop
准备一台tomcat服务器,先准备java环境,安装jdk步骤省略
然后分别安装3个tomcat 服务器ip地址:192.168.1.143,tomcat1 8080端口,tomcat2 8081端口,tomcat3 8082端口。
apache-tomcat-7.0.64/conf/server.xml配置文件修改这三个地方,这样端口就不会冲突
<Server port="8005" shutdown="SHUTDOWN"> <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
修改tomcat ROOT目录下index.jsp,分别增加每个tomcat的标识,以及在页面上显示session ID
<%-- Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. --%> <!DOCTYPE html> <%@ page session="true" %> <% java.text.SimpleDateFormat sdf = new java.text.SimpleDateFormat("yyyy"); request.setAttribute("year", sdf.format(new java.util.Date())); request.setAttribute("tomcatUrl", "http://tomcat.apache.org/"); request.setAttribute("tomcatDocUrl", "/docs/"); request.setAttribute("tomcatExamplesUrl", "/examples/"); %> <html lang="en"> <head> <title><%=request.getServletContext().getServerInfo() %></title> <link href="favicon.ico" rel="icon" type="image/x-icon" /> <link href="favicon.ico" rel="shortcut icon" type="image/x-icon" /> <link href="tomcat.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="wrapper"> <div id="navigation" class="curved container"> <span id="nav-home"><a href="${tomcatUrl}">Home--<%=request.getSession().getId() %></a></span> <span id="nav-hosts"><a href="${tomcatDocUrl}">Documentation</a></span> <span id="nav-config"><a href="${tomcatDocUrl}config/">Configuration</a></span> <span id="nav-examples"><a href="${tomcatExamplesUrl}">Examples</a></span> <span id="nav-wiki"><a href="http://wiki.apache.org/tomcat/FrontPage">Wiki</a></span> <span id="nav-lists"><a href="${tomcatUrl}lists.html">Mailing Lists</a></span> <span id="nav-help"><a href="${tomcatUrl}findhelp.html">Find Help</a></span> <br class="separator" /> </div> <div id="asf-box"> <h1>${pageContext.servletContext.serverInfo}--8080</h1> </div> <div id="upper" class="curved container"> <div id="congrats" class="curved container"> <h2>If you're seeing this, you've successfully installed Tomcat. Congratulations!</h2> </div> <div id="notice"> <img src="tomcat.png" alt="[tomcat logo]" /> <div id="tasks"> <h3>Recommended Reading:</h3> <h4><a href="${tomcatDocUrl}security-howto.html">Security Considerations HOW-TO</a></h4> <h4><a href="${tomcatDocUrl}manager-howto.html">Manager Application HOW-TO</a></h4> <h4><a href="${tomcatDocUrl}cluster-howto.html">Clustering/Session Replication HOW-TO</a></h4> </div> </div> <div id="actions"> <div class="button"> <a class="container shadow" href="/manager/status"><span>Server Status</span></a> </div> <div class="button"> <a class="container shadow" href="/manager/html"><span>Manager App</span></a> </div> <div class="button"> <a class="container shadow" href="/host-manager/html"><span>Host Manager</span></a> </div> </div> <!-- <br class="separator" /> --> <br class="separator" /> </div> <div id="middle" class="curved container"> <h3>Developer Quick Start</h3> <div class="col25"> <div class="container"> <p><a href="${tomcatDocUrl}setup.html">Tomcat Setup</a></p> <p><a href="${tomcatDocUrl}appdev/">First Web Application</a></p> </div> </div> <div class="col25"> <div class="container"> <p><a href="${tomcatDocUrl}realm-howto.html">Realms & AAA</a></p> <p><a href="${tomcatDocUrl}jndi-datasource-examples-howto.html">JDBC DataSources</a></p> </div> </div> <div class="col25"> <div class="container"> <p><a href="${tomcatExamplesUrl}">Examples</a></p> </div> </div> <div class="col25"> <div class="container"> <p><a href="http://wiki.apache.org/tomcat/Specifications">Servlet Specifications</a></p> <p><a href="http://wiki.apache.org/tomcat/TomcatVersions">Tomcat Versions</a></p> </div> </div> <br class="separator" /> </div> <div id="lower"> <div id="low-manage" class=""> <div class="curved container"> <h3>Managing Tomcat</h3> <p>For security, access to the <a href="/manager/html">manager webapp</a> is restricted. Users are defined in:</p> <pre>$CATALINA_HOME/conf/tomcat-users.xml</pre> <p>In Tomcat 7.0 access to the manager application is split between different users. <a href="${tomcatDocUrl}manager-howto.html">Read more...</a></p> <br /> <h4><a href="${tomcatDocUrl}RELEASE-NOTES.txt">Release Notes</a></h4> <h4><a href="${tomcatDocUrl}changelog.html">Changelog</a></h4> <h4><a href="${tomcatUrl}migration.html">Migration Guide</a></h4> <h4><a href="${tomcatUrl}security.html">Security Notices</a></h4> </div> </div> <div id="low-docs" class=""> <div class="curved container"> <h3>Documentation</h3> <h4><a href="${tomcatDocUrl}">Tomcat 7.0 Documentation</a></h4> <h4><a href="${tomcatDocUrl}config/">Tomcat 7.0 Configuration</a></h4> <h4><a href="http://wiki.apache.org/tomcat/FrontPage">Tomcat Wiki</a></h4> <p>Find additional important configuration information in:</p> <pre>$CATALINA_HOME/RUNNING.txt</pre> <p>Developers may be interested in:</p> <ul> <li><a href="http://tomcat.apache.org/bugreport.html">Tomcat 7.0 Bug Database</a></li> <li><a href="${tomcatDocUrl}api/index.html">Tomcat 7.0 JavaDocs</a></li> <li><a href="http://svn.apache.org/repos/asf/tomcat/tc7.0.x/">Tomcat 7.0 SVN Repository</a></li> </ul> </div> </div> <div id="low-help" class=""> <div class="curved container"> <h3>Getting Help</h3> <h4><a href="${tomcatUrl}faq/">FAQ</a> and <a href="${tomcatUrl}lists.html">Mailing Lists</a></h4> <p>The following mailing lists are available:</p> <ul> <li id="list-announce"><strong><a href="${tomcatUrl}lists.html#tomcat-announce">tomcat-announce</a><br /> Important announcements, releases, security vulnerability notifications. (Low volume).</strong> </li> <li><a href="${tomcatUrl}lists.html#tomcat-users">tomcat-users</a><br /> User support and discussion </li> <li><a href="${tomcatUrl}lists.html#taglibs-user">taglibs-user</a><br /> User support and discussion for <a href="${tomcatUrl}taglibs/">Apache Taglibs</a> </li> <li><a href="${tomcatUrl}lists.html#tomcat-dev">tomcat-dev</a><br /> Development mailing list, including commit messages </li> </ul> </div> </div> <br class="separator" /> </div> <div id="footer" class="curved container"> <div class="col20"> <div class="container"> <h4>Other Downloads</h4> <ul> <li><a href="${tomcatUrl}download-connectors.cgi">Tomcat Connectors</a></li> <li><a href="${tomcatUrl}download-native.cgi">Tomcat Native</a></li> <li><a href="${tomcatUrl}taglibs/">Taglibs</a></li> <li><a href="${tomcatDocUrl}deployer-howto.html">Deployer</a></li> </ul> </div> </div> <div class="col20"> <div class="container"> <h4>Other Documentation</h4> <ul> <li><a href="${tomcatUrl}connectors-doc/">Tomcat Connectors</a></li> <li><a href="${tomcatUrl}connectors-doc/">mod_jk Documentation</a></li> <li><a href="${tomcatUrl}native-doc/">Tomcat Native</a></li> <li><a href="${tomcatDocUrl}deployer-howto.html">Deployer</a></li> </ul> </div> </div> <div class="col20"> <div class="container"> <h4>Get Involved</h4> <ul> <li><a href="${tomcatUrl}getinvolved.html">Overview</a></li> <li><a href="${tomcatUrl}svn.html">SVN Repositories</a></li> <li><a href="${tomcatUrl}lists.html">Mailing Lists</a></li> <li><a href="http://wiki.apache.org/tomcat/FrontPage">Wiki</a></li> </ul> </div> </div> <div class="col20"> <div class="container"> <h4>Miscellaneous</h4> <ul> <li><a href="${tomcatUrl}contact.html">Contact</a></li> <li><a href="${tomcatUrl}legal.html">Legal</a></li> <li><a href="http://www.apache.org/foundation/sponsorship.html">Sponsorship</a></li> <li><a href="http://www.apache.org/foundation/thanks.html">Thanks</a></li> </ul> </div> </div> <div class="col20"> <div class="container"> <h4>Apache Software Foundation</h4> <ul> <li><a href="${tomcatUrl}whoweare.html">Who We Are</a></li> <li><a href="${tomcatUrl}heritage.html">Heritage</a></li> <li><a href="http://www.apache.org">Apache Home</a></li> <li><a href="${tomcatUrl}resources.html">Resources</a></li> </ul> </div> </div> <br class="separator" /> </div> <p class="copyright">Copyright ©1999-${year} Apache Software Foundation. All Rights Reserved</p> </div> </body> </html>
这时候 修改nginx配置文件nginx.conf,把三台tomcat的ip地址以及端口号加入进去,使用nginx做代理
#user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; #log_format main '$remote_addr - $remote_user [$time_local] "$request" ' # '$status $body_bytes_sent "$http_referer" ' # '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; upstream localhost1 { #ip_hash; server 192.168.1.143:8080; server 192.168.1.143:8081; server 192.168.1.143:8082; } server { listen 81; server_name localhost; #charset koi8-r; #access_log logs/host.access.log main; location / { proxy_connect_timeout 3; proxy_send_timeout 30; proxy_read_timeout 30; proxy_pass http://localhost1; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # #location ~ \.php$ { # root html; # fastcgi_pass 127.0.0.1:9000; # fastcgi_index index.php; # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; # include fastcgi_params; #} # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_timeout 5m; # ssl_protocols SSLv2 SSLv3 TLSv1; # ssl_ciphers HIGH:!aNULL:!MD5; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} }
这时候,分别启动三台tomcat以及nginx,访问http://192.168.1.133:81,这时候每次刷新页面,都会随机访问8080或者8081或者8082,而且页面上出现的session id也都是不一样的,我们应该如何让这三台tomcat共享session呢,我们使用redis来做。
这时候,在已经按照三台tomcat的服务器192.168.1.143上,安装redis,安装步骤如下:
$ wget http://download.redis.io/releases/redis-3.2.3.tar.gz $ tar xzf redis-3.2.3.tar.gz $ cd redis-3.2.3 $ make MALLOC=libc #启动redis src前面是安装的路径 $ src/redis-server & #关闭redis src/redis-cli shutdown #使用redis 放入键值对 key value $ src/redis-cli 127.0.0.1:6379> set foo bar OK 127.0.0.1:6379> get foo "bar" $
安装完redis之后,在三个tomcat的lib文件夹内分别上传这五个所依赖的jar,分别是
commons-pool2-2.0.jar
jedis-2.5.2.jar
tomcat-redis-session-manager1.2.jar
tomcat-juli.jar
tomcat-juli-adapters.jar
所有jar在这里了,下载地址
然后分别修个三个tomcat的context.xml文件,增加如下的配置
<?xml version='1.0' encoding='utf-8'?> <Context> <!-- Default set of monitored resources --> <WatchedResource>WEB-INF/web.xml</WatchedResource> <!-- 这里增加redis session共享的配置 6379是redis的端口--> <Valve className="com.orangefunction.tomcat.redissessions.RedisSessionHandlerValve" /> <Manager className="com.orangefunction.tomcat.redissessions.RedisSessionManager" host="127.0.0.1" port="6379" database="0" maxInactiveInterval="60" /> </Context>
这时候,分别重启三个tomcat以及nginx,查看tomcat日志之后,发现没有任何异常报错,说明我们成功了,接下来开始测试。
我们访问nginx服务器地址:http://192.168.1.133:81/
得到的是8080端口的 tomcat1 ,session id为1A0625767F27BA95EF4D5F061FE0568D
这时候按F5刷新页面,得到的是8081端口的 tomcat2 ,session id依旧是 1A0625767F27BA95EF4D5F061FE0568D
再次刷新页面,得到的是8082端口的 tomcat3,session id依旧是 1A0625767F27BA95EF4D5F061FE0568D。 、
这时候,说明我们搭建tomcat + nginx负载均衡 + redis session同步成功啦!
nginx帮助把我们的请求均匀的分发给三个tomcat --》tomcat1 、tomcat2以及tomcat3
redis帮助我们同步session,这样一来,我们的服务器性能就会提高许多,任何一台tomcat发生故障后,对整体的服务都不会有影响了。
以上就是本文的全部内容,希望对大家的学习有所帮助,也希望大家多多支持小牛知识库。
本文向大家介绍Nginx+tomcat负载均衡集群的实现方法,包括了Nginx+tomcat负载均衡集群的实现方法的使用技巧和注意事项,需要的朋友参考一下 实验环境如下 这里需要准备4台服务器(1台nginx、2台tomcat做负载、一台MySQL做数据存储) 准备软件包如下: 软件包地址连接: 链接: https://pan.baidu.com/s/1Zitt5gO5bDocV_8TgilvRw
本文向大家介绍使用Nginx实现负载均衡的策略,包括了使用Nginx实现负载均衡的策略的使用技巧和注意事项,需要的朋友参考一下 一、nginx简介 nginx是一个高性能的HTTP服务器和反向代理服务器。它起初是俄罗斯人Igor Sysoev开发的,至今支撑者俄罗斯的很多大型的网站。 二、nginx支持的三种负载均衡策略 轮询:将请求依次轮询发给每个服务器。 最少链接:将请求发送给持有最少活动链接
本文向大家介绍Nginx与Tomcat实现动静态分离和负载均衡,包括了Nginx与Tomcat实现动静态分离和负载均衡的使用技巧和注意事项,需要的朋友参考一下 本文介绍了Nginx与Tomcat实现动静态分离和负载均衡,所谓动静分离就是通过nginx(或apache等)来处理用户端请求的图片、html等静态的文件,tomcat(或weblogic)处理jsp、do等动态文件,从而达到动静页面访问时
本文向大家介绍nginx+iis实现简单的负载均衡,包括了nginx+iis实现简单的负载均衡的使用技巧和注意事项,需要的朋友参考一下 最近在研究分布式系统架构方面的知识,包括负载均衡,数据库读写分离,分布式缓存redis等。本篇先从负载均衡服务架构入手,关于负载均衡百度百科的定义如下:负载均衡,英文名称为Load Balance,其意思就是分摊到多个操作单元上进行执行,例如Web服务器、FTP服
这一小节中,我们将实战 Nginx 的四层和七层负载均衡功能。条件有限,使用一台公网主机,在上面搭建好 Nginx 服务。公网 IP 为 180.76.152.113。 首先会进行简单的四层负载均衡实验,不会涉及多种负载均衡算法,只使用默认的 Round-Robin算法。在后续的七层负载均衡实验中,会重点测试不同的负载均衡策略,完成相关实验。 1. Nginx的四层负载均衡实验 首先在 nginx
1. 什么是负载均衡 负载均衡,其英文简称Load Balancing,是一种计算机技术。用来在多个计算机(计算机集群)、网络连接、CPU、磁盘驱动器或其他资源中分配负载,以达到最优化资源使用、最大化吞吐率、最小化响应时间、同时避免过载的目的。宏观上的意思是将负载(工作任务,访问请求)进行平衡、分摊到多个操作单元(服务器,组件)上进行执行以解决高性能,单点故障(高可用),扩展性(水平伸缩)等高流量