对Python 网络设备巡检脚本的实例讲解

1、基本信息

我公司之前采用的是人工巡检，但奈何有大量网络设备，往往巡检需要花掉一上午（还是手速快的话）,浪费时间浪费生命。

这段时间正好在学 Python ，于是乎想(其)要(实)解(就)放(是)双(懒)手。

好了，脚本很长又比较挫，有耐心就看看吧。

需要巡检的设备如下：

2、采集数据并写入文件

# 相关设备巡检命令就不介绍了。。。

01DMZ-E8000E.py # 华为 E8000E 交互脚本

#!/usr/bin/env python
import pexpect
import sys
import datetime
 
d1=datetime.datetime.now()
d3=d1+datetime.timedelta(days=-1)
tdy=d3.strftime('%b %d')
today=datetime.date.today().strftime('%Y%m%d')
 
tt=tdy.split()
if int(tt[-1]) < 10:
 tdy=tdy.replace('0',' ')
 
ip=str(sys.argv[1])
passwd=str(sys.argv[2])
password=str(sys.argv[3])
 
child=pexpect.spawn('ssh 用户名@%s'%ip)
fout=file('/usr/sh/shell/linux/xunjian/'+today+'/01DMZ-E8000E.txt','w')
child.logfile = fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect('(?i)E8000E-1>')
child.sendline("su")
child.expect("(?i)assword:")
child.sendline("%s"%password)
child.expect("(?i)E8000E-1>")
child.sendline("dis device | ex Normal")
child.expect("(?i)E8000E-1>")
child.sendline("dis version")
index = child.expect(["(?i)---- More ----","(?i)E8000E-1>"])
if ( index == 0 ):
 child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("dis temperature")
child.expect("(?i)E8000E-1>")
child.sendline("dir")
index = child.expect(["(?i)---- More ----","(?i)E8000E-1>"])
if ( index == 0 ):
 child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("dis memory-usage")
child.expect("(?i)E8000E-1>")
child.sendline("dis hrp state")
child.expect("(?i)E8000E-1>")
child.sendline("dis firewall session table")
index = child.expect(["(?i)---- More ----","(?i)E8000E-1>"])
if ( index == 0 ):
 child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("dis ip routing-table protocol static")
child.expect("(?i)E8000E-1>")
child.sendline("dis int brief | in up")
child.expect("(?i)E8000E-1>")
child.sendline("dis acl 3004")
index = child.expect(["(?i)---- More ----","(?i)E8000E-1>"])
if ( index == 0 ):
 child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("dis acl 3005")
index = child.expect(["(?i)---- More ----","(?i)E8000E-1>"])
if ( index == 0 ):
 child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("dis acl 3006")
index = child.expect(["(?i)---- More ----","(?i)E8000E-1>"])
if ( index == 0 ):
 child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("dis acl 3007")
index = child.expect(["(?i)---- More ----","(?i)E8000E-1>"])
if ( index == 0 ):
 child.send("a")
child.expect("(?i)E8000E-1>")
child.sendline("dis alarm all")
child.expect("(?i)E8000E-1>")
child.sendline("dis logbuffer | in %s"%tdy)
for i in range(20):
 index = child.expect(["(?i)---- More ----","(?i)E8000E-1>"])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("q")
 break

02_03-M9006.py # H3C M9006 交互脚本

#!/usr/bin/env python
import pexpect
import sys
import datetime
d1=datetime.datetime.now()
d3=d1+datetime.timedelta(days=-1)
tdy=d3.strftime('%b')
today=datetime.date.today().strftime('%Y%m%d')
 
ip=str(sys.argv[1])
passwd=str(sys.argv[2])
password=str(sys.argv[3])
 
 
if ip == '判断ip，手动打码':
 txt='03SM-M9006.txt'
else:
 txt='02DMZ-M9006.txt'
 
child=pexpect.spawn('ssh 用户名@%s'%ip)
fout=file('/usr/sh/shell/linux/xunjian/'+today+'/'+txt,'w')
child.logfile = fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect('(?i)M9006>')
child.sendline("su")
child.expect("(?i)assword:")
child.sendline("%s"%password)
child.expect("M9006>")
child.sendline("dis device | ex Normal")
child.expect("M9006>")
child.sendline("dis version | in uptime")
child.expect("M9006>")
child.sendline("dis environment")
for i in range(10):
 index = child.expect(["(?i)---- More ----","M9006>"])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("dir | in total")
 break
child.expect("M9006>")
child.sendline("dis memory")
for i in range(10):
 index = child.expect(["(?i)---- More ----","M9006>"])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("dis irf link")
 break
child.expect("M9006>")
child.sendline("dis redundancy group")
child.expect("---- More ----")
child.send('a')
child.expect("M9006>")
child.sendline("dis session statistics summary")
child.expect("M9006>")
child.sendline("dis ip routing-table protocol static")
child.expect("M9006>")
child.sendline("dis int brief | in UP")
for i in range(10):
 index = child.expect(["(?i)---- More ----","M9006>"])
 if ( index == 0 ):
 child.send(" ")
 else:
 break
if ip == '判断ip':
 child.sendline("dis acl 3001")
 for i in range(10):
 index = child.expect(["(?i)---- More ----","M9006>"])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("dis acl 3002")
 child.expect("M9006>")
 child.sendline("dis alarm")
 break
else:
 child.sendline("dis object-policy ip")
 for i in range(20):
 index = child.expect(["(?i)---- More ----","M9006>"])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("dis alarm")
 break
child.expect("M9006>")
child.sendline("dis logbuffer reverse | in %s"%tdy)
index = child.expect(["(?i)---- More ----","M9006>"]) 这边其实只要一个 for 循环就可以了，不高兴改了
if ( index == 0 ):
 child.send(" ")
 index = child.expect(["(?i)---- More ----","M9006>"])
 if ( index == 0 ):
 child.send(" ")
 index = child.expect(["(?i)---- More ----","M9006>"])
 if ( index == 0 ):
 child.send(" ")
 index = child.expect(["(?i)---- More ----","M9006>"])
 if ( index == 0 ):
 child.send(" ")
 index = child.expect(["(?i)---- More ----","M9006>"])
 if ( index == 0 ):
  child.send(" ")
  index = child.expect(["(?i)---- More ----","M9006>"])
  if ( index == 0 ):
  child.send(" ")
  index = child.expect(["(?i)---- More ----","M9006>"])
  if ( index == 0 ):
  child.send(" ")
  index = child.expect(["(?i)---- More ----","M9006>"])
  if ( index == 0 ):
  child.send(" ")
  index = child.expect(["(?i)---- More ----","M9006>"])
  if ( index == 0 ):
   child.send(" ")
   index = child.expect(["(?i)---- More ----","M9006>"])
   if ( index == 0 ):
   child.send("a")
   index = child.expect(["(?i)---- More ----","M9006>"])
   if ( index == 0 ):
   child.send("a")
   else:
   child.sendline('')
child.expect("M9006>")
child.sendline("q")

04IN-FG3950B.py # 飞塔 FG3950B 交互脚本

#!/usr/bin/env python
import pexpect
import sys
import datetime
today=datetime.date.today().strftime('%Y%m%d')
 
ip=str(sys.argv[1])
passwd=str(sys.argv[2])
 
child=pexpect.spawn('ssh 用户@%s'%ip)
fout=file('/usr/sh/shell/linux/xunjian/'+today+'/04IN-FG3950B.txt','w')
child.logfile = fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect('W-IN-FG3950-1 #')
child.sendline("get sys performance status")
for i in range(5):
 index = child.expect(["(?i)--More--","W-IN-FG3950-1 #"])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("diagnose sys session stat")
 break
child.expect('W-IN-FG3950-1 #')
child.sendline("get route info routing-table static")
child.expect('--More--')
child.send(' ')
child.expect('W-IN-FG3950-1 #')
child.sendline("exit")

05_06DMZ-S9306.py # 华为 S9306 交互脚本

#!/usr/bin/env python
import pexpect
import sys
import datetime
 
d1=datetime.datetime.now()
d3=d1+datetime.timedelta(days=-1)
tdy=d3.strftime('%b %d')
today=datetime.date.today().strftime('%Y%m%d')
 
tt=tdy.split()
if int(tt[-1]) < 10:
 tdy=tdy.replace('0',' ')
 
ip=str(sys.argv[1])
passwd=str(sys.argv[2])
password=str(sys.argv[3])
 
child=pexpect.spawn('ssh 用户名@%s'%ip)
 
if ip == '判断ip，不止一个该类型设备':
 txt='05DMZ-S9306-1.txt'
else:
 txt='06DMZ-S9306-2.txt'
 
fout=file('/usr/sh/shell/linux/xunjian/'+today+'/'+txt,'w')
child.logfile = fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect('<JSYD-WX-12580-DMZ-9306')
child.sendline("su")
child.expect("(?i)assword:")
child.sendline("%s"%password)
child.expect("<JSYD-WX-12580-DMZ-9306")
child.sendline("dis device")
child.expect("<JSYD-WX-12580-DMZ-9306")
child.sendline("dis version | in Quidway")
child.expect("<JSYD-WX-12580-DMZ-9306")
child.sendline("dir")
child.expect("<JSYD-WX-12580-DMZ-9306")
child.sendline("dis cpu-usage")
index = child.expect(["(?i)---- More ----","<JSYD-WX-12580-DMZ-9306(?i)"])
if ( index == 0 ):
 child.send("a")
child.expect("<JSYD-WX-12580-DMZ-9306")
child.sendline("dis memory-usage")
child.expect("<JSYD-WX-12580-DMZ-9306")
child.sendline("dis int brief | in up")
child.expect("<JSYD-WX-12580-DMZ-9306")
child.sendline("dis vrrp brief")
child.expect("<JSYD-WX-12580-DMZ-9306")
child.sendline("dis mac-address total-number")
child.expect("<JSYD-WX-12580-DMZ-9306")
child.sendline("dis arp statistics all")
child.expect("<JSYD-WX-12580-DMZ-9306")
child.sendline("dis ip routing-table protocol static")
child.expect("<JSYD-WX-12580-DMZ-9306")
child.sendline("dis temperature all")
child.expect("<JSYD-WX-12580-DMZ-9306")
child.sendline("dis alarm all")
child.expect("<JSYD-WX-12580-DMZ-9306")
child.sendline("dis logbuffer | in %s"%tdy)
for i in range(50):
 index = child.expect(["(?i)---- More ----","<JSYD-WX-12580-DMZ-9306(?i)"])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("q")
 break

07_08-S12508.py # H3C S12508 交互脚本

#!/usr/bin/env python
import pexpect
import sys
import datetime
d1=datetime.datetime.now()
d3=d1+datetime.timedelta(days=-1)
tdy=d3.strftime('%b %d')
today=datetime.date.today().strftime('%Y%m%d')
 
tt=tdy.split()
if int(tt[-1]) < 10:
 tdy=tdy.replace('0',' ')
 
ip=str(sys.argv[1])
passwd=str(sys.argv[2])
password=str(sys.argv[3])
 
child=pexpect.spawn('ssh 用户名@%s'%ip)
 
IP=['ip1','ip2']
 
if ip == IP[0]:
 txt='07DMZ-S12508.txt'
 name='<W-DMZ-G1G2-12508>'
else:
 txt='08IN-S12508.txt'
 name='<W-IN-G7G8-12508>'
 
fout=file('/usr/sh/shell/linux/xunjian/'+today+'/'+txt,'w')
child.logfile = fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect("%s"%name)
child.sendline("su")
child.expect("(?i)assword:")
child.sendline("%s"%password)
child.expect("%s"%name)
child.sendline("dis device | ex Normal")
child.expect("%s"%name)
child.sendline("dis version | in H3C S12508")
child.expect("%s"%name)
child.sendline("dir")
child.expect("%s"%name)
child.sendline("dis memory")
child.expect("%s"%name)
child.sendline("dis irf link")
for i in range(10):
 index = child.expect(["(?i)---- More ----","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("dis int brief | in UP")
 break
for i in range(20):
 index = child.expect(["(?i)---- More ----","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("dis mac-address count")
 break
child.expect("%s"%name)
child.sendline("dis arp all count")
if ip == "手动打码":
 child.expect("%s"%name)
 child.sendline("dis ip routing-table vpn-instance Dmz protocol static")
 for i in range(20):
 index = child.expect(["(?i)---- More ----","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("dis ip routing-table vpn-instance Inside protocol static")
 for i in range(20):
 index = child.expect(["(?i)---- More ----","%s"%name])
 if ( index == 0 ):
  child.send(" ")
 else:
  child.sendline(" ")
  break
 break
child.expect("%s"%name)
child.sendline("dis environment")
for i in range(50):
 index = child.expect(["(?i)---- More ----","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("dis alarm")
 break
child.expect("%s"%name)
child.sendline("dis logbuffer | in %s"%tdy)
 
for i in range(50):
 index = child.expect(["(?i)---- More ----","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("q")
 sys.exit()

09_10SM-N7K.py # Cisco N7K 交互脚本

#!/usr/bin/env python
import pexpect
import sys
import datetime
today=datetime.date.today().strftime('%Y%m%d')
 
ip=str(sys.argv[1])
passwd=str(sys.argv[2])
 
child=pexpect.spawn('telnet %s'%ip)
 
 
if ip == '是个ip':
 txt='09SM-N7K-1.txt'
 name='W-SM-N7K-1#'
else:
 txt='10SM-N7K-2.txt'
 name='W-SM-N7K-2#'
 
fout=file('/usr/sh/shell/linux/xunjian/'+today+'/'+txt,'w')
child.logfile = fout
child.expect('login:')
child.sendline("发送用户名")
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect("%s"%name)
child.sendline("sh hardware | in ok")
child.expect("%s"%name)
child.sendline("sh version | in uptime")
child.expect("%s"%name)
child.sendline("dir")
child.expect("%s"%name)
child.sendline("sh int brief | in up")
for i in range(10):
 index = child.expect(["(?i)More--","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("sh hsrp brief")
 break
child.expect("%s"%name)
child.sendline("sh mac address-table count")
child.expect("%s"%name)
child.sendline("sh ip arp | in number")
child.expect("%s"%name)
child.sendline("sh ip route static summary")
child.expect("%s"%name)
child.sendline("sh environment temperature")
for i in range(10):
 index = child.expect(["(?i)More--","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("sh vpc")
 break
for i in range(10):
 index = child.expect(["(?i)More--","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("sh logging last 30")
 break
for i in range(10):
 index = child.expect(["(?i)More--","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("exit")
 sys.exit()

11_12DMZ-NE40E.py # 华为 NE40E 交互脚本

#!/usr/bin/env python
import pexpect
import sys
import datetime
d1=datetime.datetime.now()
d3=d1+datetime.timedelta(days=-1)
tdy=d3.strftime('%b %d')
today=datetime.date.today().strftime('%Y%m%d')
 
tt=tdy.split()
if int(tt[-1]) < 10:
 tdy=tdy.replace('0',' ')
 
ip=str(sys.argv[1])
passwd=str(sys.argv[2])
 
child=pexpect.spawn('ssh 用户名@%s'%ip)
 
IP=['ip1','ip2']
 
if ip == IP[0]:
 txt='11DMZ-NE40E-1.txt'
 name='<W-SM-E11-NE40E-01>'
elif ip == IP[1]:
 txt='12DMZ-NE40E-2.txt'
 name='<W-SM-E12-NE40E-02>'
else:
 print "IP Input Error!"
 sys.exit()
 
fout=file('/usr/sh/shell/linux/xunjian/'+today+'/'+txt,'w')
child.logfile = fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
child.expect("(?i)N]:")
child.sendline("n")
child.expect("%s"%name)
child.sendline("dis device | ex Normal")
child.expect("%s"%name)
child.sendline("dis version | in NE40E-X8 uptime")
child.expect("%s"%name)
child.sendline("dir")
index = child.expect(["(?i)---- More ----","%s"%name])
if ( index == 0 ):
 child.send(" ")
 index = child.expect(["(?i)---- More ----","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("dis memory-usage")
else:
 child.sendline("dis memory-usage")
child.expect("%s"%name)
child.sendline("dis int brief | in up")
child.expect("%s"%name)
child.sendline("dis ip routing-table protocol static")
child.expect("%s"%name)
child.sendline("dis temperature")
for i in range(40):
 index = child.expect(["(?i)---- More ----","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("dis alarm all")
 break
child.expect("%s"%name)
child.sendline("dis logbuffer | in %s"%tdy)
for i in range(30):
 index = child.expect(["(?i)---- More ----","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("q")
 break

13_16-RD5412_6420.py # Radware RD5412 交互脚本，只要掌握一个，其他都是套路

#!/usr/bin/env python
import pexpect
import sys
import datetime
d1=datetime.datetime.now()
d3=d1+datetime.timedelta(days=-1)
tdy=d3.strftime('%b %d')
today=datetime.date.today().strftime('%Y%m%d')
 
tt=tdy.split()
if int(tt[-1]) < 10:
 tdy=tdy.replace('0',' ')
 
ip=str(sys.argv[1])
passwd=str(sys.argv[2])
 
child=pexpect.spawn('ssh 还是用户名@%s'%ip)
 
IP=['ip1','ip2','ip3','ip4']
 
if ip == IP[0]:
 txt='13DMZ-RD5412-1.txt'
elif ip == IP[1]:
 txt='14DMZ-RD5412-2.txt'
elif ip == IP[2]:
 txt='15SM-RD6420-1.txt'
elif ip == IP[3]:
 txt='16SM-RD6420-2.txt'
else:
 print "IP Input Error!"
 sys.exit()
name='Standalone ADC(?i)'
 
fout=file('/usr/sh/shell/linux/xunjian/'+today+'/'+txt,'w')
child.logfile = fout
child.expect('(?i)ssword:')
child.sendline("%s"%passwd)
if ip == IP[3]:
 child.expect("(?i)y]:")
 child.sendline("y")
child.expect("%s"%name)
child.sendline("/i/sys/general")
child.expect("%s"%name)
child.sendline("/i/sys/ps")
child.expect("%s"%name)
child.sendline("/i/sys/fan")
child.expect("%s"%name)
child.sendline("/i/link")
index = child.expect(["Press q to quit, any other key to continue","%s"%name])
if ( index == 0 ):
 child.send(" ")
 index = child.expect(["Press q to quit, any other key to continue","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("/i/sys/capacity slb")
else:
 child.sendline("/i/sys/capacity slb")
index = child.expect(["Press q to quit, any other key to continue","%s"%name])
if ( index == 0 ):
 child.send(" ")
 index = child.expect(["Press q to quit, any other key to continue","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 index = child.expect(["Press q to quit, any other key to continue","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("/stats/mp/cpu")
 else:
 child.sendline("/stats/mp/cpu")
else:
 child.sendline("/stats/mp/cpu")
child.expect("%s"%name)
child.sendline("/stats/mp/mem")
child.expect("%s"%name)
child.sendline("/i/sys/temp")
child.expect("%s"%name)
child.sendline("/i/l3/vrrp")
child.expect("%s"%name)
child.sendline("/i/sys/log")
for i in range(50):
 index = child.expect(["Press q to quit, any other key to continue","%s"%name])
 if ( index == 0 ):
 child.send(" ")
 else:
 child.sendline("exit")
 break
#index = child.expect(["(?i)n]:","%s"%name])
#if ( index == 0 ):
if ip == IP[3]:
 child.expect("(?i)n]:")
 child.sendline("y")
#else:
# pass
child.expect("(?i)n]:")
child.sendline("n")

3、编写邮件脚本

mail.py

#!/usr/bin/python
# -*- coding: utf-8 -*-
from email.header import Header
import smtplib 
import email.MIMEMultipart# import MIMEMultipart 
import email.MIMEText# import MIMEText 
import email.MIMEBase# import MIMEBase 
import os.path 
import sys 
import mimetypes 
import email.MIMEImage# import MIMEImage 
import datetime
 
 
tday=datetime.date.today().strftime('%Y/%m/%d')
#命令 mail.py <1:发送方（回复地址）10000@qq.com> <2:发送地址，多个以;隔开> <3:发送文件> 
From = "%s<*@139.com>" % Header("XXX","utf-8")
ReplyTo=sys.argv[1]
To = sys.argv[2]
file_name = sys.argv[3]#附件名 
file_name1 = sys.argv[4] 
server = smtplib.SMTP("smtp.139.com",25) 
server.login("user@139.com","password") #仅smtp服务器需要验证时 
 
# 构造MIMEMultipart对象做为根容器 
main_msg = email.MIMEMultipart.MIMEMultipart() 
 
# 构造MIMEText对象做为邮件显示内容并附加到根容器 
text_msg = email.MIMEText.MIMEText("message内容正文",_charset="utf-8") 
main_msg.attach(text_msg) 
 
# 构造MIMEBase对象做为文件附件内容并附加到根容器 
ctype,encoding = mimetypes.guess_type(file_name) 
if ctype is None or encoding is not None: 
 ctype='application/octet-stream' 
maintype,subtype = ctype.split('/',1) 
file_msg=email.MIMEImage.MIMEImage(open(file_name,'rb').read(),subtype) 
file_msg1=email.MIMEImage.MIMEImage(open(file_name1,'rb').read(),subtype)
 
## 设置附件头 
basename = os.path.basename(file_name) 
file_msg.add_header('Content-Disposition','attachment', filename = basename)#修改邮件头 
main_msg.attach(file_msg) 
 
basename1 = os.path.basename(file_name1)
file_msg1.add_header('Content-Disposition','attachment', filename = basename1)#修改邮件头
main_msg.attach(file_msg1)
 
# 设置根容器属性 
main_msg['From'] = From 
main_msg['Reply-to'] = ReplyTo 
#main_msg['To'] = To 
main_msg['Subject'] = u"[每日巡检] %s邮件标题" %tday
main_msg['Date'] = email.Utils.formatdate() 
 
#main_msg['Bcc'] = To 
# 得到格式化后的完整文本 
fullText = main_msg.as_string( ) 
 
# 用smtp发送邮件 
try: 
 server.sendmail(From, To.split(';'), fullText) 
finally: 
 server.quit()

mail_excel_error.py # 报错通知邮件：excel不存在

#!/usr/bin/env python
# -*- coding:utf-8 -*-
#import sys
#reload(sys)
import smtplib,string,datetime,xlrd
 
tday=datetime.date.today().strftime('%Y/%m/%d')
HOST="smtp.139.com"
SUBJECT="[每日巡检] %s哈哈哈"%tday
TO="*.com"
FROM="*@139.com"
 
text="excel no cunzai"
 
BODY=string.join((
 "FROM: %s" % FROM,
 "To: %s" % TO,
 "Subject: %s" % SUBJECT,
 "",
 text
 ), "\r\n")
server=smtplib.SMTP()
server.connect(HOST,"25")
server.starttls()
server.login(FROM,"密码")
server.sendmail(FROM,[TO],BODY)
server.quit()

mail_zip_error.py # 邮件告警：巡检历史记录压缩文档不存在

#!/usr/bin/env python
# -*- coding:utf-8 -*-
#import sys
#reload(sys)
import smtplib,string,datetime,xlrd
 
tday=datetime.date.today().strftime('%Y/%m/%d')
HOST="smtp.139.com"
SUBJECT="[每日巡检] %s嘻嘻嘻" %tday
TO="asdas.com"
FROM="***@139.com"
 
text="zip no cunzai"
 
BODY=string.join((
 "FROM: %s" % FROM,
 "To: %s" % TO,
 "Subject: %s" % SUBJECT,
 "",
 text
 ), "\r\n")
server=smtplib.SMTP()
server.connect(HOST,"25")
server.starttls()
server.login(FROM,"PASSWORD")
server.sendmail(FROM,[TO],BODY)
server.quit()

4、数据处理

wangluo_xunjian.py # 根据巡检内容制表

#!/usr/bin/env python
# -*- coding:utf-8 -*-
#import sys
#reload(sys)
import xlsxwriter,os,datetime
 
def cmd(sname,fname):  # 该函数判断巡检命令行所在输出文件位置
 i=1
 f=open(fname)
 line_hang_list=[]
 for line in f:
 if line.find(sname) == 0:
 line_hang_list.append(i)
 i+=1
 f.close
 return line_hang_list
 
def cmd1(sname,fname): # 同上
 i=1
 f=open(fname)
 line_hang_list=[]
 for line in f:
 if sname in line:
 line_hang_list.append(i)
 i+=1
 f.close
 return line_hang_list
 
tday=datetime.date.today().strftime('%Y.%m.%d')
today=datetime.date.today().strftime('%Y%m%d')
workbook=xlsxwriter.Workbook(u"/usr/sh/shell/linux/xunjian/%s/网络设备巡检-%s.xlsx"%(today,tday),{'strings_to_numbers':True})
 
file_01='/usr/sh/shell/linux/xunjian/'+str(today)+'/01DMZ-E8000E.txt'
file_02_1='/usr/sh/shell/linux/xunjian/'+str(today)+'/03SM-M9006.txt'
file_02_2='/usr/sh/shell/linux/xunjian/'+str(today)+'/02DMZ-M9006.txt'
file_03='/usr/sh/shell/linux/xunjian/'+str(today)+'/04IN-FG3950B.txt'
 
 
# 新建 sheet
worksheet0=workbook.add_worksheet(u"防火墙")
worksheet1=workbook.add_worksheet(u"交换机")
worksheet2=workbook.add_worksheet(u"路由器")
worksheet3=workbook.add_worksheet(u"负载")
 
# 设置单元格格式(居中，颜色，边框，合并，列宽，列隐藏等)
colour='#660099'
 
format_title=workbook.add_format()
format_title.set_border(1)
format_title.set_bottom(2)
format_title.set_bold(1)
format_title.set_font_color('white')
format_title.set_bg_color(colour)
format_title.set_align('center')
format_title.set_valign('vcenter')
 
format_nr=workbook.add_format()
format_nr.set_border(1)
format_nr.set_bottom(2)
format_nr.set_align('center')
format_nr.set_valign('vcenter')
 
format_nrr=workbook.add_format()
format_nrr.set_border(1)
format_nrr.set_valign('vcenter')
format_nrr.set_text_wrap()
 
format_bottom=workbook.add_format()
format_bottom.set_border(1)
format_bottom.set_bottom(2)
format_bottom.set_valign('vcenter')
format_bottom.set_text_wrap()
 
format_rt=workbook.add_format()
format_rt.set_border(1)
format_rt.set_right(2)
format_rt.set_valign('left')
format_rt.set_text_wrap()
 
format_right=workbook.add_format()
format_right.set_border(1)
format_right.set_right(2)
format_right.set_bottom(2)
format_right.set_valign('vcenter')
format_right.set_text_wrap()
 
format_red=workbook.add_format()
format_red.set_font_color('red')
format_red.set_border(1)
format_red.set_right(2)
format_red.set_valign('vcenter')
 
format_rd=workbook.add_format()
format_rd.set_font_color('red')
format_rd.set_border(1)
format_rd.set_right(2)
format_rd.set_bottom(2)
format_rd.set_valign('vcenter')
 
# 填写相关固定单元格内容
firewall_title=[u'设备名称',u'设备类型',u'IP地址',u'检查项',u'命令',u'说明',u'检查结果']
 
firewall_jc=[u'设备状态',u'运行时长',u'运行温度',u'Flash状态',u'CPU使用率',u'内存使用率',u'冗余组状态',u'session数目',u'路由条数',u'端口状态',u'策略条数',u'告警',u'日志',u'板卡状态',u'运行时长',u'运行温度',u'Flash状态',u'CPU使用率',u'内存使用率',u'堆叠状态',u'冗余组状态',u'session数目',u'路由条数',u'端口状态',u'策略条数',u'告警',u'日志',u'板卡状态',u'运行时长',u'运行温度',u'Flash状态',u'CPU使用率',u'内存使用率',u'堆叠状态',u'冗余组状态',u'session数目',u'路由条数',u'端口状态',u'策略条数',u'告警',u'日志',u'运行时长',u'CPU使用率 (BOMC看)',u'内存使用率',u'网络流量',u'session数目',u'新建session速率',u'接口状态',u'冗余组状态',u'路由条数',u'日志',u'策略条数',u'告警']
 
firewall_cmd=['dis device | ex Normal','dis version','dis temperature','dir',u'在BOMC看','dis memory-usage','dis hrp state','dis firewall session table','dis ip routing-table protocol static','dis int brief (dis logbuffer | in DOWN)','dis acl 3004 (3004-3007)','dis alarm all','dis logbuffer | in [data]','dis device | ex Normal','dis version | in uptime','dis environment','dir | in total',u'在BOMC看','dis memory','dis irf link','dis redundancy group','dis session statistics summary','dis ip routing-table protocol static','dis int brief (dis logbuffer | in DOWN)','dis object-policy ip','dis alarm','dis logbuffer | in [month]','dis device | ex Normal','dis version | in uptime','dis environment','dir | in total',u'在BOMC看','dis memory','dis irf link','dis redundancy group','dis session statistics summary','dis ip routing-table protocol static','dis int brief (dis logbuffer | in DOWN)','dis acl all','dis alarm','dis logbuffer | in [month]','get sys performance status','','','','diagnose sys session stat','',u'网页登录查看',u'网页登录查看','get route info routing table static',u'网页登录查看',u'网页登录查看',u'网页登录查看']
 
firewall_sm=[u'填写Status是Abnormal的项',u'填写已运行天数,小时数',u'填写温度范围',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写本机和邻居的角色，看有无发生主备切换',u'填写链接总数',u'填写路由数目',u'填写状态为UP的端口数目',u'填写策略数目',u'填写告警内容，无告警则填写“无告警”',u'填写异常日志，无异常则填写“正常”',u'填写State为Absent，且Type不为NONE的项',u'填写已运行天数，小时数',u'填写温度范围',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率范围',u'填写Status不是UP的项',u'填写Status，看有无发生主备切换',u'填写链接总数',u'填写路由数目',u'填写状态为UP的端口数目',u'填写策略数目(所有rule的总数)',u'填写告警内容，无告警则填写“无告警”',u'填写异常日志，无异常则填写“正常”',u'填写State为Absent，且Type不为NONE的项',u'填写已运行天数，小时数',u'填写温度范围',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率范围',u'填写Status不是UP的项',u'填写Status，看有无发生主备切换',u'填写链接总数',u'填写路由数目',u'填写状态为UP的端口数目',u'填写策略数目(acl 3001+3002的总条目数)',u'填写告警内容，无告警则填写“无告警”',u'填写异常日志，无异常则填写“正常”',u'填写已运行天数，小时数',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写30分钟内平均带宽占用（kbps）',u'填写session_count值',u'填写setup_rate值',u'填写启用状态的接口数目',u'填写冗余状态',u'填写路由数目',u'填写异常日志，无异常则填写“正常”',u'填写策略数目',u'填写告警内容，无告警则填写“无告警”']
 
 
switch_title=[u'设备名称',u'设备类型',u'IP地址',u'检查项',u'命令',u'说明',u'检查结果']
 
switch_jc=[u'设备状态',u'运行时长',u'Flash状态',u'CPU使用率',u'内存使用率',u'接口状态',u'VRRP状态',u'MAC地址条目数',u'ARP条目数',u'路由条目数',u'运行温度',u'告警',u'日志']
switch_jc1=[u'设备状态',u'运行时长',u'Flash状态',u'CPU使用率',u'内存使用率',u'堆叠状态',u'接口状态',u'MAC地址条目数',u'ARP条目数',u'路由条目数',u'运行温度',u'告警',u'日志']
 
switch_jc2=[u'设备状态',u'运行时长',u'Flash状态',u'CPU使用率',u'内存使用率',u'堆叠状态',u'接口状态',u'MAC地址条目数',u'ARP条目数',u'运行温度',u'告警',u'日志']
 
switch_cmd=['dis device','dis version | in Quidway','dir','dis cpu-usage','dis memory-usage','dis int brief (dis logbuffer | in IF_STATE)','dis vrrp brief','dis mac-address total-number','dis arp statistics all','dis ip routing-table protocol static','dis temperature all','dis alarm all','dis logbuffer | in [date]']
 
switch_cmmd=['dis device | ex Normal','dis version | in H3C S12508','dir',u'在BOMC看','dis memory','dis irf link','dis int brief (dis logbuffer reverse | in UPDOWN)','dis mac-address count','dis arp all count','dis ip routing-table vpn-instance Dmz/Inside protocol static','dis environment','dis alarm','dis logbuffer reverse | in [date]']
 
switch_cmd1=['dis device | ex Normal','dis version | in H3C S12508','dir',u'在BOMC看','dis memory','dis int brief (dis logbuffer reverse | in UPDOWN)','dis vrrp','dis mac-address count','dis arp all count','dis ip routing-table protocol static','dis environment','dis alarm','dis logbuffer reverse | in [date]']
 
switch_cmd2=['dis device | ex Normal','dis version | in H3C S12508','dir',u'在BOMC看','dis memory','dis irf link','dis int brief (dis logbuffer reverse | in UPDOWN)','dis mac-address count','dis arp all count','dis environment','dis alarm','dis logbuffer reverse | in [date]']
 
switch_sm=[u'查看电源、风扇以及板卡状态，填写异常项',u'填写已运行天数，小时数',u'填写total和free的flash大小',u'填写CPU使用率',u'填写内存使用率',u'填写状态为UP的端口数目',u'查看VRRP主备状态',u'填写总的mac-address条目数',u'填写动态和静态ARP条目数',u'填写路由数目',u'填写温度范围',u'填写告警内容，无告警则填写“无告警”',u'填写异常日志，无异常则填写“正常”']
 
switch_ssm=[u'填写状态异常的项',u'填写已运行天数，小时数',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写Status不是UP的项',u'填写状态为UP的端口数目',u'填写总的mac-address条目数',u'填写总的ARP条目数',u'填写路由数目(Dmz和Inside路由总和)',u'填写温度范围',u'填写设备告警，无则填写“无告警”',u'填写异常日志，无异常则填写“正常”']
 
switch_sm1=[u'填写状态异常的项',u'填写已运行天数，小时数',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写状态为UP的端口数目',u'查看VRRP主备状态',u'填写总的mac-address条目数',u'填写总的ARP条目数',u'填写路由数目',u'填写温度范围',u'填写设备告警，无则填写“无告警”',u'填写异常日志，无异常则填写“正>常”']
 
switch_sm2=[u'填写状态异常的项',u'填写已运行天数，小时数',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写Status不是UP的项',u'填写状态为UP的端口数目',u'填写总的mac-address条目数',u'填写总的ARP条目数',u'填写温度范围',u'填写设备告警，无则填写“无告警”',u'填写异常日志，无异常则填写“正>常”']
 
route_title=[u'设备名称',u'设备类型',u'IP地址',u'检查项',u'命令',u'说明',u'检查结果']
 
route_jc=[u'设备状态',u'运行时长',u'Flash状态',u'CPU使用率',u'内存使用率',u'接口状态',u'路由条数',u'运行温度',u'告警',u'日志']
 
route_cmd=['dis device | ex Normal','dis version | in NE40E-X8 uptime','dir',u'在BOMC看','dis memory-usage','dis int brief (dis logbuffer | in IF_STATE)','dis ip routing-table protocol static','dis temperature','dis alarm all','dis logbuffer | in [date]']
 
route_sm=[u'填写Status不是“Normal”的项',u'填写已运行天数，小时数',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写状态为UP的端口数目',u'填写路由数目',u'填写温度范围',u'填写告警内容，无告警则填写“无告警”',u'填写异常日志，无异常则填写“正常”']
 
fuzai_title=[u'设备名称',u'设备类型',u'IP地址',u'检查项',u'命令',u'说明',u'检查结果']
 
fuzai_jc=[u'运行时长',u'电源状态',u'风扇状态',u'端口状态',u'各表项数值',u'CPU使用率',u'内存使用率',u'硬件温度',u'冗余状态',u'日志']
 
fuzai_cmd=['/i/sys/general','/i/sys/ps','/i/sys/fan','/i/link','/i/sys/capacity slb','/stats/mp/cpu','/stats/mp/mem','/i/sys/temp','/i/l3/vrrp','/i/sys/log']
 
fuzai_sm=[u'填写已运行天数，小时数',u'填写电源状态',u'填写风扇状态',u'填写Link处于UP状态的端口数',u'填写real servers/server groups/virtual servers/filters当前值',u'填写CPU使用率',u'填写内存使用率',u'填写温度',u'填写VRRP状态，"master"或者"backup"',u'填写异常日志，无异常则填写“正常”']
 
newsmswitch_title=[u'设备状态',u'运行时长',u'Flash状态',u'CPU使用率',u'内存使用率',u'接口状态',u'HSRP状态',u'MAC地址条目数',u'ARP条目数',u'路由条目数',u'运行温度',u'VPC状态',u'日志']
newsmswitch_cmd=['sh hardware | in ok','sh version | in uptime','dir',u'在BOMC看',u'在BOMC看','sh int brief (sh int brief | in up)','sh hsrp brief','sh mac address-table count','sh ip arp | in number','sh ip route static summary','sh environment temperature','sh vpc','sh logging last 30']
 
newsmswitch_sm=[u'填写状态为OK的模块数',u'填写已运行天数，小时数',u'填写total和free的flash大小',u'填写CPU使用率峰值和平均值',u'填写内存使用率',u'填写状态为UP的端口数目',u'查看HSRP状态(Active local则正常)',u'填写总的mac-address条目数',u'填写总的ARP条目数',u'填写路由数目',u'填写CurTemp范围',u'查看VPC状态是否正常',u'查看日志，无异常则填写"正常"']
 
# ip 我就隐藏掉啦,虽然也没什么意思
host={"DMZ-E8000E":[u'防火墙',"ip1"],"DMZ-M9006":[u'防火墙','ip2'],"SM-M9006":[u'防火墙','ip3'],"IN-FG3950B":[u'防火墙',"ip4"],"DMZ-S9306-1":[u'交换机',"ip5"],"DMZ-S9306-2":[u'交换机',"ip6"],"DMZ-S12508":[u'交换机',"ip7"],"IN-S12508":[u'交换机',"ip8"],"SM-S12508-1":[u'交换机',"ip9"],"SM-S12508-2":[u'交换机',"ip10"],"DMZ-NE40E-1":[u'路由器',"ip11"],"DMZ-NE40E-2":[u'路由器',"ip12"],"DMZ-RD5412-1":[u'负载',"ip13"],"DMZ-RD5412-2":[u'负载',"ip14"],"SM-RD6420-1":[u'负载',"ip15"],"SM-RD6420-2":[u'负载',"ip16"],"SM-N7K-1":[u"交换机","ip17"],"SM-N7K-2":[u"交换机","ip18"]}
 
# 开始填写固定单元格内容
worksheet0.write_row('A1',firewall_title,format_title)
worksheet0.merge_range('A2:A14','DMZ-E8000E',format_nr)
worksheet0.merge_range('B2:B14',host["DMZ-E8000E"][0],format_nr)
worksheet0.merge_range('C2:C14',host["DMZ-E8000E"][1],format_nr)
worksheet0.merge_range('A15:A28','DMZ-M9006',format_nr)
worksheet0.merge_range('B15:B28',host["DMZ-M9006"][0],format_nr)
worksheet0.merge_range('C15:C28',host["DMZ-M9006"][1],format_nr)
worksheet0.merge_range('A29:A42','SM-M9006',format_nr)
worksheet0.merge_range('B29:B42',host["SM-M9006"][0],format_nr)
worksheet0.merge_range('C29:C42',host["SM-M9006"][1],format_nr)
worksheet0.merge_range('A43:A54','IN-FG3950B',format_nr)
worksheet0.merge_range('B43:B54',host["IN-FG3950B"][0],format_nr)
worksheet0.merge_range('C43:C54',host["IN-FG3950B"][1],format_nr)
worksheet0.merge_range('E43:E46','get sys performance status',format_nrr)
worksheet0.merge_range('E47:E48','diagnose sys session stat',format_nrr)
worksheet0.write_column('D2',firewall_jc,format_nrr)
worksheet0.write_column('E2',firewall_cmd,format_nrr)
worksheet0.write_column('F2',firewall_sm,format_nrr)
worksheet0.write('D14',u'日志',format_bottom)
worksheet0.write('E14','dis logbuffer | in [data]',format_bottom)
worksheet0.write('F14',u'填写异常日志，无异常则填写“正常”',format_bottom)
worksheet0.write('D28',u'日志',format_bottom)
worksheet0.write('E28','dis logbuffer reverse | in [month]',format_bottom)
worksheet0.write('F28',u'填写异常日志，无异常则填写“正常”',format_bottom)
worksheet0.write('D42',u'日志',format_bottom)
worksheet0.write('E42','dis logbuffer reverse | in [month]',format_bottom)
worksheet0.write('F42',u'填写异常日志，无异常则填写“正常”',format_bottom)
worksheet0.write('D54',u'告警',format_bottom)
worksheet0.write('E54',u'网页登录查看',format_bottom)
worksheet0.write('F54',u'填写告警内容，无告警则填写“无告警”',format_bottom)
worksheet0.set_row(0,30)
worksheet0.set_column('B:B',15,None,{'hidden':1})
worksheet0.set_column('E:F',40,None,{'hidden':1})
worksheet0.set_column('A:A',15)
worksheet0.set_column('C:D',15)
worksheet0.set_column('G:G',40)
 
worksheet1.write_row('A1',switch_title,format_title)
worksheet1.merge_range('A2:A14','DMZ-S9306-1',format_nr)
worksheet1.merge_range('B2:B14',host["DMZ-S9306-1"][0],format_nr)
worksheet1.merge_range('C2:C14',host["DMZ-S9306-1"][1],format_nr)
worksheet1.merge_range('A15:A27','DMZ-S9306-2',format_nr)
worksheet1.merge_range('B15:B27',host["DMZ-S9306-2"][0],format_nr)
worksheet1.merge_range('C15:C27',host["DMZ-S9306-2"][1],format_nr)
worksheet1.merge_range('A28:A40','DMZ-S12508',format_nr)
worksheet1.merge_range('B28:B40',host["DMZ-S12508"][0],format_nr)
worksheet1.merge_range('C28:C40',host["DMZ-S12508"][1],format_nr)
worksheet1.merge_range('A41:A52','IN-S12508',format_nr)
worksheet1.merge_range('B41:B52',host["IN-S12508"][0],format_nr)
worksheet1.merge_range('C41:C52',host["IN-S12508"][1],format_nr)
 
worksheet1.merge_range('A53:A65','SM-N7K-1',format_nr)
worksheet1.merge_range('B53:B65',host["SM-N7K-1"][0],format_nr)
worksheet1.merge_range('C53:C65',host["SM-N7K-1"][1],format_nr)
worksheet1.merge_range('A66:A78','SM-N7K-2',format_nr)
worksheet1.merge_range('B66:B78',host["SM-N7K-2"][0],format_nr)
worksheet1.merge_range('C66:C78',host["SM-N7K-2"][1],format_nr)
 
worksheet1.write_column('D2',switch_jc,format_nrr)
worksheet1.write_column('D15',switch_jc,format_nrr)
worksheet1.write_column('D28',switch_jc1,format_nrr)
worksheet1.write_column('D41',switch_jc2,format_nrr)
worksheet1.write_column('D53',newsmswitch_title,format_nrr)
worksheet1.write_column('D66',newsmswitch_title,format_nrr)
worksheet1.write_column('E2',switch_cmd,format_nrr)
worksheet1.write_column('E15',switch_cmd,format_nrr)
worksheet1.write_column('E28',switch_cmmd,format_nrr)
worksheet1.write_column('E41',switch_cmd2,format_nrr)
worksheet1.write_column('E53',newsmswitch_cmd,format_nrr)
worksheet1.write_column('E66',newsmswitch_cmd,format_nrr)
worksheet1.write_column('F2',switch_sm,format_nrr)
worksheet1.write_column('F15',switch_sm,format_nrr)
worksheet1.write_column('F28',switch_ssm,format_nrr)
worksheet1.write_column('F41',switch_sm2,format_nrr)
worksheet1.write_column('F53',newsmswitch_sm,format_nrr)
worksheet1.write_column('F66',newsmswitch_sm,format_nrr)
worksheet1.set_row(0,30)
worksheet1.set_column('B:B',15,None,{'hidden':1})
worksheet1.set_column('E:F',40,None,{'hidden':1})
worksheet1.set_column('A:A',15)
worksheet1.set_column('C:D',15)
worksheet1.set_column('G:G',40)
 
 
worksheet2.write_row('A1',route_title,format_title)
worksheet2.merge_range('A2:A11','DMZ-NE40E-1',format_nr)
worksheet2.merge_range('B2:B11',host["DMZ-NE40E-1"][0],format_nr)
worksheet2.merge_range('C2:C11',host["DMZ-NE40E-1"][1],format_nr)
worksheet2.merge_range('A12:A21','DMZ-NE40E-2',format_nr)
worksheet2.merge_range('B12:B21',host["DMZ-NE40E-2"][0],format_nr)
worksheet2.merge_range('C12:C21',host["DMZ-NE40E-2"][1],format_nr)
worksheet2.write_column('D2',route_jc,format_nrr)
worksheet2.write_column('D12',route_jc,format_nrr)
worksheet2.write_column('E2',route_cmd,format_nrr)
worksheet2.write_column('E12',route_cmd,format_nrr)
worksheet2.write_column('F2',route_sm,format_nrr)
worksheet2.write_column('F12',route_sm,format_nrr)
worksheet2.set_row(0,30)
worksheet2.set_column('B:B',15,None,{'hidden':1})
worksheet2.set_column('E:F',40,None,{'hidden':1})
worksheet2.set_column('A:A',15)
worksheet2.set_column('C:D',15)
worksheet2.set_column('G:G',40)
 
worksheet3.write_row('A1',fuzai_title,format_title)
worksheet3.merge_range('A2:A11','DMZ-RD5412-1',format_nr)
worksheet3.merge_range('B2:B11',host["DMZ-RD5412-1"][0],format_nr)
worksheet3.merge_range('C2:C11',host["DMZ-RD5412-1"][1],format_nr)
worksheet3.merge_range('A12:A21','DMZ-RD5412-2',format_nr)
worksheet3.merge_range('B12:B21',host["DMZ-RD5412-2"][0],format_nr)
worksheet3.merge_range('C12:C21',host["DMZ-RD5412-2"][1],format_nr)
worksheet3.merge_range('A22:A31','SM-RD6420-1',format_nr)
worksheet3.merge_range('B22:B31',host["SM-RD6420-1"][0],format_nr)
worksheet3.merge_range('C22:C31',host["SM-RD6420-1"][1],format_nr)
worksheet3.merge_range('A32:A41','SM-RD6420-2',format_nr)
worksheet3.merge_range('B32:B41',host["SM-RD6420-2"][0],format_nr)
worksheet3.merge_range('C32:C41',host["SM-RD6420-2"][1],format_nr)
worksheet3.write_column('D2',fuzai_jc,format_nrr)
worksheet3.write_column('D12',fuzai_jc,format_nrr)
worksheet3.write_column('D22',fuzai_jc,format_nrr)
worksheet3.write_column('D32',fuzai_jc,format_nrr)
worksheet3.write_column('E2',fuzai_cmd,format_nrr)
worksheet3.write_column('E12',fuzai_cmd,format_nrr)
worksheet3.write_column('E22',fuzai_cmd,format_nrr)
worksheet3.write_column('E32',fuzai_cmd,format_nrr)
worksheet3.write_column('F2',fuzai_sm,format_nrr)
worksheet3.write_column('F12',fuzai_sm,format_nrr)
worksheet3.write_column('F22',fuzai_sm,format_nrr)
worksheet3.write_column('F32',fuzai_sm,format_nrr)
worksheet3.set_row(0,30)
worksheet3.set_column('B:B',15,None,{'hidden':1})
worksheet3.set_column('E:F',40,None,{'hidden':1})
worksheet3.set_column('A:A',15)
worksheet3.set_column('C:D',15)
worksheet3.set_column('G:G',40)
 
jcx=[u'日志','dis logbuffer | in [date]',u'填写异常日志，无异常则填写“正常”']
jcx1=[u'日志','dis logbuffer reverse | in [date]',u'填写异常日志，无异常则填写“正常”']
jcx2=[u'日志','sh logging last 30',u'查看日志，无异常则填写“正常”']
 
fuzai_jcx=[u'日志','/i/sys/log',u'填写异常日志，无异常则填写“正常”']
worksheet1.write_row('D14',jcx,format_bottom)
worksheet1.write_row('D27',jcx,format_bottom)
worksheet1.write_row('D40',jcx,format_bottom)
worksheet1.write_row('D52',jcx1,format_bottom)
worksheet1.write_row('D65',jcx2,format_bottom)
worksheet1.write_row('D78',jcx2,format_bottom)
worksheet2.write_row('D11',jcx,format_bottom)
worksheet2.write_row('D21',jcx,format_bottom)
worksheet3.write_row('D11',fuzai_jcx,format_bottom)
worksheet3.write_row('D21',fuzai_jcx,format_bottom)
worksheet3.write_row('D31',fuzai_jcx,format_bottom)
worksheet3.write_row('D41',fuzai_jcx,format_bottom)
 
# 这边开始根据之前与设备交互所得到的数据文件内容来填格子了。
 
#------------------------------------------------
#----------firewall_ip1----------------
#------------------------------------------------
 
try:
 hang=1
 temp=[]
 hang_list=cmd("HRP_M<JSYD-WX-12580-DMZ-E8000E-1>",file_01)
 rules=[]
 g=0
 with open(file_01) as f:
 for each_line in f:
  num=each_line.split()
  if hang > int(hang_list[1]) and hang < int(hang_list[2]):
  if int(hang_list[2])-int(hang_list[1]) == 6:
  worksheet0.write('G2',u'正常',format_rt)
  else:
  worksheet0.write('G2','ERROR',format_red)
  if hang > int(hang_list[2]) and hang < int(hang_list[3]):
  if num!=[]:
  if num[0] == 'HUAWEI':
   worksheet0.write('G3',u'%s天，%s小时'%(num[4],num[6]),format_rt)
  if hang > int(hang_list[3]) and hang < int(hang_list[4]):
  if num!=[]:
  if len(num) == 11:
   temp.append(num[-1])
  if hang > int(hang_list[4]) and hang < int(hang_list[5]):
  if num!=[]:
  if ',' in num[0]:
   total=num[0].replace(',','')+' KB '+num[3].replace(',','')+' KB)'
   worksheet0.write('G5',total,format_rt)
  if hang > int(hang_list[5]) and hang < int(hang_list[6]):
  if num!=[]:
  if num[0] == 'Memory':
   worksheet0.write('G7',num[-1],format_rt)
  if hang > int(hang_list[6]) and hang < int(hang_list[7]):
  if num!=[]:
  if num[0] == 'Role:':
   if num[1] == 'active,' and num[-1] == 'standby':
   worksheet0.write('G8',u'正常',format_rt)
   else:
   worksheet0.write('G8',u'有',format_red)
  if hang > int(hang_list[7]) and hang < int(hang_list[8]):
  if num!=[]:
  if num[0] == 'Current':
   worksheet0.write('G9',str(num[-1]),format_rt)
  if hang > int(hang_list[8]) and hang < int(hang_list[9]):
  if num!=[]:
  if num[0] == 'Destinations' and len(num) == 10:
   worksheet0.write('G10',str(num[2]),format_rt)
  if hang > int(hang_list[9]) and hang < int(hang_list[10]):
  if num!=[]:
  if len(num) == 7:
   if num[1] == 'up':
   g+=1
  if hang > int(hang_list[10]) and hang < int(hang_list[14]):
  if num!=[]:
  if num[0] == 'Advanced':
   rules.append(num[3])
  if hang > int(hang_list[14]) and hang < int(hang_list[15]):
  if int(hang_list[-2])-int(hang_list[-3]) == 8:
  worksheet0.write('G13',u'无告警',format_rt)
  else:
  worksheet0.write('G13',u'有告警',format_red)
  if hang > int(hang_list[15]) and hang < int(hang_list[16]):
  pass
  hang = hang + 1
 temp.sort()
 worksheet0.write('G4',u'%s℃-%s℃'%(temp[0],temp[-1]),format_rt)
 worksheet0.write('G6',None,format_rt)
 worksheet0.write('G11',g,format_rt)
 worksheet0.write('G12','%s+%s+%s+%s=%d'%(rules[0],rules[1],rules[2],rules[3],int(rules[0])+int(rules[1])+int(rules[2])+int(rules[3])),format_rt)
 worksheet0.write('G14',u'正常',format_right)
except IOError as reason:
 print "01DMZ-E8000E.py "+str(reason)
 
 
 
#------------------------------------------------
#----------firewall_iP2----------------
#------------------------------------------------
try:
 hang=1
 state=dict()
 hang_list=cmd("<W-12580-M9006>",file_02_2)
 temp=[]
 rules=0
 mem=[]
 g=0
 all=0
 n=0
 level=0
 q=0
 status=0
 type=0
 with open(file_02_2) as f:
 for each_line in f:
  num=each_line.split()
  if hang > int(hang_list[0]) and hang < int(hang_list[1]):
  if num!=[]:
  if num[0].isdigit() and len(num) == 7:
   if num[3] == 'Absent':
   if num[2] != 'NONE':
   type=1
  if hang > int(hang_list[1]) and hang < int(hang_list[2]):
  if num!=[]:
  if len(num) == 13:
   worksheet0.write('G16',u'%d天，%s小时'%(int(num[5])*7+int(num[7]),num[9]),format_rt)
  if hang > int(hang_list[2]) and hang < int(hang_list[3]):
  if num!=[]:
  if len(num) == 9:
   temp.append(num[4])
  if hang > int(hang_list[3]) and hang < int(hang_list[4]):
  if num!=[]:
  if len(num) == 6:
   total='%s KB %s KB)'%(num[0],num[3])
   worksheet0.write('G18',total,format_rt)
  if hang > int(hang_list[4]) and hang < int(hang_list[5]):
  if num!=[]:
  if len(num) == 8:
   if num[-1] != 'KB:':
   result='%.1f%%'%(100-float(num[-1].split('%')[0]))
   mem.append(result)
  if hang > int(hang_list[5]) and hang < int(hang_list[6]):
  if num!=[]:
  if 'GigabitEthernet' in num[1]:
   if num[2] != 'UP':
   status+=1
  if 'GigabitEthernet' in num[0]:
   if num[1] != 'UP':
   status+=1
  if hang > int(hang_list[6]) and hang < int(hang_list[7]):
  if num!=[]:
  if num[0].isdigit() and len(num) == 5:
   if num[3] != 'Primary' and num[3] != 'Secondary':
   q=1
  if hang > int(hang_list[7]) and hang < int(hang_list[8]):
  if num!=[]:
  if num[0].isdigit() and len(num) == 9:
   g+=1
  if hang > int(hang_list[8]) and hang < int(hang_list[9]):
  if num!=[]:
  if num[0] == 'Summary':
   state[n]=num[3]
   n+=1
  if hang > int(hang_list[9]) and hang < int(hang_list[10]):
  if num!=[]:
  if len(num) >= 4 and num[1] == 'UP':
   all+=1
  if hang > int(hang_list[10]) and hang < int(hang_list[12]):
  if num!=[]:
  if num[0] == 'rule':
   rules+=1
  if hang > int(hang_list[12]) and hang < int(hang_list[13]):
  if num!=[]:
  if num[0].isdigit() and len(num) >5:
   if num[3] != 'INFO':
   level=1
  if hang > int(hang_list[13]) and hang < int(hang_list[14]):
  pass
  hang+=1
 temp.sort()
 mem.sort()
 if type == 0:
  worksheet0.write('G15',u'正常',format_rt)
 else:
  worksheet0.write('G15','ERROR',format_red)
 worksheet0.write('G17',u'%s℃-%s℃'%(temp[0],temp[-1]),format_rt)
 worksheet0.write('G19',None,format_rt)
 worksheet0.write('G20','%s-%s'%(mem[0],mem[-1]),format_rt)
 if status == 0:
  worksheet0.write('G21',u'正常',format_rt)
 else:
  worksheet0.write('G21',status,format_rt)
 if q == 0:
  worksheet0.write('G22',u'正常',format_rt)
 else:
  worksheet0.write('G22',u'有',format_red)
 worksheet0.write('G23',g,format_rt)
 worksheet0.write('G24',state[0],format_rt)
 worksheet0.write('G25',all,format_rt)
 worksheet0.write('G26','%d'%rules,format_rt)
 if level == 1:
  worksheet0.write('G27','ERROR',format_red)
 else:
  worksheet0.write('G27',u'无告警',format_rt)
 worksheet0.write('G28',u'正常',format_right)
except IOError as reason:
 print "02DMZ-M9006.py "+str(reason)
 
 
 
 
 
#------------------------------------------------
#----------firewall_ip3----------------
#------------------------------------------------
try:
 hang=1
 state=dict()
 hang_list=cmd("<W-SM-M9006>",file_02_1)
 temp=[]
 rules=[]
 mem=[]
 g=0
 all=0
 n=0
 level=0
 q=0
 status=0
 type=0
 with open(file_02_1) as f:
 for each_line in f:
  num=each_line.split()
  if hang > int(hang_list[0]) and hang < int(hang_list[1]):
  if num!=[]:
  if num[0].isdigit() and len(num) == 7:
   if num[3] == 'Absent':
   if num[2] != 'NONE':
   type=1
  if hang > int(hang_list[1]) and hang < int(hang_list[2]):
  if num!=[]:
  if len(num) == 13:
   worksheet0.write('G30',u'%d天，%s小时'%(int(num[5])*7+int(num[7]),num[9]),format_rt)
  if hang > int(hang_list[2]) and hang < int(hang_list[3]):
  if num!=[]:
  if len(num) == 9:
   temp.append(num[4])
  if hang > int(hang_list[3]) and hang < int(hang_list[4]):
  if num!=[]:
  if len(num) == 6:
   total='%s KB %s KB)'%(num[0],num[3])
   worksheet0.write('G32',total,format_rt)
  if hang > int(hang_list[4]) and hang < int(hang_list[5]):
  if num!=[]:
  if len(num) == 8:
   if num[-1] != 'KB:':
   result='%.1f%%'%(100-float(num[-1].split('%')[0]))
   mem.append(result) 
  if hang > int(hang_list[5]) and hang < int(hang_list[6]):
  if num!=[]:
  if 'GigabitEthernet' in num[1]:
   if num[2] != 'UP':
   status=1
  if 'GigabitEthernet' in num[0]:
   if num[1] != 'UP':
   status=1
  if hang > int(hang_list[6]) and hang < int(hang_list[7]):
  if num!=[]:
  if num[0].isdigit() and len(num) == 5:
   if num[3] != 'Primary' and num[3] != 'Secondary':
   q=1
  if hang > int(hang_list[7]) and hang < int(hang_list[8]):
  if num!=[]:
  if num[0].isdigit() and len(num) == 9:
   g+=1
  if hang > int(hang_list[8]) and hang < int(hang_list[9]):
  if num!=[]:
  if num[0] == 'Summary':
   state[n]=num[3]
   n+=1
  if hang > int(hang_list[9]) and hang < int(hang_list[10]):
  if num!=[]:
  if len(num) >= 4 and num[1] == 'UP':
   all+=1
  if hang > int(hang_list[10]) and hang < int(hang_list[12]):
  if num!=[]:
  if num[0] == 'Advanced':
   rules.append(num[5])
  if hang > int(hang_list[12]) and hang < int(hang_list[13]):
  if num!=[]:
  if num[0].isdigit() and len(num) >5:
   if num[3] != 'INFO':
   level=1
  if hang > int(hang_list[13]) and hang < int(hang_list[14]):
  pass 
  hang+=1
 temp.sort()
 mem.sort()
 if type == 0:
  worksheet0.write('G29',u'正常',format_rt)
 else:
  worksheet0.write('G29','ERROR',format_red)
 worksheet0.write('G31',u'%s℃-%s℃'%(temp[0],temp[-1]),format_rt)
 worksheet0.write('G33',None,format_rt)
 worksheet0.write('G34','%s-%s'%(mem[0],mem[-1]),format_rt)
 if status == 0:
  worksheet0.write('G35',u'正常',format_rt)
 else:
  worksheet0.write('G35','ERROR',format_red)
 if q == 0:
  worksheet0.write('G36',u'正常',format_rt)
 else:
  worksheet0.write('G36',u'有',format_red)
 worksheet0.write('G37',g,format_rt)
 worksheet0.write('G38',state[0],format_rt)
 worksheet0.write('G39',all,format_rt)
 worksheet0.write('G40','%s+%s=%d'%(rules[0],rules[1],int(rules[0])+int(rules[1])),format_rt)
 if level == 1:
  worksheet0.write('G41','ERROR',format_red)
 else:
  worksheet0.write('G41',u'无告警',format_rt)
 worksheet0.write('G42',u'正常',format_right)
except IOError as reason:
 print "03SM-M9006.py "+str(reason)
 
 
#------------------------------------------------
#----------firewall_ip4----------------
#------------------------------------------------
 
try:
 hang=1
 g=0
 hang_list=cmd("W-IN-FG3950-1 #",file_03)
 with open(file_03) as f:
 for each_line in f:
  num=each_line.split()
  if hang > int(hang_list[0]) and hang < int(hang_list[1]):
  if num!=[]:
  if num[0] == 'Memory':
   worksheet0.write('G45',num[2],format_rt)
  if len(num) == 8 and num[1] == 'Uptime:':
   worksheet0.write('G43',u'%s天，%s小时'%(num[2],num[4]),format_rt)
  if num[0] == 'Average':
   if num[1] == 'network':
   worksheet0.write('G46',num[-5],format_rt)
  if hang > int(hang_list[1]) and hang < int(hang_list[2]):
  if num!=[]:
  if num[0] == "misc":
   session_count=num[2].split('=')
   setup_rate=num[3].split('=')
   worksheet0.write('G47',session_count[-1],format_rt)
   worksheet0.write('G48',setup_rate[-1],format_rt)
  if hang > int(hang_list[2]) and hang < int(hang_list[3]):
  if num!=[]:
  if 'S' in num[0] and len(num) >= 6:
   g+=1
  hang+=1
 worksheet0.write('G51',g,format_rt)
 worksheet0.write('G44',None,format_rt)
 worksheet0.write('G49',None,format_rt)
 worksheet0.write('G50',None,format_rt)
 worksheet0.write('G52',None,format_rt)
 worksheet0.write('G53',None,format_rt)
 worksheet0.write('G54',None,format_right)
except IOError as reason:
 print "04IN-FG3950B.py "+str(reason)
 
#------------------------------------------------
#------------switch_ip5----------------
#------------switch_ip6----------------
#------------------------------------------------
try:
 for i in range(2):
 hang=1
 alarm=0
 state=0
 status=0
 alm=0
 temp_list=[]
 index={0:list(range(2,15)),1:list(range(15,28))}
 file='/usr/sh/shell/linux/xunjian/'+str(today)+'/0'+str(i+5)+'DMZ-S9306-'+str(i+1)+'.txt'
 hang_list=cmd('<JSYD-WX-12580-DMZ-9306-%d>'%(i+1),file)
 with open(file) as f:
  for each_line in f:
  num=each_line.split()
  if hang > int(hang_list[1]) and hang < int(hang_list[2]):
  if num!=[]:
   if len(num) == 8 and num[1] == '-':
   if num[-2] != 'Normal':
   alarm=1
  if hang > int(hang_list[2]) and hang < int(hang_list[3]):
  if num!=[]:
   if num[0] == 'Quidway':
   worksheet1.write('G'+str(index[i][1]),u'%d天, %s小时'%(int(num[7])*7+int(num[9]),num[11]),format_rt)
  if hang > int(hang_list[3]) and hang < int(hang_list[4]):
  if num!=[]:
   if len(num) == 6 and num[1] == 'KB':
   mem=num[0].split(',')
   free=num[3].split(',')
   worksheet1.write('G'+str(index[i][2]),'%s KB %s KB)'%(mem[0]+mem[1],free[0]+free[1]),format_rt)
  if hang > int(hang_list[4]) and hang < int(hang_list[5]):
  if num!=[]:
   if len(num) == 6 and num[4] == 'Max:':
   worksheet1.write('G'+str(index[i][3]),num[3],format_rt)
  if hang > int(hang_list[5]) and hang < int(hang_list[6]):
  if num!=[]:
   if len(num) == 5 and num[0] == 'Memory':
   worksheet1.write('G'+str(index[i][4]),num[-1],format_rt)
  if hang > int(hang_list[6]) and hang < int(hang_list[7]):
  if num!=[]:
   if len(num) >=6 and num[1] == 'up':
   state+=1
  if hang > int(hang_list[7]) and hang < int(hang_list[8]):
  if num!=[]:
   if num[0].isdigit() and len(num) == 5:
   if i == 0 and num[1] != 'Master':
   status=1
   if i == 1 and num[1] != 'Backup':
   status=1
  if hang > int(hang_list[8]) and hang < int(hang_list[9]):
  if num!=[]:
   if num[0] == 'Total':
   worksheet1.write('G'+str(index[i][7]),num[-1],format_rt)
  if hang > int(hang_list[9]) and hang < int(hang_list[10]):
  if num!=[]:
   if num[0] == 'Dynamic:':
   worksheet1.write('G'+str(index[i][8]),num[1],format_rt)
  if hang > int(hang_list[10]) and hang < int(hang_list[11]):
  if num!=[]:
   if num[0] == 'Destinations' and len(num) == 10:
   worksheet1.write('G'+str(index[i][9]),num[2],format_rt)
  if hang > int(hang_list[11]) and hang < int(hang_list[12]):
  if num!=[]:
   if len(num) >= 6 and num[-5].isdigit():
   temp=num[-1].split('.')
   temp_list.append(temp[0])
  if hang > int(hang_list[12]) and hang < int(hang_list[13]):
  if num!=[]:
   if len(num) == 2 and num[0] == 'NO' and num[1] == 'alarm':
   alm = 1
  if hang > int(hang_list[13]) and hang < int(hang_list[14]):
  if num!=[]:
   pass
  hang+=1
  temp_list.sort()
  if alarm == 0:
  worksheet1.write('G'+str(index[i][0]),u'正常',format_rt)
  else:
  worksheet1.write('G'+str(index[i][0]),'ERROR',format_red)
  worksheet1.write('G'+str(index[i][5]),state,format_rt)
  if i == 0:
  if status == 0:
  worksheet1.write('G'+str(index[i][6]),'Master',format_rt)
  else:
  worksheet1.write('G'+str(index[i][6]),'No Master',format_red)
  else:
  if status == 0:
  worksheet1.write('G'+str(index[i][6]),'Backup',format_rt)
  else:
  worksheet1.write('G'+str(index[i][6]),'No Backup',format_red)
  worksheet1.write('G'+str(index[i][10]),u'%s℃-%s℃'%(temp_list[0],temp_list[-1]),format_rt)
  if alm == 1:
  worksheet1.write('G'+str(index[i][11]),u'无告警',format_rt)
  else:
  worksheet1.write('G'+str(index[i][11]),u'有告警',format_red)
  worksheet1.write('G'+str(index[i][12]),u'正常',format_right)
  
except IOError as reason:
 print "05_06DMZ-S9306.py "+str(reason)
 
#------------------------------------------------
#------------switch_ip7----------------
#------------switch_ip8----------------
#------------------------------------------------
 
try:
 fi_list=['07DMZ-S12508.txt']
 fi_name=['<W-DMZ-G1G2-12508>']
 state=[]
 for i in range(1):
 hang=1
 file='/usr/sh/shell/linux/xunjian/'+str(today)+'/'+fi_list[i]
 hang_list=cmd(fi_name[i],file)
 brd_status=['Master','Slave','Absent']
 brd=0
 link=0
 Master=0
 Backup=0
 count=[]
 temp=[]
 alarm=0
 status=0
 index={0:list(range(28,41))}
 with open(file) as f:
  for each_line in f:
  num=each_line.split()
  if hang > int(hang_list[1]) and hang < int(hang_list[2]):
  if num!=[]:
   if num[0].isdigit() and len(num) == 4:
   if num[2] not in brd_status:
   brd=1
  if hang > int(hang_list[2]) and hang < int(hang_list[3]):
  if num!=[]:
   if len(num) == 12:
   worksheet1.write('G'+str(index[i][1]),u'%d天, %s小时'%(int(num[4])*7+int(num[6]),num[8]),format_rt)
  if hang > int(hang_list[3]) and hang < int(hang_list[4]):
  if num!=[]:
   if len(num) == 6 and num[1] == 'KB':
   worksheet1.write('G'+str(index[i][2]),'%s KB %s KB)'%(num[0],num[3]),format_rt)
  if hang > int(hang_list[4]) and hang < int(hang_list[5]):
  if num!=[]:
   if num[0] == 'Used':
   worksheet1.write('G'+str(index[i][4]),num[-1],format_rt)
  if hang > int(hang_list[5]) and hang < int(hang_list[6]):
  if num!=[]:
   if 'GigabitEthernet' in num[1]:
   if num[2] != 'UP':
   status+=1
   if 'GigabitEthernet' in num[0]:
   if num[1] != 'UP':
   status+=1 
  if hang > int(hang_list[6]) and hang < int(hang_list[7]):
  if num!=[]:
   if len(num) >=2 and num[1] == 'UP':
   link+=1
   #if num[0] == '----' and num[5] == 'UP':
   # link+=1
  if hang > int(hang_list[7]) and hang < int(hang_list[8]):
  if num!=[]:
   if num[0].isdigit():
   worksheet1.write('G'+str(index[i][7]),num[0],format_rt)
  if hang > int(hang_list[8]) and hang < int(hang_list[9]):
  if num!=[]:
   if num[0] == 'Total' and num[-1].isdigit():
   worksheet1.write('G'+str(index[i][8]),num[-1],format_rt)
  if hang > int(hang_list[9]) and hang < int(hang_list[11]):
  if num!=[]:
   if num[0] == 'Summary' and num[-1].isdigit():
   count.append(num[-1])
  if hang > int(hang_list[11]) and hang < int(hang_list[12]):
  pass
  if hang > int(hang_list[12]) and hang < int(hang_list[13]):
  if num!=[]:
   if len(num) >= 8:
   if num[3].isdigit():
   temp.append(num[3])
   if num[0] == '----' and num[1] == 'More':
   temp.append(num[7])
  if hang > int(hang_list[13]) and hang < int(hang_list[14]):
  if num!=[]:
   if num[0] == 'No' and num[1] == 'alarm':
   alarm=1
  if hang > int(hang_list[14]) and hang < int(hang_list[15]):
  if num!=[]:
   pass
  hang+=1
  temp.sort()
  if brd == 0:
  worksheet1.write('G'+str(index[i][0]),u'正常',format_rt)
  else:
  worksheet1.write('G'+str(index[i][0]),'ERROR',format_red)
  if status == 0:
  worksheet1.write('G'+str(index[i][5]),u'正常',format_rt)
  else:
  worksheet1.write('G'+str(index[i][5]),status,format_rt)
  worksheet1.write('G'+str(index[i][3]),None,format_rt)
  worksheet1.write('G'+str(index[i][6]),link,format_rt)
  worksheet1.write('G'+str(index[i][9]),int(count[1])+i